Question about 1992 Ford Mustang

2 Answers

My turn signals dont work but the emergency flashers work fine.i checked the bulbs they are good .help

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

92 model has two flashers. 1 for the emergency lights and 1 for the turn signals. The emergency flasher is located in the fusebox under the steering wheel, and the other is located above the stereo to the right, behind the dash. If you remove the glove compartment door you can see it to your right. The one in my car was plastic, Hope this helps.

Posted on Mar 15, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 431 Answers

They are a serpent system different flashers and fuses and some times element of bulb

Posted on Mar 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987. Why is there no power at the turn signal cam?


Do you have brake and parkng lights? The turnsignal switch on the column is just designed to relay a path to the flasher and then it is designed to interupt the brake and some of the parking lights lights, which cause the flashing on and off. Double check fuses double check bulb socks and bulbs for good contacts. Does the 4 ways work? If the lights all flash then locate the turn signal flasher and switch with emergency flasher if possible to rule out relay. If those are all good and the emergency flasher lights work and bulbs, then you would have a problem with the turn signal switch. Hope this all helps

Feb 22, 2016 | Ford E-150 Cars & Trucks

2 Answers

Turn signal will eluminate but not flash. emergancy lights work and flash fine. Have replaced the flasher and turn signal switch.


You know you have 2 flashers right, one for emergency flashers and one for signal lights? Does it refuse to flash on both sides, right and left? Have you checked all bulbs front and back are good?

Jan 27, 2013 | 1993 Plymouth Sundance

1 Answer

Turn signals wont work bulbs ok dont have a manual to the car dont know wich fuse goes to the turn signals


pickup a test light and check all the fuse if the fuses are good then you probably have a bad signal flasher.make sure you change the signal flasher and not the emergency flasher as they look the same.

Jul 30, 2011 | 1995 Ford Mustang

1 Answer

I drive a 2000 mitsu. mirage. my turn signals just stopped working. i checked the bulbs the fuses they're good. the emergency flashers work im wondering if maybe its the turning module but i dont know...


The emergency flasher switch is also the turn signal flasher It pops out of the dash and can be replaced easy. do chaeck the fuses before going to this much troble. check all the fuses as some work backup circuits that you wouldn;t think would be important. Before replacing the flasher switch ( you may only be able to buy it from the dealer) work the switch several times and the flashers will come on cheak to see if allthe lights work thenturn the flashers off and see ( with the key on if the turn signals now work. Now if during the test with the four way flashers you see a bulb or more out you know that the turn signals wouldn't work, but the four ways will. they work on different fuses so chak the turnsignal fuse too. after cycling the switch try the turn signals again as the switch is likly to stick and sometimes cycling it will get the turn signals working again. Fooling around with the switch you may find a position that the turn signals work. if you can't get it to stay working then you'll have to change the flasher emergency switch.

Sep 30, 2010 | Mitsubishi Mirage Cars & Trucks

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

2 Answers

Turn signals dont work bulbs/fuses are good.


check to see if the emergency flashers work if they do its its either a wiring problem, bulb, or socket the bulb fits in. if it does not work than the flasher is the problem. it is located underdash on driver side in the kick panel( to left of the brake pedal) it is a blue or grey sguare relay looking plug. if it is factory flasher it will say flasher with the part # on it. it should also say toyota on it. good luck

Jul 09, 2009 | 2000 Toyota Camry

3 Answers

Flasher or turn signal switch


When you select left or right do any of the bulbs come on? If you select left check front and back left side if one of the bulbs did not come on the flasher will not work. Change the bulb that is out. Same with the right. If the fuse for the turn signal is good (check fuse or replace do not use visual, some appear to be good but are not).
The emergency flasher is different from the turn signal flasher. Look at manual for location of turn signal flasher. If you manually lift and lower turn signal control you may hear a clicking under the dash to locate the flasher.

Jan 02, 2009 | 1995 Chevrolet Caprice Classic

3 Answers

Blinkers not working


Did you check the bulbs? If one bulb is burned out, the blinkers won't word on that side. You could have one bulb burned out on each side. Start the car, put left signal on. Check front and back lights. Is one light on but not blinking? If that's the case, the light that's not on at all is burned out and has broken the circuit so the good light stays on and won't blink. Check the other side. You also have a 'flasher' , actually 2. One for emergency flashers, one for the turn signals. It could be that the turn signal flasher is shot. You just have to unplug it to remove. It's probably located near the fuses. good luck countrycurt0

Aug 10, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1992 Ford Mustang Logo

477 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

83810 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...