Question about 1995 Mitsubishi Diamante

1 Answer

Neutral light on magna th keeps flashing when in 1,2,3,and d, what should i be looking for?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 720 Answers

Hi there,

The Diamante has an intelligent auto transmission.

When the "N" light flashes on your instrument panel, it means the onboard computer has detected an abnormaility within the automatic transmission.

If I remember correctly, the frequency of the flashing "N" denotes two possibilities:

a) 1 flash per second = Transmission fault:

You will need to have the fault codes extracted from the vehicle's computer, to determine the area of your transmission which is at fault.

b) 2 flashes per second = overheated transmission

Pull over and allow the engine to idle for 2-3 mins, while in PARK (this will aid the transmission fluid to flow throughout and help to cool the trans fluid down a little). You will need to have the fluid inspected and possibly the fluid temp sensor also.


"If this has helped you in any way, please rate this solution"

Posted on Feb 16, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Mitsubishi magna 2001 model and I'm having computer problems the battery symbol keeps flashing and it keep stalling and won't idall properly

You need to have the Alternator tested, the battery symbol indicates the system voltage is low. The other problems are due to the low voltage.

Sep 18, 2012 | 2005 Mitsubishi Magna Wagon

1 Answer

Th magna wiring diagram

We do not have diagrams for this model. USA only, Sorry.

Aug 06, 2012 | 1999 Mitsubishi Galant

1 Answer

I want to take out the Traction Control from my Magna TH Sports

No you can't "take it out" the system is part of the ABS brake system.

Jun 01, 2012 | Cars & Trucks

2 Answers

TH Magna stalling in idle after battery replacement

Hi - what was the solution??

Ive just had exactly this problem. Got new battery today then no idle. The car starts fine and runs for abourt 1 second then instantly dies. Its fine if you keep your foot on the throttle. Unfortunately if you are going downhill as soon as you place your foot on the brake the engine dies and the steering fails - then the brakes!!!

I seem to remember having idle problems the last time I replaced the battery. but not as severe.

Any how I got home after nearly crashing with starting the engine 20 times. Then with the engine off I pressed the throttle right to the floor and released.- and then restarted. That seemed to work for some reason ??? The Idle is now 100% ok although still a bit rough. But at least does't stall.
I cant see why doing anything to the throttle pedal/cable should affect the idle to be killed.?? even if the cable snapped it should still idle.
NB about 10% of the starts the idle actually idled ok for a few minutes before failing again

Any thoughts greatfully received

I now darent go out!!


Misubishi service had no idea- said bring it in!!

Dec 08, 2009 | 1999 Mitsubishi Galant

1 Answer

I need a car anual for a magna

This sign ( ! ) means that your car Handbreak is pulled. This a sign for Handbreak

Aug 30, 2009 | 2003 Mitsubishi Lancer

1 Answer

My car keeps cutting out and has died a couple of times. now when i go to put it in drive it sometimes grinds or it will just sit there and the o/d off light flashes. i've changed the fuel filter.

transmission range sensor at Ford!! called safety neutral switch at auto parts stores and is the same thing... The check engine light finally came on on mine, after cutting out intermittently for a while; the code was P0708... Mine is a '98 Contour and from what I see is in a similar the left of the battery sitting on top of the transmission with a wire plugging into it. The generic "safety neutral switch" looks a little different in that it is not as much as a "diamond shape" as the original Ford part... but other than that the rest looks the same. I've read on other sites about the O/D light flashing with this problem, too, sometimes.

Aug 06, 2009 | 2000 Ford Contour

1 Answer

Mitsubishi TH Magna 4 door Disassembling the dash to replace blown light globes. Where are the screws or bolts?

if you dont see any(look real hard) then you probably can just pull up or out and it will just come out,Some dashes after 2000 are pushed in type.

Jul 23, 2009 | Mitsubishi Passenger Cars & Trucks

1 Answer

93 Magna Auto vibration at idle

Check your engine and transmission mounts .

Jun 26, 2009 | Mitsubishi Sigma Cars & Trucks

1 Answer

My magna wont slect Drive without flashing Neutral also

i bypassed my heater coil and gave my ecu a clean and now works as normal

Jun 11, 2009 | 1999 Mitsubishi Diamante

Not finding what you are looking for?
1995 Mitsubishi Diamante Logo

1,514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

83850 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides