I want to buy a 2008 Hyundai Tucson wheel (rim) for use as a spare. Where can I get one from?

The location of the number 1 cylinder in a 2008 Hyundai Tucson is determined by the engine type and layout.
Hyundai Tucson 2008 models comes with 2 different engine types :

• 2.0L I4 engine
• 2.7L V6 engine

In both engines, the firing order is 1-3-4-2, and the cylinder layout is inline or straight.
The cylinder layout of the 2008 Hyundai Tucson with 2.0L I4 engine is inline 4-cylinder, meaning that the cylinders are arranged in a line, one after the other. In this configuration, the number 1 cylinder is typically located at the front of the engine, on the driver's side.
The cylinder layout of the 2008 Hyundai Tucson with 2.7L V6 engine is V6 engine, meaning that the cylinders are arranged in a "V" shape. In this configuration, the number 1 cylinder is typically located at the front of the engine, on the driver's side, and it's the first cylinder on the left bank.

Hi,

Please check the heater motor and also the thermostat. If those don't work, then this can also lead to your ac/heating system to malfunction as well.

Please use autozone to get a free diagnostic run on your car to get a list of errors. Then, they can tell you which errors are relevant to your ac/heating issue.

Thank you.

Question edited for clarity and order, year make model cc and first in the question.
Question moved to model category.

Page 6

https://www.newtonnet.co.uk/coupe/GK-HMA-WorkshopManual/PDF/EM.pdf

More here

https://www.google.com/search?q=2008+Hyundai+Tucson+G4GC.+Torque+settings+main+bearings+and+big+end+bearings

..

Your best bet is to buy a service repair manual specific to your vehicle since you'll want to make other repairs when they arise. You can purchase hard copies in book form or download an electronic version. Such publishers for automotive repair manuals include Motors, Chilton, Haynes, etc.

can be a number of problems -have the check engine light scanned most auto stores offer this service for free the code will assist in solving your problem

Your friendly Hyundai parts person can let you see the factory replacement...find the nut you need and note it's size for replacement...I search many salvage yards for parts like this...

Check the fuse , if it is blown, the radio won't work. The fuse box diagram is in your owners manual. It will also tell you what size fuse the radio requires.

FACTORY SPARE TIRE IN TRUNK HAS LARGER RIM. THE RIM IS 2 INCH BIGGER IN DIAMETER TIRE HEIGHT AND RIM WILL GIVE CAR CORRECT WHEEL HEIGHT.IF YOU DONT HAVE FACTORY SPARE TIRE.YOU CAN BUY SAME SIZE RIM THAT YOU HAVE ON YOUR VAN AT SALVAGE YARD PUT USE TIRE ON RIM OR GO TO DEALERSHIP THEY CAN GET YOU A FACTORY SPARE TIRE.

That 2008 Hyundai came with a bumper to bumper warranty, run it past a dealer first. If it is not under warranty then go to ebay and buy a repair manual instead of asking someone else to get one and reprint it here for you. If you can buy a tank of gas you can buy a repair manual on CD.