Question about 2002 Toyota Avalon

2 Answers

What is the technique for replacing the driver side wiper blade?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

Here is one video. Look at others if this one does not help. Merry Christmas.

Posted on Dec 11, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 22,326 Answers

Your joking ?? well here goes ,turn blade to right angles of the arm.put a cushion where the arm should be on screen ,if it pings it will break the screen,now push the little clip on the end of the plastic slide in and push blade downwards and it come frr from the end of the arm ,then more length ways a little and it pull off .BE CAREFUL OF THE SCREEN clever **** here cracked one last week ,hence cushion

Posted on Dec 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adjust wiper arm


Remove cover at pivot point and tighten nut.

Oct 30, 2013 | 2002 Oldsmobile Silhouette

1 Answer

1999 Cadillac Deville wiper blade on driver side not moving


bent/broken wiper arms under the base of the windshield..remove the vent cover and service/replace broken parts.

Feb 09, 2013 | 1999 Cadillac DeVille

1 Answer

2000 BUICK REGAL MY WIPER BLADES (DRIVER SIDE) WENT OFF THE WINDSHIELD THE OTHER NIGHT. WHEN I PUT IT BACK IT DID NOT WORK PROPERTY WHAT COULD BE WRONG DO I NEED TO TAKE IT TO A DEALER?


i`m not sure what you mean by it not working properly i assume that you mean it goes back and forth like the passenger side, but it doesn`t clean the window and you put the blade on the arm correctly then the wiper may be damaged and you will have to replace the wiper blade.check and compare the installation of the driver`s side to the passenger side wiper and correct the installation of the blade

Mar 08, 2011 | 1999 Buick Century

1 Answer

I need to have 'step-by-step' instructions for replacing the driver side windshield wiper arm on my 2000 Ford Explorer. Can you help me with this?


  • Turn your wipers off, using the stalk on the left side of your steering column. Turn your ignition off and remove the key.

  • 2

    Pull the wiper blade up to lift it to the service position. Pull the front part of the blade down to position it at an angle.

  • 3

    Pull back the lock pin on the center part of the wiper blade (where it connects to the wiper arm). This unlocks the blade from the wiper arm.

  • 4

    Grasp the blade on each side and pull it down (away from the extended wiper arm) to release it from the "U" clip.

  • 5

    Repeat the process for the other wiper blade, if desired. Removing the driver's side and passenger's side wiper blade is the same.

  • 6

    Install the new wiper blade. Open the lock pin on the new blade, and then insert it into the wiper arm "U" clip. Close the lock pin and lower the wiper blade to its normal position.

  • Jan 29, 2011 | Ford Explorer Cars & Trucks

    1 Answer

    How to remove the wiper arm from the shaft so I can remove the cslotted cowl to replace the wiper bushings.


    REMOVAL & INSTALLATION
    (see Figures 1 and 2)

    To remove the arm from the pivot, lift the arm to permit the latch to be pulled out to the holding position and remove the arm from the pivot with a rocking motion.

    zjlimited_140.jpg

    Fig. 1: Mount the wiper blade/arm as shown-Dakota models

    zjlimited_141.jpg

    Fig. 2: Mount the wiper blade/arm as shown-1994-96 Pick-ups



    When installing the arms, the at-rest position of the blades should be determined before pushing the arm onto the pivot. For Dakota trucks, the tip of the driver's side blade should be 0.51-2.63 in. (13-67mm) above the cowl panel and the passenger's side blade should be 0.94-3.06 in. (24-78mm) above the cowl panel. For 1989-93 Pick-ups and Ramchargers, the driver's side blade should be 1.84 in. (47mm) above the windshield weatherstripping at the heel of the blade; the passenger's side blade should be 2.24 in. (57mm) above the weatherstripping. For 1994-96 Pick-ups, the wiper motor must be in the PARK position and the wiper blade should be about 0.85 in. (22mm) from the upper edge of the black-out areas at the base of the windshield.


    Hope this helps to solve it.

    Nov 26, 2010 | 1992 Dodge Ram 250

    1 Answer

    2005 tahoe wiper replacement


    My tahoe has a plastic piece just to the left of the metal attaching arm. It is easiest to see on the driver side wiper. There is just enough room to slip a flat blade screw driver into and then pop upwards. After this clip is popped, slowly move the wiper blade to the right as you pull that clip further upward. The blade can now be removed. Of course if you have a different type blade this will not work.

    Dec 14, 2009 | 2006 Chevrolet Tahoe

    1 Answer

    Driver side wiper blade doesn't sync with passenger side blade


    the wiper arm assembly is stripped for the knurled knob that is sits on.  replace the wiper arm with a new one.

    Mar 30, 2009 | 1995 Geo Prizm

    2 Answers

    2005 Chevy Equinox Wiper blade hits edge of window


    The 23 should work on the drivers side but you will need a 19" on the passenger side.
    Hope this helps and let me know.
    Regards,

    Feb 18, 2009 | 2005 Chevrolet Equinox

    1 Answer

    Auto maintanence


    Yes the spring in the arm is weak, replace the arm and your problem will be solved.

    Oct 06, 2008 | 2000 Mercury Grand Marquis

    Not finding what you are looking for?
    2002 Toyota Avalon Logo

    Related Topics:

    140 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    79024 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8836 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...