Question about 2003 Ford Crown Victoria

1 Answer

Turn signal lamp is inside of headlamp housing

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,420 Answers

You want to change the turn signal light? front yes to what ever side you need to change the access is to the back of the head light assy. Front Turn Signal Light Bulb Size: 1157A
Rear Turn Signal Light Bulb Size: 1157
check too owners manual will show you how to thanks Lee let me know how it goes thanx

Posted on Dec 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 gmc envoy day time running lights and low beams not working


You very well could have a couple of faulty relays 45 & 46 in the underhood fuse / relay box . Could also have DTC'S - diagnostic trouble code's stored in the BCM - body control module .
DTC B2575 Headlamp Control Circuit
When the body control module (BCM) senses a request for headlamp or daytime running lamp (DRL) illumination, the BCM sends a pulse width modulated (PWM) ground signal to the low beam headlamp driver module through the low beam headlamp driver module control circuit. The low beam headlamp driver module will illuminate the headlamps, adjusting the intensity based on the PWM signal received.
DTC B2585 Park Lamp Control Circuit
When the body control module (BCM) receives a ground signal from the headlamp switch commanding to illuminate the park lamps, the BCM will energize the park lamp relay by grounding the park lamp relay control circuit.
DTC B3802 Park Lamps Request Circuit
The body control module (BCM) monitors the park lamp switch signal circuit and the headlamp switch headlamps on signal circuit in order to determine when the park lamps and headlamps should be illuminated. When the headlamp switch is turned to PARK, the BCM senses that the park lamp switch signal circuit is grounded and the headlamps switch headlamps on signal circuit is open. The BCM will then energize the park lamp relay illuminating the park lamps. When the headlamp switch is turned to HEAD, the BCM senses that the park lamp switch signal circuit and the headlamp switch headlamps on signal circuit are grounded. The BCM will then energize the park lamp relay and headlamp driver module (HDM) illuminating the park lamps and headlamps.
relay # 46 is the HDM headlamp driver module .

Sep 11, 2018 | GMC Cars & Trucks

1 Answer

Headlights turn on signals turn off idk whats up with that 05 uplander


Headlights turn on signals turn off ???? IF you signal for a turn an then turn on the headlamps the turn signal shut's off ? Do you know anything about automotive electronic's , BCM - body control modules etc.... The turn signals on your vehicle are controlled by the BCM .
The STOP/TURN fuse in the instrument panel (I/P) fuse block supplies battery positive voltage to the body control module (BCM) for the turn signal lamps. When the turn switch is placed in the left or right position, ground is applied to the BCM on the left or right turn signal switch signal circuit. The BCM then applies voltage to the appropriate front and rear supply voltage circuits.
Grounds for the various lamps are as follows:
• G100 supplies the right front lamps
• G101 supplies the left front lamps
• G400 supplies the right rear lamps
• G401 supplies the left rear lamps

As are the head lamps
When the headlamp switch is placed in the HEAD position, ground is applied to the headlamp switch headlamps ON signal circuit of the body control module (BCM). When either the headlamp switch is placed in the headlamps position or ALC is enabled, the BCM applies a ground to the headlamp low or high beam relay control circuit. This energizes the relay and applies battery positive voltage to the left and right low or high beam fuses in the underhood fuse block, then through the headlamp supply voltage circuits to the headlamps. Ground is applied at all times to the left headlamp from G101 and to the right headlamp from G100.

Your best bet mite be to take your vehicle to a qualified repair shop. Have the BCM checked for DTC- diagnostic trouble codes to start .

Apr 26, 2018 | Cars & Trucks

1 Answer

Is there a trick to getting to the rear turn signal on a 2003 ford focus hatchback. I had removed the screw to the lens cover but I still cannot gain access to the turn signal bulb to replace it.


Replacing tail/brake/backup lights and turn signal bulbs (coupe)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. From inside the luggage

compartment remove the wing nut

of the rear light assembly cover.

3. Using a Phillips screw driver

remove the screw. The lamp is still

retained by a spring loaded clip.

Remove by gently pulling out the

light housing.

4. Turn the bulb socket counterclockwise as far as possible and pull it

out.

5. Pull the bulb straight out of the socket.

Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (sedan)

1. Make sure the headlamp control

is in the OFF position and then

open the trunk.

2. From inside the luggage

compartment remove the three wing

nuts of the light housing.

3. Gently pull the light housing to

the outside.

4. Turn the bulb socket

counterclockwise and pull it out.

5. Pull the bulb straight out of the socket.
Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (wagon)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. Using a screw driver remove the

fixings and trim from the body.

3. Remove the socket from the lamp

assembly

4. Pull the bulb straight out of the

socket.
Install in reverse order.


Hope this helps.

Zeppelinx12

Mar 03, 2011 | 2003 Ford Focus

1 Answer

How to change a front turn light in a 1996 taurus.


Lamps, Parking Front Lamp-Lamp Assembly, Taurus
Removal and Installation
  1. Remove Headlamp (13008) as outlined.
Headlamp Assembly
Removal and Installation
  1. ani_caut.gif WARNING: THE REPLACEABLE HALOGEN HEADLAMP BULB CONTAINS GAS UNDER PRESSURE. THE HALOGEN HEADLAMP BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR THE HALOGEN HEADLAMP BULB IS DROPPED. HANDLE HALOGEN HEADLAMP BULB CAREFULLY. GRASP HALOGEN HEADLAMP BULB ONLY BY ITS PLASTIC BASE. AVOID TOUCHING GLASS ENVELOPE. KEEP HALOGEN HEADLAMP BULB OUT OF REACH OF CHILDREN.
    Position headlamp switch (11654) and headlamp time delay switch (13736) in the OFF position.
  1. Remove two bolts retaining headlamp (13008) to upper support assembly and loosen pinch bolt. Remove headlamp assembly from vehicle.
  1. Remove park lamp bulb and socket (Sable only) and headlamp bulb and socket from Headlamp Assembly as outlined.


    Headlamp Assembly (Taurus Shown, Sable Similar)


    k24744a.gif
  1. Turn lamp socket and wiring (13410) assembly 1/2 turn counterclockwise and remove from parking lamp (13200) housing.
  1. Remove screw from park/turn signal housing.
  1. Using 1/4 inch drive socket extension and swivel, insert tool through two access holes in upper radiator support. Remove screws from park/turn signal housing.
  1. Remove parking lamp from vehicle.
  1. To install, reverse Removal procedure.


    Front Lamp-Lamp Assembly, Taurus


    k23818a.gif

Nov 19, 2010 | Ford Taurus Cars & Trucks

1 Answer

How do i access front turn signal light bulb on 2001 camaro


  1. Open the hood.
  2. Remove the headlamp housing bracket bolt from the headlamp bracket.
  3. Pull the headlamp inboard to disengage the headlamp tabs from the headlamp bracket slots.
  4. Pull the headlamp forward to access electrical connectors.
  5. Disconnect the electrical connectors from the headlamp.
  6. Remove the headlamp from the vehicle.
Remove the park and turn signal lamp sockets from the lamp by rotating counterclockwise.

Mar 09, 2010 | 2001 Chevrolet Camaro

1 Answer

How to replace front turn signal housing


Front Turn Signal & Parking Lights
  1. On some models you will need to remove the headlight bezel mounting screws and the bezel.
  2. Remove the mounting screws for the lamp assembly.

af50756.gif
Remove the mounting screws securing the lamp assembly

  1. After the screws are removed, pull the assembly from the vehicle.

5deda5d.gif
After the screws are removed, pull the assembly from the vehicle

  1. Disconnect the twist lock socket from the lens housing.

90fe451.gif
Disconnect the twist lock socket from the lens housing

To remove the bulb, turn the twist lock socket (at the rear of the housing) counterclockwise 1/4 turn, then remove the socket with the bulb; replace the bulb if defective.


0568896.gif
Newer Oldsmobile models have the turn signal separate from the headlamp assembly ...


252443f.gif
... unlike the newer Buicks, where the unit is attached to the headlamp

To install:
  1. Install the electrical harness to the back of the unit.
  2. Position the signal assembly, then attach to the vehicle with the mounting screws. Tighten the screws to 54 inch lbs. (6 Nm).
  3. Insert the socket to the back of the unit, then attach the headlamp bezel if removed.

Feb 13, 2010 | 1992 Oldsmobile Cutlass Ciera

1 Answer

Change front turn signal light?


Front Turn Signal & Parking Lights
  1. On some models you will need to remove the headlight bezel mounting screws and the bezel.
  2. Remove the mounting screws for the lamp assembly.
c289083.gif
Remove the mounting screws securing the lamp assembly

8325b44.gif
After the screws are removed, pull the assembly from the vehicle

ad45385.gif
Disconnect the twist lock socket from the lens housing
To remove the bulb, turn the twist lock socket (at the rear of the housing) counterclockwise 1/4 turn, then remove the socket with the bulb; replace the bulb if defective.

19af8c1.gif

Newer Oldsmobile models have the turn signal separate from the headlamp assembly ...

d57d520.gif
... unlike the newer Buicks, where the unit is attached to the headlamp

To install:
  1. Install the electrical harness to the back of the unit.
  2. Position the signal assembly, then attach to the vehicle with the mounting screws. Tighten the screws to 54 inch lbs. (6 Nm).
  3. Insert the socket to the back of the unit, then attach the headlamp bezel if removed.

Oct 31, 2009 | 1990 Pontiac 6000

1 Answer

How do you replace headlamp bulbs on 1999 chrysler 300


You half to remove the Headlamp housing to change it. Here is the instructions out of the factory manual.
Tell me if this works for you?
HEADLAMP HOUSING - CONCORDE/LHS/330M Headlamp lens fogging is a normal condition and does not require service unless excessive or continual. Moisture will vent from tubes or vents located on the back of the lamp.
REMOVAL
  1. Release hood latch and open hood.
  2. Remove large rubber grommet (70 mm x 168 mm) from splash shield to gain access to fascia fasteners Access Rubber Grommet
  3. Remove fasteners attaching fascia to the front fender and splash shield, using access hole in splash shield Fastener Locations
  4. Remove the push pins attaching the fascia to the upper radiator closure panel Remove Push In Fasteners
  5. Remove jackscrews attaching headlamp housing to crossmember and remove the lamp housing to access the lamp(s) Headlamp Jackscrews
  6. Roll fascia forward to clear way for headlamp housing removal Roll Fascia Forward
  7. Disconnect wire connector from back of lamp socket(s) and/or bulbs.
  8. Remove headlamp housing Remove Headlamp Housing
INSTALLATION CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
  1. Place headlamp housing into position.
  2. Connect wire connector to lamp socket(s) and/or bulbs.
  3. Verify headlamp and signal lamp operation.
  4. Install jackscrews to attach headlamp housing to crossmember.
  5. Align fascia to bumper reinforcement and install the top center push pins, to upper radiator closure panel.
  6. Align the two fascia studs to the fender vertical attachments, at the same time align the fascia groove on the horizontal flange with the fender drive pin. Push fascia rearward to engage the fasteners.
  7. Install nut on fascia stud through the splash shield access hole.
  8. Verify headlamp operation and alignment

Mar 27, 2009 | 1999 Chrysler 300M

1 Answer

Replace brakelight in trunk of 300m


REMOVAL
NOTE: Some moisture accumulation inside a vented headlamp unit is normal. Moisture will vent from tubes or vents located on the back of the unit. This normal condition will appear as a fogging on the inside of the headlamp lens (similar to the fog that sometimes appears on the inside of the windshield). This moisture may be removed by activating the headlamps on high beam for 15 minutes.

If water droplets larger than 1 mm in size have accumulated on the inside of the headlamp lens, the headlamp unit should be replaced.


CONCORDE/300M
Release hood latch and open hood.
Disconnect and isolate the battery negative remote cable.
Remove the one bolt retaining the washer bottle filler neck and move aside.
Remove the two bolts retaining the speed control servo and move aside.
Remove fasteners to upper radiator crossmember:
Two jack screws on each side.
Three crossmember retaining bolts on each side.
Three push pin fasteners across top of grille.
Gently pry back grille and remove the two bolts to front crossmember. This will allow you to move the crossmember forward, pivoting at the radiator grille, to access the headlamp unit.
NOTE: Once the crossmember is loose, take care not to scratch the fenders.

Maneuver the headlamp unit to remove from behind fascia. Gentle prying of fascia may be needed to clear it enough to remove the headlamp unit.
Disconnect the lamp connectors and transfer lamps if replacing unit.
INTREPID
Release hood latch and open hood.
Disconnect and isolate the battery negative cable.
Remove jackscrews attaching headlamp to body (Headlamp Housing – Intrepid).
Remove headlamp from body.
Disconnect wire connector from headlamp and parking, side marker, and turn signal lamps.
Remove headlamp housing from vehicle

Mar 26, 2009 | 2002 Chrysler 300M

1 Answer

Cannot see how to replace the front turn signal on a 98 camery


Open the hood. Locate the phillips screw that holds a plastic tab, from the signal lamp housing, onto the metal support, near/above the outer edge of the headlamp. Remove the screw. The turn signal lamp assembly pulls straight out, towards you. It may be rather tight, if it has never been replaced before. The bulb is replaced by turning the socket that hooks onto the inside of the lamp assembly.

Nov 24, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...