Question about Mercedes-Benz Mercedes Bentz Actros Semi Tractor

4 Answers

Where is located brake light switch on actros 1840?

Posted by on

  • Usman Ahmed
    Usman Ahmed Oct 25, 2016

    I think actros 1840 model han no separate brake switch it came with your brake actuator or simply within brake master cylinder wires....

×

Ad

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Mercedes-Benz Master
  • 1,149 Answers

Hi:
Most brake light switches are mounted to the upper area of the brake pedal arm, and are held in place with a pin or clip.

Posted on Dec 12, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I wan know where is stop brake sensor mercedes actros

Posted on Jan 30, 2018

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

F i am not wrong actros 1840 had no seperate brake switch it comes with brake actuator or simply you can say brake master cylinder....

Posted on Oct 25, 2016

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

??? ?????? ????? ?? ???? ?????? ?????

Posted on Nov 20, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring diagram for high beam on actros 3848


back for high beam forward for low beam
high beam will not work in low beam position

Dec 22, 2016 | Mercedes-Benz Mercedes Bentz Actros Semi...

1 Answer

On Mercedes Actros 1841 (2008 year of manufacturing) parking brake light blinking (on and off) even parking brake is not applied and truck is driven. What will be problem and solution?


check for loose connections or wire grounding out near the park brake switch
as it should be air controlled spring brakes for the park brakes check for a problem air switch in the park brake air lines

Oct 21, 2016 | Mercedes-Benz Cars & Trucks

1 Answer

Actros 3340 brakelights are not working


Ck fuse. If good, replace switch on brake pedal.

Jan 02, 2016 | Cars & Trucks

1 Answer

Eab fault on actros braking characteristics may have changed - Mercedes Bentz Actros Semi Tractor Problem


Abs sensors on brakes. Clean abs ring and sensors and make sure they are fully inserted. Almost against rings.

Jun 20, 2013 | Cars & Trucks

1 Answer

How to Ajust speed limit for atros 1840 ?


u can only set the speed limit with a star service tool. in fr drive contrle module u can set the speed limit under parameters

Nov 16, 2010 | Mercedes-Benz Mercedes Bentz Actros Semi...

1 Answer

SOFT WEAR GF MERCEDES ACTROS 1840


do you mean software??? anything after 2005 is encrypted and only the factory has it ,dealers do not have it because they have to connect too the internet to access it direct from the factory.Stops people like me and you from repairing the cars

Apr 08, 2010 | 2002 Mercedes-Benz S-Class

3 Answers

My brake lights are not working i checked the bulb and the fuse neither is out


check the brake light switch located under the dash,located above the pivot point on the brake pedal arm

Nov 11, 2009 | 2002 Honda Accord

1 Answer

I HAVE A 2002 S430, CHANGED BOTH FRONT WHEEL BEARINGS AND THE ABS LIGHT CAME UP, IF IT IS OFF THE CAR GOES TO LIMP MODE, WHEN I DISCONNECT ABS ST THE ABS PUMP THE CAR WORKS OK BUT THE LIGHT REMAINS ON....


ABS--BAS

Most likely cause is the 'stop lamp switch'
It is a electric switch located on the brake pedal inside the car, about half way up on the brake pedal.
Pretty cheap too, I think the switch is only like $25 bucks.
2 connectors on the switch and then it turns out.
hope that helps

Jun 07, 2009 | Mercedes-Benz Mercedes Bentz Actros Semi...

2 Answers

94 corolla brake light switch location?


The brake light switch is on your brake pedal.You may have more then one switch on the pedal.

May 15, 2009 | 1994 Toyota Corolla

Not finding what you are looking for?
Mercedes-Benz Mercedes Bentz Actros Semi Tractor Logo

Related Topics:

1,142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...