2000 Honda Accord Logo

Related Topics:

Anonymous Posted on Jan 17, 2010

My 00 accord's blinkers dont work the relay clicks the fuse is good hazards work and bulbs are good could it be the stalk?

  • Anonymous Jan 18, 2010

    thanks, but that did work. do you know of any other year honda that uses the same stalk? im having trouble finding a 00 accord to pull it from at the junk yard.

×

1 Answer

Colin Stickland

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Honda Master 22,516 Answers
  • Posted on Jan 17, 2010
Colin Stickland
Honda Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Nov 04, 2008
Answers
22516
Questions
3
Helped
6997975
Points
66324

Yep its decided its life span is up ,try wiggling the connector block connections first

  • Colin Stickland
    Colin Stickland Jan 20, 2010

    new is not expensive from a auto factor ,but to get the trade discount ,spoof up a phoney letter head on the computer and walk in with overhauls on ,then you could get as much as 30/50% off the retail price

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2001 4 Runner blinker problem

The hazards use a separate relay. listen for signal relay clicking to locate the correct relay. Consult your owners manual for fuse and relay layout.
0helpful
1answer

Turn signal hazard lights work but not running lights

The parking lights should be on a different circuit from turn signals - hazard lights. The bulbs usually have two filaments, one for each circuit.
On most models there is a tail light fuse and relay that handles front and rear parking lights.
0helpful
1answer

Hazards dont work but blinkers do

Blinkers and hazards normally work on the same fuse. Sounds like the hazard switch has a problem.Get the hazard switch out and bridge the two connector wires to the switch. If the hazards then work the problem is in the switch.If it don't work you may have a problem in the wiring between the switch and the flasher relay.
0helpful
1answer

Blinkers dont work. flashers work

Most GM the blinkers and flashers have seperate relays. But if see your flashers work you know the bulbs are good. So there is one thing out of the way.

The turn signal relay should be a two prong relay on the interior fuse panel. The hazard relay would be one with three. The hazard relay may be on a "convienience" center which is usually tucked way up under the dash.
2helpful
1answer

Blinker switch has been changed and bulbs have been checked wiring has been checked, flasher has been changed hazards work front and rear but when you turn blinkers on they don't work.

Flasher relay under the dash needs replaced. Go to auto store buy a new one. Unplug old one and insert new one. If that doesnt do the trick it is probably the column stalk for the blinker needs replaced.
0helpful
1answer

1992 toyota sr5 auto loaded blinkers quit working relay makes one click but no flash of any lights. indicator lights in dash dont come on and stay on as i have seen in the past when a typical relay goes...

check all the bulbs .... one is very likely burnt out that tends to happen. i would also consider that the known good relay could very well be defective too (it happens).
2helpful
2answers

96 Dodge Grand Caravan. blinkers not working

check the fuse and relay that control the blinkers, also check all bulbs make sure they are good
0helpful
1answer
0helpful
1answer

Blinkers on 1999 chevy 2500

have you walked around and check the turn signal bulbs and sockets for burned bulbs and/or corrosion? if so then you might want to look at getting a new turn signal handle " stalk" . good luck and let me know what you find out.
0helpful
1answer

1992 honda accord LX Blinkers

check the hazard switch ive seen them stick or wear out and nothing works. good luck also look for a bulb with only one prong on the end of the bulb it will short the dash lights to keep signal on
Not finding what you are looking for?

115 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...