Question about 1995 Buick Regal
Undo the two 8 mm bolts that retain the cables to the battery.
Remove the negative terminal first using caution not to contact the positive terminal with your wrench.
At the base of the battery there is a bolt with a 13 mm head. You need to loosen that bolt to allow the battery hold down to slide over enough to release the battery.
Some models have a brace rod that needs to be removed or loosened to allow enough room to pull it out.
Reverse procedure to reinstall.
Posted on Dec 11, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: transmission plugs different
Not if one is a 4t60e and the other is a 4t65e, they are not interchangable. The 1995 should be a 4t60e, It has a round plug toward the radiator and also has a vac modulator. The 2000 should be a 4t65e, It has a bigger round plug coming through the top of the side cover, toward drivers fender, and no vac modulator.
Posted on Mar 07, 2009
i had auto zone check the computer and was told i needed two sensor and i like know where they are located and if i can installed them my self thank you beepa1
Posted on Sep 23, 2008
Does it do anything? Ask for a code maybe? check your fuses? Hope one of these helps you! Merry Christmas
Posted on Dec 25, 2008
Maybe an ignition switch. Check to see if battery is getting to the starter solenoid when the key is turned to try to start. Sounds like the starter is ok.
Posted on Mar 08, 2010
Tips for a great answer:
Aug 02, 2010 | 1995 Buick Regal
May 16, 2010 | 1995 Buick Regal
May 07, 2010 | 1995 Buick Regal
Mar 06, 2010 | 1995 Buick Regal
Jan 31, 2010 | 1995 Buick Regal
Dec 31, 2009 | 1995 Buick Regal
Jun 21, 2009 | 1995 Buick Regal
Jan 24, 2009 | 1995 Buick Regal
Jul 12, 2008 | 1995 Buick Regal
346 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: