Question about Nissan Sentra

1 Answer

Roaring noise in tires i have bought new tires and had a alignment

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,335 Answers

Either the alignment was not done correctly or the tread pattern on your new tires are causing the roaring sound. Take the car back to the service center that performed the alignment and ask them about the noise.
I suspect the tire pattern to be the culprit. Maybe you can take the tires back and choose a quieter tire pattern.

Posted on Dec 11, 2009

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 57 Answers

SOURCE: roaring noise front end

it sounds like a bad hub bearing

try raising the front end off of the ground and spin the tires by hand and feel for roughness in the hubs

Posted on Jun 16, 2009

  • 22 Answers

SOURCE: I HAVE A 2004 TOYOTA CAMRY. I HEAR A ROARING NOISE

sounds to me like its a cv joint. if the rubber boot gets damaged in any way, dirt gets in there and really does some damage. check the boot really good. if you dont see any holes or anything it might just be the wheel bearing. id take it to a mechanic and ask him to just look at it. usually they wont charge ya.

Posted on Apr 19, 2009

  • 3600 Answers

SOURCE: Roaring while driving

have you checked the fan clutch assembly?

Posted on Jun 22, 2009

  • 201 Answers

SOURCE: Excessive tire wear, 29000 miles. Tires are cuping

I am not sure I can help you much, I have bought, sold, used and abused tires all my life so I will try to help... First if you bought big aggressive tires that look cool, don't expect them not to make noise. Second, if you have ever run them underinflated and the cupping and adverse wear has started the only thing that may help reduce but not eliminate noise it is tire rotation.... Third aggressive tread is always noisy... And gets noisier with age. You have already aligned the truck, that is a step in the right direction. Keep tires properly inflated and rotate them often to square tread back up. Once cupping is minimised noise should go down. Just so you know I have learned about tire through a lot of personal experience. Don't by an aggressive tread if 98% of the time you or on the highway for the once or twice you may go off road... It's not worth it...

Posted on Oct 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why am I hearing a roaring sound in my 2007 Lexus 350?


I am thinking that the noise is from a failed wheel bearing or possible cv joint failure
find yourself another service dealer as tire noise is either there or not there and rotation (if it is a faulty tyie ) would move to the new position
Here is a clue to consider
rotating tires is a ploy by the tire dealers to sell tires
have a wheel alignment done on the rear first and then the front and leave the tires alone
if it is a front wheel drive vehicle you will get 3 times the mileage out of the rear tires compared to the front drive tires and that is a big saving for you
next point -- radial tires continue to wear in the same pattern regardless of where they are put so how are you to know it it is a faulty tire construction or a need for a wheel alignment
third point --- many brands of tires are made as directional tires ( a directional arrow on the side wall) and cannot be rotated because they cannot be fitted on a wheel that rotates against the arrow
if they are the wear in pattern of the belts in the rubber is altered and may lead to tire failure ---the tread pattern is designed to remove maximum water and produce maximum grip in the direction of the arrow

Sep 26, 2015 | 2007 Lexus RX 350 FWD

1 Answer

Bought used, 140,000 miles, roaring noise, brake light


3 suggestions for you, you may need to check the tire pressure, get a tire alligment done, or you have a bad wheel bearing, usally a bad wheel bearing make's a loud roaring sound going down the road. I hope I have helped you.

Jan 26, 2010 | 2001 Ford Windstar

1 Answer

Excessive tire wear, 29000 miles. Tires are cuping out and roaring. Tire dealer (Goodyear) said it was alignment. The truck always drove perfect.but I had it aligned anyway and noise is unbearable! 2008...


I am not sure I can help you much, I have bought, sold, used and abused tires all my life so I will try to help... First if you bought big aggressive tires that look cool, don't expect them not to make noise. Second, if you have ever run them underinflated and the cupping and adverse wear has started the only thing that may help reduce but not eliminate noise it is tire rotation.... Third aggressive tread is always noisy... And gets noisier with age. You have already aligned the truck, that is a step in the right direction. Keep tires properly inflated and rotate them often to square tread back up. Once cupping is minimised noise should go down. Just so you know I have learned about tire through a lot of personal experience. Don't by an aggressive tread if 98% of the time you or on the highway for the once or twice you may go off road... It's not worth it...

Oct 09, 2009 | 2008 Nissan Titan

1 Answer

Roaring while driving


have you checked the fan clutch assembly?

Jun 22, 2009 | 1998 Pontiac Grand Prix

1 Answer

Roaring noise front end


it sounds like a bad hub bearing

try raising the front end off of the ground and spin the tires by hand and feel for roughness in the hubs

Jun 16, 2009 | Honda del Sol Cars & Trucks

1 Answer

I HAVE A 2004 TOYOTA CAMRY. I HEAR A ROARING NOISE COMING FROM LEFT FRONT BY THE TIRE. I CAN HEAR IT WHILE IN THE CAR. THE FASTER I GO THE LOUDER IT GETS. IT MAKES THIS NOISE WHILE GOING STRAIGHT AND GETS...


sounds to me like its a cv joint. if the rubber boot gets damaged in any way, dirt gets in there and really does some damage. check the boot really good. if you dont see any holes or anything it might just be the wheel bearing. id take it to a mechanic and ask him to just look at it. usually they wont charge ya.

Apr 19, 2009 | 2004 Toyota Camry

1 Answer

Growling/Roaring Noise Front End


sounds like a wheel bearing. typically when you take weight off bad bearing noise goes away. to replace bearing you will need a press to get it off and on

Apr 06, 2009 | 2003 Hyundai Tiburon

1 Answer

AC/Heat Fan runs continuously and Rear end roaring noise


Sounds like the wheel bearing on the right rear hub may be defective, that would cause the noise if the tires are ok. As far as the fan goes not sure this isn't working as designed.

May 02, 2017 | 2005 Nissan Altima

2 Answers

2002 Jeep Grand Cherokee 4.0L Noise in front end while driving?


if it is a roaring noise it is probably a wheel bearing going bad

Jan 22, 2009 | 2002 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

82149 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...