At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Replace the oil sensor. I've also seen this happen when someone puts in custom stereo equipment and draws power off the oil gauge in the dash. See if it happens with the stereo off.
have the oil pressure checked with an independent gage as sometimes gages in the dash don`t show correct pressure. how long has it been since the oil was changed as oil when it gets dirty it thins out and can affect oil pressure. if you don`t hear any ticking with the motor running chances are the pressure is either good or just a little low. testing oil pressure with an independent gage will tell the tale.
I would want to know what the actual oil pressure is. The sending unit or the gauge on the dash could have failed.
There is a pressure relief valve to prevent oil pressure from going too high, but staying at 80psi would not be good for a long time.
Sounds like a weak oil pump at higher rpm the pump creates more pressure which is adaquate to make the light go out and supply oil to the engine. At lower rpm your oil pump is not creating the pressure needed. Be carefull not to let it idle or sit in park to long this could damage the engine. There is oil pressure sending unit also this is what makes the light come on and it also shows the oil pressure on the oil gage on dash if your vehicle is equipped with gage. The sending unit could be faulty, but play it safe and have your mechanic diagnose the problem.
Change the oil filter. It could be clogged. That would cause an increase in oil pressure. You dont wanna blow a main seal so do it promptly. If that isnt the problem, then you might want to consider consulting a local ASE Certified mechanic to help better diagnose the problem. Good Luck.
All you have to do is replace your oil pressure sending unit.It`s in the rear of the motor by the left head.This is the drivers side.You need a special socket to remove the sending unit.Good luck.
×