At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
2003 sante fe. P0350 code on scanner. one plug was much wetter then others. changed coil, worked for 10 miles. now runs rough again but no check engine light this time. HELP !!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P0351 - Ignition Coil A Primary/Secondary Circuit
Description:
See the description for DTC P0350.
Possible Causes:
See the possible causes for DTC P0350.
Diagnostic Aids:
See the diagnostic aids for DTC P0350.
Application Key On Engine Off Key On Engine Running Continuous Memory
Coil-on-plug (COP) ignition testing
-
GO to Pinpoint Test JF .
GO to Pinpoint Test JF .
Coil pack ignition testing
-
GO to Pinpoint Test JE .
GO to Pinpoint Test JE .
P0352 - Ignition Coil B Primary/Secondary Circuit
Description:
See the description for DTC P0350.
Possible Causes:
See the possible causes for DTC P0350.
Diagnostic Aids:
See the diagnostic aids for DTC P0350.
Application Key On Engine Off Key On Engine Running Continuous Memory
Coil-on-plug (COP) ignition testing
-
GO to Pinpoint Test JF .
GO to Pinpoint Test JF .
Coil pack ignition testing
-
GO to Pinpoint Test JE .
GO to Pinpoint Test JE .
P0353 - Ignition Coil C Primary/Secondary Circuit
Description:
See the description for DTC P0350.
Possible Causes:
See the possible causes for DTC P0350.
Diagnostic Aids:
See the diagnostic aids for DTC P0350.
Application Key On Engine Off Key On Engine Running Continuous Memory
Coil-on-plug (COP) ignition testing
-
GO to Pinpoint Test JF .
GO to Pinpoint Test JF .
Coil pack ignition testing
-
GO to Pinpoint Test JE .
GO to Pinpoint Test JE .
P0354 - Ignition Coil D Primary/Secondary Circuit
Description:
See the description for DTC P0350.
Possible Causes:
See the possible causes for DTC P0350.
Diagnostic Aids:
See the diagnostic aids for DTC P0350.
Application Key On Engine Off Key On Engine Running Continuous Memory
Coil-on-plug (COP) ignition testing
-
GO to Pinpoint Test JF .
GO to Pinpoint Test JF .
Coil pack ignition testing
-
GO to Pinpoint Test JE .
GO to Pinpoint Test JE .
? 9:37 https://www.youtube.com/watch?v=jsQcLya1YLQ
Jan 24, 2014 - Uploaded by jimthecarguy
No Start Cranks Ok No Injection Pulse 2002 Hyundai Accent Easy Step By Step ... and car cut off, but would not restart. it sounds like it is starving for fuel. ... hi nice video man . i have no sparkno fuel .u think its the main? it was ...
Do you mean P0301, P0302, etc? Misfire codes? You have 6 plugs, 3 coil packs, and 3 wires. cyl 2,4,6 are the ones in front, with the coil packs. It's possible they're bad.
Most likely the coils. Easiest way to check is swap them with another cylinder, start it, pull the plug wire connecter and if it doesn't change the engine the coil is bad. If it is the injector, then you can check it with an ohm meter. Touch the leads in the injector it should read 11 to 15 ohms. if you need help let me know.
Randy
YOU HAVE POOR CONNECTION AT IGNITION COIL OR ECM.OR IGNITION COIL IS FAULTY.YOU CAN HAVE HIGH RESISTANCE IN THE GROUND CIRCUIT FOR THE IGNITION COIL.HAS TO BE ONE OR THE OTHER.
Ok P0174 Is bank 2 (drivers side) is running lean
P0350 is an ignition coil primary circuit malfunction
P1127 indicates the HO2S heater(s) were not on during KOER Self-Test and testing of the HO2S did not occur.Engine not operating long enough prior to performing KOERSelf-Test.
P1780 means that the OD switch on gear shifter was not cycled off then on during self test.
I would recommend re-running your self test and make sure to warm the engine up first and make sure to cycle the od switch on/off during the test and recheck the codes.
P0174 lean code could be caused by a miss-fire and P0350 could be caused by anything in the ignition(coil,plug,wires,etc.).
If the P0174 and P0350 repeat I would concentrate on the cylinders in bank 2. If you have a spark tester you could hook it to each of those plug wires individually and look for a weak spark. or try and unhook each wire one at a time and see if you can find a weak cylinder that way by the amount of rpm drop and replace the components on that cylinder and retest.
×