Question about Dodge Intrepid
1995 Dodge Intrepid turn signals and flashers wont work the relay will buzaz but no signals. changed relay but the same problem. once in a while the lights will work properly
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Naturally you need to remove the tire then the brake caliper. After the brake caliper is removed then you need to remove the 34mm axle nut that is inside the hub. After that is removed then you can remove the hub. Becareful not to damage the hub seal on the back or you will have to buy a new hub (100 or more). Then you need to remove the strut knuckle assembly. Once the knuckle assembly is removed then you can pull the CV axle. Take care the inner CV housing is held in place by an inner snap ring. You will probably have to pry off the inner housing. Once the axle is off then install the new axle (if you buy complete axle). Make sure if you are doing both that you take care which side you are installing. I made that mistake and double the work. Slide the new axle on the spline and make sure it is seated completely. Then put back together the reverse of removal.
Posted on Mar 24, 2009
check the switch it self may have to replace if everything is good grounds powers and lights, you can use a jumper wire to provide power to a ligh and if it illuminates you know the circuit is good, test each circuit and if all working replace
Posted on Aug 04, 2009
Tips for a great answer:
Dec 24, 2016 | 2002 Dodge Intrepid
Aug 24, 2014 | Cars & Trucks
Feb 23, 2013 | 1994 Dodge Intrepid
Feb 24, 2011 | 2001 Dodge Intrepid
Feb 14, 2011 | 1996 Dodge Intrepid
Oct 30, 2009 | 1995 Dodge Intrepid
Jun 25, 2009 | 2000 Dodge Intrepid
Sep 02, 2008 | 1994 Dodge Intrepid
141 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: