2000 Volkswagen Beetle Logo
Posted on Dec 31, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

The radio is in SAFE mode....

2000 VW BUG. The radio is in SAFE mode probably because the battery was disconnected. I was able to key in the correct factory code and pressed the SEEK key per the manual. A sound was emitted and very briefly I thought I hear the radio coming on, but then it went back to reading 1000 and indicated 1 attempt. I made a second attempt... same thing happened and now it's back in SAFE mode indicating 2 attempts. If I wait 1 hour, I can go through the same process, but the result will be the same. The code is correct but I never saw "LSM" on the read-out and of course the radio is not working as it should when reset properly. Any ideas why it goes back "automatically" into SAFE mode?

1 Answer

Bobby Whitlock

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 90 Answers
  • Posted on Jan 05, 2010
 Bobby Whitlock
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Sep 01, 2009
Answers
90
Questions
2
Helped
38742
Points
207

It has to be the wrong code. You have to take in to the VW dealership, (because of so many stolen radios), they will have to verify your registration. Then they will remove your radio, get the serial number put it in to VW hub<( dealership only VW repair site), and retrieve the correct code. Even though the code shown is in your owners manual should have been the correct code sometimes radios get switched. Question at the end you said you pressed seek- did you hold the right lower arrow button, (scan), in till radio began to play?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Anti-theft radio security code

Will display safe mode but you have to push the on button then you will get the 1000
0helpful
1answer
0helpful
1answer

I have a 99 a6 quattro i have the code for the radio but when i press rbds and pscan buttons nothing happens it is in safe mode and wont let me do the steps to get out of it!

First of all be sure that your four digit security radio code is correct. If you had attempted three times without success to exit from safe mode by inserting the code, radio is blocked in safe mode for a while. Now turn ON the radio (in safe mode), and let it turned ON for one hour, then follow this procedure.
The sequence of VW radio gamma programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.

For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!
1helpful
1answer

In my 200 vw beetle tdi, the radio will not turn on. the fuse is good for the radio, so what else should i try

You need to remove the radio out from the dashboard using special removal VW radio Gamma keys. In the rear face of the unit is placed a fuse (red color) = 10 Amp. Replace blown fuse with a new one. Then you will need to exit the radio out from the security "SAFE" mode.

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from an Volkswagen dealer!


You can find the radio code at: http://www.radio-code.co.uk/
tdisline_701.jpg
The sequence of programming for a 2000 VW Beetle radio Gamma is:
1. Push simultaneous "SCAN" and "RDM" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDM" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDM" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready for use!
1helpful
3answers

I have a VW golf 1999 but I cannot get the safe mode off the radio. Struck in mode with the number 2 in the lethand corner. Any suggestions on how to fix?

IMPORTANT NOTE: You must have the security anti-theft code for your VW radio from the car manufacturer, or from an VW dealer!

The sequence of programming for VW radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
4helpful
2answers

Entering radio codes for a 1998 passet

If you don't have MODE and SCAN buttons ( I didn't ) you can try as above but with TP and TA - they worked for me.
2helpful
1answer

Hi, problem with 2007 VW Citi Golf radio security code.

The radio is in Lock-Out mode. You only get two attempts to enter the code, then it enters Lock-Out mode.
Put the key in ignition and turn on the radio for an hour (maybe a bit more). The radio should reset itself after about an hour and then you can re enter the code.
0helpful
2answers
5helpful
3answers

Vw golf .... alpha...... safe 2

"2 safe" means that your radio was in safe mode, and then the code was improperly entered 2 times. you either need to disconnect your battery and leave it for up to 4 hours (i've been told), or leave your key in the ignition for around an hour.

once it comes out of "2 safe" mode, then it will just say SAFE and give you the numbers 1-0-0-0. You just need to enter the 4 digit code (using your pre-set numbers 1-2-3-4 to change the numbers), then hold the seek > button and your radio should come on.

If you don't have the code, call VW. they'll find your code for free. they did for me. if not they'll charge like $50 or something.
0helpful
1answer

Radio in safe mode

OK do you have the radio in your hands? IF not you have to remove it using the special tools slotted to unlock it and pull it out. The radio serial is etched into it but you have to remove it to see. With this and the car's serial and proof of ownership VW can get the radio code for you. Or they'd be happy to remove it for you as well and get the other info themselves.
Not finding what you are looking for?

1,139 views

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Bradley
Bradley

Level 2 Expert

105 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...