Why did the security theft system lock up the windows key wont come out the ignitio. how do i fix

question edited for clarity.

Some Semi work on 24 volts!

An overwhelming majority of Class 8 commercial vehicles in North America operate on a 12V electrical system throughout both the tractor and trailer. In some instances, a 24V electrical system is in place. However, there is a potential shift looming in the not-so-distant future to higher voltages.
Jun 17, 2020

Probably need to do anti-theft reset, but have a feeling a module is damaged because of the Semi voltage.

First You need to lock all the doors and then unlock the driver's side only using Your key manually. Now get in to the vehicle and put the key in the ignition. Next move the key in to the on position and then back off. Repeat these steps one more time, turn the vehicle on and off with about one second in between.

How do i do a 2006 dodge ram security system reset?

https://www.vehiclehistory.com > questions > how-do-i-d...
How do I get my Dodge Ram out of theft mode?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;">
How do you reset the security system on a 2005 Dodge Ram?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> How do you reset the anti theft system?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> How do I reset my ram 2500?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> Feedback Web results

How do i reset the 2006 Dodge ram security system? - Vehicle ...

https://www.vehiclehistory.com > questions > how-do-i-...
To reset the alarm on the 2006 dodge ram you need to lock all the doors, then unlock the driver side and put the key into the on position. Now turn it off and ...
2 answers · Top answer: The simplest way to fix some faults with the anti-theft security system in the 2006 Dodge Ram is to remove the negative battery cable for ten to ...

How to reset the anti theft - DodgeForum.com

https://dodgeforum.com > ... > 3rd Gen Ram Tech
Apr 6, 2019 - Exit the car with all doors closed and the windows rolled up. Also close and any rear doors such as the trunk, rear hatch and front hood. Lock ...
2006 Dodge Ram 1500 Security System problems
Apr 12, 2017
06 cummins wont start, security light / remote start problems
Jun 7, 2013
2003 RAM SECURITY LIGHT ISSUE/NO START - Dodge Forum
Mar 16, 2008
security system reset - DodgeForum.com
Aug 2, 2015
More results from dodgeforum.com

The theft or lock icon is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterprets this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle. This link explains it pretty well.
http://vatspasslockpasskeysecurityhelp.yolasite.com/

The security lock picture/icon is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterperates this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle. This link explains it pretty well.
http://vatspasslockpasskeysecurityhelp.yolasite.com/

The theft light is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterperates this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hot wired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle. This link explains it pretty well.
http://vatspasslockpasskeysecurityhelp.yolasite.com/

you have to take it to dealer to get it reset Chey trucks are the same way

The security light is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterperates this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle.
This link may help you find ways to bypass this or fix it yourself.
http://vatspasslockpasskeysecurityhelp.yolasite.com/

The problem is in the key or ignition. Aside from the key working like a normal key, it also has a chip or transponder in it that is part of the security antitheft system. The key is then read by the ignition and must communicate the correct signal. If there are any break in communication, the system goes into anti theft and locks out the starter. Might be a key issue or an ignition issue. The fact that the light is flashing, indicates key or ignition. If it were solid, then the problem would be the Theft Deterrent Module (TDM) that is the main computer of the security system. You can either fix the problem part, take it to a dealer who is authorized to fix it, or bypass it entirely. This link explains the system and how you can fix it yourself. http://vatspasslockpasskeysecurityhelp.yolasite.com/

TURN ON IGNITION SWITCH TO ON POSITION.ENGINE OFF.REPEATEDLY PRESS VECHICLE INFORMATION BUTTON UNTIL PRESS TO RELEARN REMOTE KEY IS DISPLAYED.PRESS SET RESET BUTTON UNTIL REMOTE KEY LEARNING ACTIVE IS DISPLAYED. IF THAT PROCEDURE DONT WORK.INSERT MASTER KEY INTO IGNITION SWITCH.NOW SWITCH IGNITION ON SWITCH IGNITION OFF.REMOVE MASTER KEY.WITHIN 10 SECONDS INSERT NEW KEY.SWITCH IGNITION ON.ENSURE SYSTEM WARNING LAMP SWITCHES OFF.NEW KEY NOW PROGRAMMED.IF YOU STILL HAVING PROBLEM RESETING THEFT SECURITY SYSTEM THE DEALERSHIP HAS TO FIX.REPROGRAM IT.

SOUND LIKE THE THEFT SECURITY PROBLEMS. MOST OF THE TIME.THE IGNITION KEYS OR IGNITION SWITCH KEY LOCK CYLINDER WORN WHERE THE BCM AND PCM DONT RECOGNIZE KEY OR SWITCH SIGNAL.SO THE BCM AND PCM WILL GO IN THEFT SECURITY MODE.THE DEALERSHIP WILL HAVE TO FIX.BECAUSE IF THE KEYS , IGNITION SWITCH AND LOCK CYLINDER AND BCM HAS TO REPLACED.THEY WILL HAVE TO BE REPROGRAM USING DIAGNOSTIC EQUIPMENT. NOT A HOME FIX.YOU WILL NEED TO GET FIX SOON AS POSSIBLE.BECAUSE FAULTY SECURITY THEFT CODE WILL SHUT DOWN VECHICLE FUEL SYSTEM WHILE DRIVING OR IT WILL GET TO A POINT WHERE CAR WONT START NO MORE.THIS FIX WILL COST ABOUT $600.00.

anti theft if you don't have a codeable radio reset your computer by disconnecting positive cable on battery for 5mins if that does'nt work turn headlights on @ turn key if lights dim probable bad starter