Question about 1986 Chrysler LeBaron

2 Answers

1986 Chrysler 2.2 ltr fuel injection-turbo, I had carfully washed down the engine, after I did I failed to immediatly start it like I usually do. When I did try it would not start. I have now put in a new coil, new rotor and cap and new wires and spark plugs and thought it would fire rite up,but NO. So, does anyone have any ideas why it will not start up. thanks

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Replace the pick-coil sit under distributor rotor slide right out.Good Luck

Posted on Dec 11, 2009

Testimonial: "I ordered the part from NAPA and I'll get it in the am, thanks to you this is a part I would have never thought to replace, wish me luck,anymore suggt"

  • Alexander Mimun
    Alexander Mimun Dec 11, 2009

    also check timing belt while you have cap off crank engine make sure rotor turn's.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

WD-40 , no kidding. read the can "starts wet engines"

Posted on Jan 29, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1986 mr2 used up a full tank in 5 days


wow, i love MR2, sell it to me.... lust..... sorry.......
USA Car?????????
its sucking fuel, can be lots of things
got the FSM yet?, keeping a very old car like this going without the big book is near impossible...... really... why work blind>?
you got the 4A non turbo engine>?

1.6 L 4A-GE DOHC I4 (AW11)

wiki (USA)
As a power plant, Toyota chose to use the naturally aspirated 4A-GE 1,587 cc inline-four engine, a dual overhead-cam, four-valve-per-cylinder motor.[5] This engine was also equipped with DENSO electronic port fuel injection and a variable intake geometry ("T-VIS"), giving the engine a maximum power output of 112 hp

first what engine then what fuel injection.
Study the Denso system first, then trouble shoot.
If I had this, car i'd :
1: make brakes perfect.
2: fix all fuel leaks, every inch checked,!!!! top reason for midengine car fires...
3: compression on all cylinders (WOT) 150PSI or more.
4: full tune up with all fluids. really !
5: i'd then check all the EFI sensors and have the the injectors pro cleaned off car, (sonic cleaned)
6: engine thermosat holding water temp at 180F or more steady!!!
7: back flush every inch of cooling system and sub parts.

after all that id diagnose it.
starting with fuel pressure tests , all 6 of them.
ask.

TSB's the update MR2 engine signal (spark) generators (sensor)
old ones are no good.
bid away
http://www.ebay.com/itm/1986-Toyota-MR2-Manuals-/181281489430?pt=US_Nonfiction_Book&hash=item2a35380216


Dec 15, 2013 | Toyota MR2 Cars & Trucks

1 Answer

I would like to know why 1998 Chrysler intrepid 2.7 ltr starts up with the foot on the excelerator then only drives so far and stalls out. It will sit minutes sometimes hours then starts back up to do the...


Is the fuel pump failing?

The car has to be tested to find
& solve any issues,no one can guess,
just to give you an answer

To start any fuel injected vehicle made in the last 30 years,
you do not need to touch the gas pedal

Aug 29, 2013 | Cars & Trucks

1 Answer

I have a 1986 300 GD Mercedes wagon with a 617 ,5cly diesel none turbo.Its injection pump has only one vacuum line to it for a kill switch. Now I bought a 1978 300TD for the 5 cyl diesel to put in my wagon...


email me at iambanshee74@yahoo.com and put your wallet away. I have some manuals in my archives that I would not mind sharing. That is for a 123 body and I do have the vacuum and engine diagrams/manuals you will need. Great little cars.

Jun 03, 2011 | Mercedes-Benz 300-Class Cars & Trucks

1 Answer

92 Ford 7.3 non-turbo won't start - worked fine minutes earlier


this may sound stupid but the next time this happens take some ice cold water and pour it over the injection pump.if it starts what you nhave is a bad pump.this is usually caused by someone washing off a hot motor and what happens is it changes the clearances just enough that hot, the pump cannot reach min injection pressure. the injection pump is located in the center front of the motor

Aug 23, 2009 | Ford F-450 Cars & Trucks

1 Answer

1986 C Lebaron turbo 4 cyl. black smoke when


Black smoke is excessive burnt fuel. White is excessive unburnt fuel. Have your turbo checked and the air filter. Good Luck

Aug 22, 2009 | 1986 Chrysler LeBaron

2 Answers

Hard to start


Fuel pump is a possible cause but I would check the ignition timing first.

Jun 30, 2009 | 1986 Toyota Pickup 4WD

1 Answer

I have a 97 sebring that wont start. It has plenty of juice to turn it over but wont. would this be a fuel pump, maybe a fuel filter or like fuel injectors? im not sure if its even fuel injected though.


ALL American sold vehicles are fuel injected since around 1986. That having been said, have someone put their ear against the open fuel filler tube. Turn the key on 2 or 3 times(not over) just on. If they dont hear a hum for about 2 seconds you'lll probably need an in tank fuel pump. Sometimes it's the relay but rarely.

Jun 27, 2009 | 1997 Chrysler Sebring

3 Answers

Will a 2.2 motor fit into my 90 dodge shadow?


Chilton shows 2.2, 2.5, and 2.6 motors for that year Shadow so Im guessing a 2.2 will work but might lack the power you were used to. Best of luck.
Greg

May 30, 2009 | 1990 Dodge Shadow

1 Answer

86 lebaron gts will not turn over


what engine does your lebaron have ? TBI or turbo ?

Dec 18, 2008 | 1986 Chrysler LeBaron

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

83772 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...