Question about Ford F-100

1 Answer

Adusting hydo tappets on 351 cleveland engine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 538 Answers

Unless you have changed the valve train in some way there is no adjustment. Just tighten the rocker arm bolts to 18 Ft.Lbs. Make sure the aluminum square piece fits down in the slot in the head. If try to start the engine right away, with used lifters, it probably won't start. The lifters have to bleed down to allow the valves to close all the way. Leave it sit for a half hour or so. With new lifters, it should start right up, assuming you have everything else right but, the lifters will clatter for a bit until the oil pressure is up.

Posted on Dec 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the engine capacity horse power for a 351 ford cleaverland .


351 "C" 4V 1970-1973 Cleveland
http://www.carmemories.com/ford-engine-specifications/351-engine-specs/351c.html
would have thought engine capacity would be what they wanted
351 cubic inches which converts to 5.75186 litre capacity
horse power in the link above is 300 BHP (brake horse power)

I have no idea myself but found the car memories web site that states the engine specifications and I hope it is correct and matches your engine ?
most likely it would be rounded up to a 5.8 litre capacity

Jul 07, 2017 | Ford Cars & Trucks

1 Answer

What is the engine capacity of a ford cleaver land 351 engine I need to know for the registration change of engine thanks james.


You mean a Ford 351 Cleveland? ..you need to know the oil capacity??... 5 quarts total.. (includes oil filter change)

Jul 03, 2017 | Ford Cars & Trucks

1 Answer

351 windsor


You can tell by looks or by the VIN number if the engine is original.
The fifth digit could be H or Q. H is for the Windsor engine and Q is for Cleveland. The Windsor looks like an ordinary 289 or 302 engine, the Cleveland is a big head 400 version. I don't think they used a 4bbl Windsor but they did use a 2bbl Cleveland so that is not a good example.

Jan 19, 2014 | Cars & Trucks

2 Answers

The left front exhaust valve hydraulic lifter on my 302 cleveland has taken the bottom off it and i want to know where it could end up


First of all Ford never made a 302 cleveland, they made 351 cleveland . the metal from the lifter is all thru the engine ? ( bearings, oil pan, etc. )

Apr 21, 2011 | Ford Futura Cars & Trucks

1 Answer

Need firing order diagram for 371 cleveland engine


FIRING ORDER FOR 351 CLEVELAND IS 1 3 7 2 6 5 4 8

Jul 07, 2010 | 1981 Ford F 100

1 Answer

Firing order for a 74 351 block casting d4ae-6015-aa


This all depends on whether this is a Windsor engine or a Cleveland engine. The Windsor engine has a 1-3-7-2-6-5-4-8 firing order. The Cleveland engine has a 1-5-4-2-6-3-7-8 firing order. You may want to try the Cleveland engine firing order first.

I hope this helps! :) That's a NICE old engine you have there!

May 24, 2010 | 1985 Ford F150

1 Answer

I have a 1965 food falcon with a mustang 302 (1978 ) v8. how do i know if it is a windsor or not?


Well there is a 302 cleveland, they are mainly an Australian engine. Identifying one is much like telling the difference between a 351 windsor and a 351 cleveland. Based on the fact that it's from Ford's 335 engine family. 8 cap screws to hold on the valve covers, the block is longer do to the timing chain housing being integrated. The fuel pump bolts are mounted vertically, and the exhaust bolt holes are diagonal. Also, a big difference between an american 302 and an aussie 302 cleveland, is the connecting rods for the cleveland are 6.000''. Where the american 302 connecting rod length is 5.090". Also, referring to a 302 as a windsor is incorrect, it's block families name is the 90 degree v8. The only engine in that family that is properly named the windsor, is the 351 windsor. The 90 degree family also includes the 302 boss. The boss has cleveland style heads, and the block has screw in freeze plugs.

Nov 27, 2009 | 2005 Ford Futura

1 Answer

What is the timing on my 1970 cougar with a 351 4bbl


6 degrees before top dead center on 351 Cleveland engines.
10 degrees before, on Windsor engine.

Aug 08, 2009 | Mercury Cougar Cars & Trucks

2 Answers

I have a 1971 351 cid motor but dont know what automatic transmission do i have


Check this link and scroll down to I.D. Via pan gasket shape.

http://www.bulkpart.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=2&Category_Code=Ford

Jun 29, 2009 | 1999 Dodge Caravan

2 Answers

Engine wiring Diagram for a 351 cleveland


have you gotten an answer for the wiring on your 82 ford bronco w a 351C? i have the same problem putting a 351C into my 81 ford bronco

Mar 13, 2009 | 1981 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...