Sorry i donot have diagram for the procedure. But the procedure is given below:
Each of the headlight assemblies are braced through the radiator support with a pair of retainers. The retainers for the right headlight
assembly are in front of the battery. The retainers for the left
assembly are in front of the washer fluid reservoir. Remove the
retainers by pulling up on the retainer. With the retainers removed,
the headlamp assembly falls forward. Reinstall the retainers to the
square tabs on the headlamp assembly and the rivet on the radiator
support
Theres three screws that go into the headlight assmlys from the top! to remove the housings and then un twist the bulb sockets
325 views
Usually answered in minutes!
replace headlight bulb in 2002 oldsmobile bravada
×