Question about 2004 Dodge Intrepid

1 Answer

Signals not working

My signals are not working and the fuse is still good.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

If the signals simply come on and stay on (solid not flashing) you may need to replace the flasher module (located under the dash near the steering wheel a silver or clear plastic cylindrical object about 1" with 2"diameter) a common service part that runs from $5 to $15.

Posted on Dec 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 crown vic turn signals do not work. Started out no hazards or rurn signals. Checked fuses, all good. No flasher fuse. Replaced signal switch on column. Hazards now work, still no signals. Replaced...


make sure that all of your turn signal bulbs are not blown they run through each other so you know when one gets blown.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/robert_e9d0abd7cc2508b3

Jan 01, 2015 | Cars & Trucks

1 Answer

Turn signals wont work in my 2001 dodge startus


Turn signal flasher shot? Turn signal switch bad? Wire harness to turn signal switch (stalk) loose? are all TS bulbs good? Are you sure about fuses? Maybe a loose one, or one that looks good but is not?

Aug 18, 2012 | 2001 Dodge Stratus

1 Answer

Signals not working but hazard does work ..fuse r good


It's most likely your Signal light switch @ fault the hasards & the signals use the same relay & if you are correct about all the fuses being good the next likely issue is in the signal switch on the steering columb

Jan 15, 2011 | 1997 Honda Accord

1 Answer

Turn signals not working in a 1993 Jeep Grand Cherokee


fuses good? turn signals come on but won't blink? check blinker switch under dash at fuse panel, it will be a round push incylider next to fuse panel, with signals on put your finger on round cylinder, if you don't feel it click, it's bad.also if not that check for a blown bulb in turn signals. hope this helps!!

Nov 11, 2010 | Jeep Grand Cherokee Cars & Trucks

1 Answer

1998 taurus - turn signals were working - pushed the hazard lights button - hazards did not work and also now turn signals do not work


Check the fuse/relay panel for a blown fuse/relay. Also look at the turn signal flasher and the four way flasher located in fuse/relay panel for problem. If the fuses are good replace the flashers to correct the problem. Hope this will help you.

May 20, 2010 | Cars & Trucks

3 Answers

Turn signals dont work


that could easily be just the fuse or the flasher unit. both are on the driver side under the dash

Mar 10, 2010 | 1991 Ford Tempo 4 Door

3 Answers

Blower motor and turn signals stopped working


CHECK BLOWER MOTOR FUSE AND RELAY.IF ALL IS GOOD.CHECK TO SEE IF BLOWER IS GETTING POWER.IF NOT.SWITCH IS BAD.IF YES REPLACE BLOWER MOTOR.IF TURN SIGNALS STOP WORKING.CHECK FUSE FIRST.IF FUSE LOOK GOOD. CHECK BULBS TO SEE IF THEY ARE BLOWN.IF BULBS LOOK GOOD PROBLEM COULD BE WORN OR CORRODED BULB SOCKETS OR.BAD GROUND.OR THE TURN SIGNAL SWITCH IS BAD.

Aug 24, 2009 | Plymouth Voyager Cars & Trucks

2 Answers

No turn signals, no tail lights and fuses are good


Replace the non-working tail light bulb. Try replacing the bulbs for the turn signals. If that doesn't work, replace the relay.

May 24, 2009 | 1995 Isuzu Rodeo

1 Answer

1997 olds cutlass turn signals not working


If you haven't done so already, change both flashers that are mounted in the fuse box, the one for turn signals and the one for the 4 ways.
You might have a bad turn signal switch.

Mar 13, 2009 | 1997 Oldsmobile Cutlass

1 Answer

Turn signals


Could you please rqate this, thanks

Sep 17, 2008 | 1995 Ford F150 Styleside Regular Cab

Not finding what you are looking for?
2004 Dodge Intrepid Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

83527 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22393 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...