Question about 1997 Buick LeSabre

1 Answer

Bulb replacement,license plate ,1997 buick,park ave

Posted by on

  • 1 more comment 
  • chiefandy78 Dec 12, 2009

    license plate lite is in the trunk lid; not the body of the car.
    I need to replace the light bulbs
    1997 buick park ave ultra supercharge

  • chiefandy78 Dec 12, 2009

    no,I did not understand. now I see the two on bith sides. I did not know that the

    carpet cover needed to come off before the rest of the #10 mm nuts could be seen. now I understand how the whole light assembly comes off so that you can get at the bulbs. still working on it; but this looks like a good fix and response on your part. it all makes sense now. will rate after I get it done. thanks

  • chiefandy78 Dec 12, 2009

    mission accomptished. blubs replaced.
    trunk lid; than how to; I would have understood
    quicker. also, that I needed to remove the
    carpet cover on the trunklid to see the rest
    of the #10mm nuts to remove. Bottom line;
    correct directions. lights now work!!

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Buick Master
  • 79,865 Answers
  • yadayada
    yadayada Dec 12, 2009

    i DON'T THINK U UNDERSTAND YOU MUST PULL THE ENTIRE LIGHT ASSMEBLY OUT TO GET AT THE BULBS, THOUGHT THAT WAS CLEAR.

  • yadayada
    yadayada Dec 12, 2009

    When i give a solution I assume you have some auto repair kinowledge, this includes obvious things like the carpet be pulled back, sorry will be exact in the future, doing this on line expert thing is fairly new,I am retired from 30 years as a GM and Ford dealer tech, was always very good at fixing cars even at age 13.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

License plate light in my 1996, 3.8, Buick regal is not working. Which fuse is the one that should be checked?


the license plate light is part of parking lights it is power by parking lights.does your parking lights works if yes look for bulbs or wiring in trunk.

hope it helps

Mar 16, 2014 | Buick Regal Cars & Trucks

1 Answer

Timing chain replacement 1997 buick park ave.


They are not prone to fail. I always recommend to replace only major when engine repair is needed.

Mar 27, 2013 | 1997 Buick Park Avenue

1 Answer

How do I replace license plate bulbs on 2004 park avenue


I was wondering if this was a trick question.

If you don't see little screws holding the light cover on, you will have to access them from inside the trunk.

remove/replace.

Feb 02, 2013 | 2004 Buick Park Avenue

1 Answer

2002 Park Ave replace license plate lamp - How get to bulbs?


Open the trunk and you have to get to it from there. Good Luck

Jan 07, 2011 | 2002 Buick Park Avenue

1 Answer

How do you change a light bulb above the license plate in a 1989 buick park avenue


How do you change a light bulb above the license Problem with the 1989 Buick Park Avenue

Oct 08, 2010 | 1989 Buick Park Avenue

1 Answer

Do 1991 buick park aves have license plate lights


Yes they do, some are above the plates and they take the peanut bulbs aka 194's

Mar 15, 2010 | 1991 Buick Park Avenue

1 Answer

Power door lock switch replacement





Remove or Disconnect

Door handle trim plate.
  1. .Install or Connect

  2. Electrical connector and door lock cable.
  3. Trim panel by engaging hooks on backside of panel.
  4. Push pin fastener in defroster duct.
  5. Screw from behind lamp assembly.
  6. Courtesy lamp assembly.
  7. Two screws in arm rest.
  8. Arm rest cover plate.
  9. Door handle trim plate.
There May Be A Need to Drill Out RIVETS that Hold Motor in place,. Just Replace with>>MACHINED SCREWS & BOLT'S




Remove or Disconnect

  1. Trim panel. See: Doors, Hood and Trunk\Doors
  2. Four tabs retaining switch.
  3. Electrical connector.
Install or Connect

  1. Electrical connector.
  2. Snap switch into trim panel.
  3. Trim panel.

Mar 14, 2009 | 2000 Buick Park Avenue

1 Answer

Replacing Bulb for License Plate on 2001 Buick Park Avenue


Have you tried to see if there is access underneath to that bulb ?

Jan 17, 2009 | 2001 Buick Park Avenue

1 Answer

Lic.Plate Bulb Change


look in your trunk there should be a cover on the back of your tail lights in the trunk. Look under it

Nov 24, 2008 | 1999 Buick Park Avenue

Not finding what you are looking for?
1997 Buick LeSabre Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...