Jeep 2005 Grand Cherokee Logo

Related Tags:

Problem with Jeep 2005 Grand Cherokee

how to install idler pulley and serpentine belt

Posted by avatar on Jan 25, 2010

Solutions (1)

sir andre her ihav ea problem whit a chey transsport from 1997
i had trection cotrol on en de egine go of after that i try to put it on agian an than i here like the egine whas running on five cilinder can you tel me please what that problem is

Suggested Solution (3)

Here you go.. I looked up the same belt you did, it should be right.

  • by Author image Dave Real Over a year ago

Source: Serpentine belt routing

Was this solution helpful?

No

Yes

That wasn't right though. There is a 1/2 slot for a 1/2 inch breaker bar and when two holes are lined up you stick a drill bit or similar peice through to lock it in place till you get the belt routed then pull back alittle bit on the breaker bar to remove tension from the drill bit . Remove the drill bit and release tension on breaker bar and remove it to put tension on the belt.Then check alignment , positioning, routing of the belt visually.

  • by Author image asitiswrittN Over a year ago

Source: how do you loosen the serpentine belt

Was this solution helpful?

No

Yes

Hey Joe!
I've sent you links to free downloads of Ford Shop Manuals and a serpentine belt / pulley diagram... If you have any problems, you kwow where to find me!
-WB

  • by Author image Bill Bellomy Over a year ago

Source: Serpentine Belt on a 1999 Ford Escort ZX2

Was this solution helpful?

No

Yes

Add Your Solution

Jeep 2005 Grand Cherokee Unsolved Problems

See all Jeep 2005 Grand Cherokee Problems

Related Topics