Question about 2000 Mitsubishi Eclipse GT

2 Answers

I have a Mitsubishi Eclipse 2000 Gt. I recently been having problems with the right headlight. I thought it it went out. So i went to auto zone and bought a new bulb. But it still won't turn on. So i tried messing with it.I turn on the bright and the light works. But it only works if i have the brights on... I do not want to be driving my car with brights on. Can you help me with my issue? thanks!

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I also had this issue but found the have the low beam on the right side wired to its own fuse in the fuse box under the hood will be a rectangle yellow or white fuse spot in the fuse box under the hood with 2 small 10 amp fuses [Red] check both of those fuses

Posted on Apr 05, 2015

  • Mark Bell
    Mark Bell Apr 05, 2015

    i also had this issue but found the have the low beam on the right side wired to its own fuse in the fuse box under the hood will be a rectangle yellow or white fuse spot in the fuse box under the hood with 2 small 10 amp fuses [Red] check both of those fuses

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

Did you check the socket that bulb plugs into.I hav seen where they melt for, the hat produced by the bulb.If that isnt the issue,I would suspect the headlight switch.But first stick to basics.Check all the fuses.

Posted on Dec 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where isa the crank shaft position sensor located on a 2000 V6 Eclipse?


0996b43f8020334f.jpgAuston, I couldn't load both at the same time go to auto zone sign is (it free) and look it up

Sep 10, 2014 | 2000 Mitsubishi Eclipse

1 Answer

My 2000 eclipse gt is getting horrible gas mileage, took it to o'reillys to hook up a code reader and we got a p1400 code. he explained to me what it is. but no idea where it is on the car or how it could...


Type: 2000 Mitsubishi OBD P1400

There is a lot for you to read

Then have a repair shop properly test the vehicle
& make the repairs

The free code read at the parts store is a waste of your time

If you want buy a cheap code reader at auto zone, but understand why you have it & study OBD2 Systems & it will only read Generic Codes & a few others,always need professional software to look at data,road test with it & more

Codes usually have nothing to do with the need to install parts

You can have codes stored,lots of them & no check light on
your dash,you can have problems & no codes, but need the scan tool & other reference material & test euipment

Mar 10, 2014 | 2000 Mitsubishi Eclipse

1 Answer

Hi, I need help, the check engine light came on, It recently had service done, what can it be, the car is in perfect condition and well care. Eclipse GT 2006. Thanks


have someone to hook up a diagnostic code tester , to see if the computer has picked up any problems in the system, you can have this procedure done free at auto zone.

May 11, 2011 | 2006 Mitsubishi Eclipse

1 Answer

01 eclipse gt auto transmission went bad,put in 04 eclipse auto and had solenoids and nuetral safety switch changed,shifts from first to second then locks in limp 3rd with 4 solenoid codes coming up on...


did you change the powertrain control module with the trans?? if not thats probably where the problem lies, ive saw many people get mad and agervated just to realize they had to change the computer for trans with it..... just a thought.

Nov 29, 2010 | 2001 Mitsubishi Eclipse

1 Answer

2000 Mitsubishi Eclipse GT horn not working


check the wires to the clip on the horn they rust and then there no connection

Jul 20, 2009 | 2000 Mitsubishi Eclipse

1 Answer

How to change the spark plugs on a 2000 mitsubishi eclipse gt


front ones are simple you just pull the rubber boot off of it and screw it out. The ones on the back are a pain. you have to take the intake off to get to them. I would recommend a repair manual from an auto parts store.

Jun 09, 2009 | 2000 Mitsubishi Eclipse

1 Answer

Mitsubishi headlights


The next thing to check is the headlight switch, use a 12 volt test light and check for power to the headlights at the switch when it is turned on.

Oct 05, 2008 | 2000 Mitsubishi Eclipse

Not finding what you are looking for?
2000 Mitsubishi Eclipse GT Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

83481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22393 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...