Question about 2000 Lexus RX 300

1 Answer

Tail lights don't work. Fuse is goo and bulbs are

Tail lights don't work. Fuse is goo and bulbs are good.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 755 Answers

Check for voltage at the fuse and at the light bullb socket.

If you have juice at the fuse and none at the bulb look for a short.

You could have a broken ground wire too. So try grounding the bulb with a test light.

Good luck and be safe.

Posted on Dec 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No tail lights, dash lights, signal lights don't work everything else works


sometimes when one of your bulbs is out it does that to all off the start with your turn signal bulbs other wise its you regulater fuse located under the hood

Jan 26, 2013 | 2001 Chrysler PT Cruiser

1 Answer

Tail lights don't work on 83 cutlass supreme


I assume you checked the bulbs and they were good? It's possible that the sockets have gone bad and need replacing. The tail lights are fused through the instrument panel lights. that fuse should be in the middle of your fuse box, marked "instr". If the fuse is good check to see if the dash lights come on when you turn the headlight switch on. If they don't then change the headlight switch. hope this helps.

Mar 12, 2012 | 1983 Oldsmobile Cutlass Supreme

1 Answer

Tail lights do not work, blinkers work, brakes work, but tail lights do not. This happened when I hauled my boat home, so I disconnected the trailer light harrness and they still don't work, fuses are...


I bet you missed a fuse. Your tail lamps are protected by fuse #9 in the instrument panel fuse block. It is a 20 Amp fuse and is marked "PARK LPS".

Sep 02, 2011 | 1997 Chevrolet Suburban

1 Answer

Tail lights not working. fuses look good, brake lights work, hazards work, but running lights don't- gmc sierra 2500


do the front marker/park lights work if not you could have a bad light switch on the tail light side of the switch.you need to check the brown wire at the back of the truck in the wiring harness as this is the tail light wire that feeds the bulbs.if you have power there then you will have to check for power at the socket,if no power at the socket but were you check the wire then there is a problem between the two that you will have to check out.if there is no power when checking the wire then you will have to check for lose of power between the switch and rear wiring.make sure the fuse is good by using a test light and not by looking as sometimes they look good but don`t work.

Jul 11, 2011 | GMC Sierra 2500 Cars & Trucks

2 Answers

All the running lights work minus the rear tail lights but the brake lights work and the bulbs look good


I have a f-250 super duty,2001, dash& running lights don,t work, found a 15 amp fuse blown in engine compartment. fuse,s keep blowing. please help.

Jan 16, 2010 | 2003 Ford F250 Super Duty Crew Cab

2 Answers

Right brake light out; tail light works fine


most rear tail lights and turn/stop lights are the same dual filiment bulb. it is possible for your tail light to work and your brake light not to and still have a bad bulb. I would check the bulb first, your brake light works on the left yes? this would mean that the fuse is fine

Mar 31, 2009 | 2006 Dodge Stratus

1 Answer

Tail Light doesn't work after replacing bulbs


Hi

Sounds like you have blown a fuse.

Check through the fuses with a test light.

Good Luck !

John.

P.S. Don´t forget to give me a rating please !

Jan 21, 2009 | 2006 Scion xB

3 Answers

Tail light, backup light and dashboard light will not light up??


96 eclipse rs back tail lites and dash wont come on i changed the combination switch ,fuses,relays and bulbs and it still dont work what else can it be?

Dec 11, 2008 | 1997 Mitsubishi Eclipse

Not finding what you are looking for?
2000 Lexus RX 300 Logo

Related Topics:

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

Marvin
Marvin

Level 3 Expert

81342 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

918 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...