Question about 2000 Ford Focus

1 Answer

How to fix heater on ford focus tried a new motor

How to fix heater on ford focus tried a new motor heater blower it still wont work

Posted by on

  • jandjdist
    jandjdist May 11, 2010

    your gonna need to leave more information in order for anyone to be able to help you.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Expert
  • 279 Answers

Check the wiring to the reostat (the resistor that controls the fan speed) also check the reostat has not burnt out. (the reostat should be near the heater motor housing)

please let me know if this helps
cheers
big mike :)

Posted on Jan 04, 2010

  • Peter Robinson May 01, 2013

    after changing the resistor pack because it was only working on the highest setting it now runs the heater on settings 2 3 &4 but the pack gets very hot

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A/C and Heater Problem


Well,you eliminated the resistor,so it probably means the blower motor has shorted out.Either that or something has gotten into the blower wheel and jammed it. If you can bypass the resistor and just put 12 volts into the motor,do it.But don't hold it long,as a direct short can cause a fire without a fuse to blow for safety.
In other words,prepare to buy a new heater blower motor. don-ohio

Nov 05, 2011 | 2000 Ford Focus

2 Answers

Hello my name is Sean and I have a 2002 ford focus wagon with a 2.0 motor. The blower fan for the heat and air has stoped working. I have ordered a new blower fan and resistor but havent received yet. I...


the fan motor is maybe bad, disconnect it (the motor) and put in new fuse, if its ok, then the motor is bad. the resistor only handles speeds lower than HIGH. so replace the motor first, then try it, if all speeds work, then the resistor is OK.

Sep 12, 2011 | 2002 Ford SVT Focus

1 Answer

Heater and air stopped working on my 2000 Ford Focus zx3


CHECK BLOWER MOTOR FUSE AND RELAY.SEE IF POWER GOING TO BLOWER MOTOR YOU HAVE FAULTY BLOWER MOTOR.IF BLOWER MOTOR FUSE AND RELAY OKAY.IF NO POWER GOING TO BLOWER MOTOR BUT POWER AT AC AND HEATER CONTROL SWITCH. BLOWER MOTOR HAS POOR GROUND OR AC AND HEATER CONTROL SWITCH IS BAD.

Jun 12, 2011 | 2000 Ford Focus

1 Answer

I have a 2000 Ford Focus and the heater fan has stopped working and so has the heater controls.


check the fuses first ,but i suspect a new blower motor is the order of the day and its a big job on the non AC models

Dec 21, 2010 | 2000 Ford Focus

1 Answer

Ford focus 2003 cl heater problem heator only works in position 4.how do i fix it


replace the blower resistor. Its up under the dash on passenger side, beside the blower motor.

Nov 15, 2010 | 2003 Ford Focus

1 Answer

Heater switch on my ford foucs only blows on setting 4, 123 wont work why is this.


Dear Madam or Sir,

the problem with your Focus is the blower motor´s pre-resistor. This is a low-priced spare part (app. $15) and can be serviced in no time.

The pre-resistor is mounted to the blower motor´s assembly, change should be done in less than 45 mins of time at the shop.

Jun 25, 2010 | 2002 Ford SVT Focus

1 Answer

A/C and Heater only works on 4


price and replace blower motor resistor

Jan 19, 2010 | 2000 Ford Focus

1 Answer

Heater not working, blower is fine. I heard it may be the thermostat sticking. Does this sound familiar?


If your blower is working it is likely the thermostat. Have your cooling system flushed and replaced with new coolant being careful to use the proper type.

If this doesnt work you may need either a new radiator or heater core. Sounds like the cheaper fix though and you wont waste your money. It's good for your engine life

Dec 31, 2009 | 2000 Ford Focus

1 Answer

Heater fan only works on fastest speed


Your blower motor resistor has gone bad, it should be located next to your blower motor in the car, held in place with a couple of screws, remove it and replace it. The resistor is responsible for making the blower motor run at slower speeds than high or (4). Let me know if this helps.

Jun 16, 2009 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

809 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22483 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...