SOURCE: ford-explorer 2005 v6 petrol cylinderhead tightening torques
a part place can give you a print out on the tor spec advance or auto zone
SOURCE: Cylinderhead bolts torque settings
According to my haynes manual for Landrover 200tdi, G - S reg,1989-1998 it goes as follows,
Stage 1:- Tighten all bolts to 30lb ft or 40Nm then
Stage 2:- Angle tighten a further 60 degrees then
Stage 3:- Angle tighten a further 60 degrees again.
SOURCE: I would to know the cylinderhead torque for a 3c 2.2 diesel
1st 48ft-lbf
2nd turn 90 degrees
3rd turn 90 degrees
Testimonial: "Hi, that was very helpful, I appreciate it very much. Thank you. Even thou I didn't get the sequence and stages of the torque"
388 views
Usually answered in minutes!
×