Question about 1997 Chevrolet Blazer

2 Answers

I have a 1997 chevy blazer s-10 that has a blower problem,it will not turn on at times and the door locks will not function and the ABS light will light up at the same time.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 4 Answers

Change ignition switch, not tumbler, but the switch inside the steering wheel, should fix the problem

Posted on Nov 13, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

Well find a good shop with fantastic rep for electrical diagnostics.

Posted on Dec 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1997 chevy blazer 4x4 4.3 engine dome lights will not go off even when car is running,when i loced doors with the automatic button light would come on and would only lock passenger door but w


there's a black box under neath the steering wheel behind the panel unplug it it worked for my blazer i had the same problem it took me 2 months to figure it out i changed all the dome light switched and the fuses so i unplugged the black box under the dash below the steering wheel and it works fine now

Nov 18, 2012 | 1997 Chevrolet Blazer

1 Answer

2004 Chevy Trail Blazer,blower fan not working and the brake and ABS lights are on in the dash, checked all fuses,nothing blown. Can not seem to narrow down which relay goes to this section. Any thoug


Hello Linda! Replacing the HDM relay for the low beams will not trigger any of these problems. If the blower isn't working, you probably need to get a new blower motor resistor (for manual controls) or blower motor module (looks the same) for automatic climate control. To access, need to remove the plastic kick panel near your feet on passenger side. After removed, look up you'll see the resistor, it's about 4" long with 2 small screws in it. You'll also need to drop the glovebox door to remove the connector from the resistor to the motor. Suggestion- buy a pig tail for the resistor also, these tend to melt. Very common problem. The ABS dash could be a bad wheel hub assembly or a hub starting to go bad.

Jan 24, 2018 | 2004 Chevrolet TrailBlazer

1 Answer

Electrical Problem for '04 Chevy Trail Blazer-the ABS and Emergency Brake light will come on and ding. When this happens, the blower for my heat/AC stops working. It still gets warm, but the blowe


that is strange. for the ABS has its own relay and so does the heater blower motor. they do not share the same outlet , I would check the wire at the bottom of the fuse box

Nov 09, 2012 | Cars & Trucks

1 Answer

I have '97 chevy blazer. the heater blower and power windows stop working when abs light comes on. when abs light goes off everything starts working again. any idea ? i was looking at wiring schematic and...


None of these things are related there all separate issues.
The window problem is in the door control master switch . the abs could be a wheel speed sensor vary likely and the blower motor could be an accuator or a bad vacuum switch or a bad connection at the blower motor or the resistors .

Feb 21, 2018 | 1997 Chevrolet Blazer

1 Answer

1997 chevy s10 blazerdash wont light up when key


the dash sound's like a fuse, check the fuse box under the hood and in the door jamb on the side of the dash, also check your fuel filter and fuel pump, im betting on the pump because i have a 2001 chevy blazer that has had two replaced and it has 233000km on it!

Jun 04, 2010 | 1997 Chevrolet Blazer

1 Answer

2001 blazer ABS light is on. When I first start moving,


hey did you ever figure out what the problem was, i have a chevy blazer with the same symptoms...need to know if its worth the money to fix.

Apr 25, 2010 | 2001 Chevrolet Blazer

1 Answer

What does a ABS sensor look like on a 97 chevy blazer


mid size blazer- take off wheel-brake caliper-brake caliper bracket- rotor-and behind the hub u will see a wire going into the back of hub and is secured by a hex/torx head bolt that is ur abs sensor it looks like a small cylinder with wires attached---on the s-10 blazer some of the abs sensors set ups-- are part of the hub assembly/wheel bearing would have to change the whole unit

Mar 05, 2010 | 1997 Chevrolet Blazer

4 Answers

I have a 1997 Blazer. The ABS light comes on intermittently. When the ABS light is on the power windows and blower motor do not work. When the ABS light is off everything works just fine. Help????


That sounds strange about the power windows and the blower motor not working when the ABS light comes on. I happen to have a 99 Chevy blazer and I had the ABS light come on several times. There are ABS sensors on the two front wheel bearing hubs. If you take off the front wheels you will be able to see a black electrical cable that has 2 wires inside of it. This cable is coming directly from the ABS sensor on the wheel hub and is strapped to a bracket the is on the upper ball joint. From the hub it then goes to a plug connector that is under the protective flap that you lift to change your spark plugs. What I found that is a common problem is that wire tends to corrode or doesn't have enough slack in it when making turns and starts to pull and break. Examine that cable and if you see any breaks in it, that will cause the ABS light to come on. Also if you can get to the plug underneath the flap, unplug it and use a multimeter to see if you are getting any resistance on the two wires. If you aren't getting any resistance then your sensor is bad or you have a broken wire to the sensor. On my vehicle the ABS light kept on coming goin on and off intermitently and I found that wire from the sensor to the plug had a break in it. I stripped the wires back, spliced them together, soldered them and I used heat shrink tubing to cover the connections. The ABS light went out and it has been fine ever since. Hopefully this will solve your problem as well.

Jan 24, 2010 | 1997 Chevrolet Blazer

1 Answer

1997 chevy s-10 blazer, when you turn the key on the dash lights come on & it will start. Lately I turn the key on & the dash lights do not come on, it turns over, but will not start. I have a...


In my 1997 chevy S-10 The gauge dash lights wont turn on when I flip the switch but both turn signals come on solid instead?!!? please help

Nov 19, 2009 | 1997 Chevrolet Blazer

2 Answers

Wiring diagram for 92 chevy blazer


My 1992 Chevy blazer s-10 starts and then the door locks automatically starts locking and unlocking...It wont stay running either...

Jun 11, 2009 | 1992 Chevrolet S-10 Blazer

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...