Question about 2001 Jeep Grand Cherokee
I found a solution on another site showing if i turn the ignition on and hold the reset button on behind the alarm light untill it turns to solid blue light then turn off the ignition , it will disable the alarm.
Posted on Dec 13, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 22, 2015 | Cars & Trucks
Feb 27, 2015 | 2011 Jeep Grand Cherokee Laredo
Aug 03, 2014 | 2001 Jeep Grand Cherokee
Unlock all of the Jeep Grand Cherokee's doors and open the driver's side door. Keeping the door open, lock it using the manual lock on the door itself.
Put the manual key into the ignition and switch it to the "On" or "Run" position, whichever applicable, without starting the engine.
Point the remote at the receiver (located by the little bulb on the car ceiling) and hold down the "Lock" button for up to 5 seconds.
When the driver's side door unlocks, you know the remote has been programmed correctly. If you are only programming one remote, jump to the next step. If not, manually re-lock the driver's side door and repeat steps 5 and 6 using each remote you would like to program and then continue.
Turn the key to the "Off" position and turn the ignition on immediately. This must be done within 20 seconds of programming the last remote. You're finished!
Feb 11, 2013 | 1996 Jeep Grand Cherokee
Mar 11, 2011 | 1996 Jeep Grand Cherokee
Nov 25, 2010 | 1997 Jeep Grand Cherokee
Nov 11, 2009 | 1999 Jeep Grand Cherokee
May 14, 2008 | 1995 Jeep Grand Cherokee
1,173 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: