Question about Cars & Trucks

1 Answer

I have a RadioShack Pro-39 200 channel some keys don't work

I have a RadioShack Pro-39 200 channel programmable scanner.When I try to program it I have some key#'s that don't function and some that do. I also need a user manual can you help me??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

I couldn't locate a manual per se, but this link will take you all the parts of one:

http://support.radioshack.com/support_electronics/8992.htm

Regarding the keys not working, it's probably due to a "grunge" buildup that's happened over the years. Once the water, soda, dust, and food particles are gone the keyboard should work fine. Open the scanner case and you'll find a rubber/latex pad that sits below the front panel. Remove it and wipe both sides clean with a damp cloth (soap and water are ok if the buildup is really nasty. Wipe the face of the circuit board below the pad to remove any buildup. Dry everything thoroughly then put it back together.

Posted on Dec 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Programing anew key


BMW Multi Tool is known as one of the best car key programmers for BMW vehicles ever since OBDII tools were available in last century.
It has multi-function: key programmer, odometer correction, eeprom read and write, Synchronization Codes, and so on.
BMW Multi Tool includes forth parts, hardware device, dongle, programmer, software. Before running software you must connect dongle and hardware device to computer.
Newest version is V7.0 BMW Multi Tool V7 0 for CAS1 3 and EWS Powerful Than AK300

May 09, 2014 | 2001 BMW 325

1 Answer

Key


you will have to take your key to the dealer or locksmith there is a key code scanner that will scan your key and then program the new key the programmer is 268.00 dollars on amazon. i know im going through the same thing with my key but i can cut the chip out of mine and place in the new key

Jun 03, 2013 | 1990 Geo Tracker

1 Answer

I have a 2006 suzuki forenza. I had to replace the ignition key cylinder because my key got broken in the old one and did not come out. I installed the key cylinder. How do i program it the car will not...


Most newer cars have programmable keys. This means the key has to be programmed to the car computer. Call the dealership to see if your car requires a programmable key. If it does you have two options: 1) tow you car to the dealership and have it programmed 2) find a locksmith who has the programming equipment capable of programming your new key. Please note that usually when you buy a new ignition cylinder that they come with a mechanical key which is just a metal key that does not have the computer chip in it and can not be programmed. You would then have to buy a new programmable key and have the key cut and programmed to work in the lock cylinder.

Sep 20, 2012 | Cars & Trucks

3 Answers

I locked my keys in my car


Most cars can be opened using a long steel wire. Watch video for details

Sep 01, 2011 | Chevrolet Malibu Cars & Trucks

1 Answer

Lost the key, tried spare that realized only unlocked the doors in the ignition and the theft light started blinking. Is still blinking and now have original key but key wont turn in ignitionr


you can use the sbb key to copy a new one, Before running SBB key programmer, please insert the blank new key into your car keyhole;turn on ignition switch;Insert SBB 16-pin interface into your car OBD2 diagnostic seat. SBB key programmer copies chip according to car model, and it program key not clone key, it only needs to insert SBB. It is easy to do, you can DIY, if you don't know about the knowledge of the car repair, you need call for help of locksmith....

Sep 01, 2011 | 1998 Ford Explorer

1 Answer

How do I program a Key Fob on a 2005 Mk6 Fiesta


you can use the sbb key programmer to program it. Before running SBB key programmer, please insert the blank new key into your car keyhole;turn on ignition switch; Insert SBB 16-pin interface into your car OBD2 diagnostic seat. Following the step, works done..

Aug 31, 2011 | Ford Fiesta Cars & Trucks

1 Answer

I locked my vehicle (2008 Dodge Grand Caravan), with the remote keyless entry fob. The keyless entry will not unlock the doors, even after I replaced the battery. Unfortunately the emergency key that is...


It sounds like your FOB needs to be reprogrammed, email me at bigt_wlm@juno.com around thursday and I will try to email you the programming instructions for that, If I am not able to you will need to call a locksmith with a T-Code or MVP Pro key programmer or DODge to programm your remote to your ECU

Oct 31, 2010 | Dodge Grand Caravan Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14548 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...