Question about Pontiac Bonneville

Open Question

How to adjust a rochester dualjet 210 carburator on a 1979 pontiac bonneville

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2002 Answers

SOURCE: Have a 1992 Pontiac Bonneville SE, runs

It sounds like your fans and sensors are workong like they should. The sensors work on temperature and should signal your fans to turn on between 109 and 200. They will stay running until the temperature drops back to that temp. You need to find out why your engine is runing warm, 210 is too high as a running temp. Make sure the cooling system isn't low on coolant first. If you still have the original radiator, it might be a good idea to have it flushed to clean out accumulated corrosion and **** . A "reverse flush" is the best. Your thermostat may be sticking if it's original.It has to come out for a reverse flush so make sure they replace it if you do that. It could be a collapsed hose. None of these things are overly expensive to repair but should be considered. I would try these first. Hope this helps.

Posted on Sep 12, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine valve adjustment for a 3.8L engine in a 1993 Pontiac Bonneville


they are not adjustable during routine maint.. they are hydraulic and if they are making noise, further investigation would be required

Apr 13, 2010 | 1993 Pontiac Bonneville

1 Answer

How to adjusting the idle on a double barrle carb(rochester)?its running at a high idle now.


The adjusment screw is on the cam just below where the throttle cable connects to the carburator.

Feb 24, 2010 | 1983 Chevrolet El Camino

1 Answer

Have a 1992 Pontiac Bonneville SE, runs


It sounds like your fans and sensors are workong like they should. The sensors work on temperature and should signal your fans to turn on between 109 and 200. They will stay running until the temperature drops back to that temp. You need to find out why your engine is runing warm, 210 is too high as a running temp. Make sure the cooling system isn't low on coolant first. If you still have the original radiator, it might be a good idea to have it flushed to clean out accumulated corrosion and **** . A "reverse flush" is the best. Your thermostat may be sticking if it's original.It has to come out for a reverse flush so make sure they replace it if you do that. It could be a collapsed hose. None of these things are overly expensive to repair but should be considered. I would try these first. Hope this helps.

Sep 12, 2009 | 1995 Pontiac Bonneville

1 Answer

How do I adjust my timing for a 79 Pontiac Bonneville Brougham, and if my lifters are worn is this a job that I could do myself or something I may want the shop to handle


To set the timing,unplug the vacuum line to distributer and plug. Loosen the hold down bolt and with the light set timing at 12 degrees if it is a pontiac engine,if chevy engine set at 8 degree's,if buich engine 15 degree's,if olds engine set at 20 degree's.They used all these engines in pontiac product'a in 1979.To change lifter's it's a pretty big job,I talked to ya earlier about your veh., and usually if you replace lifter's due to wear the came should really be replaced due to wear and that's a pretty big job for most. If you really want to keep your veh. for a while that is the proper repair procedure.Most shop's probably won't do one without the other to warranty their work.

Aug 11, 2009 | 1978 Pontiac Bonneville

1 Answer

Engine knocks at startup


It could be the oil pump, its not a bad idea to check the type of engine oil you are using maybe you can go a little higher in grade,
you can also try to use STP Engine oil treatment for petrol (gas) as addative to the engine oil it may help.
Hope this helps!

Feb 27, 2009 | 1978 Pontiac Bonneville

1 Answer

Carburator


Hi,

To my knowledge, the gas tank vent does not hook up to the carburator, it is just a means of escape for trapped air inside the gas tank, so normally it is just left hanging.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jul 27, 2008 | 1979 Pontiac Firebird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,023 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...