Question about 1993 Dodge Caravan

1 Answer

How to replace a thermostat on a 1993 dodge cARAVAN

Posted by on

  • Mike Butler
    Mike Butler May 11, 2010

    Please specify what engine. 2.5L, 3.0L, or 3.3L?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

Follow the lower radiator hose back from the radiator to the engine. Where it attaches is the thermostat housing. Open that up, remove the old thermostat, put the new one in (there's a small bleed valve on the face of the thermostat -that needs to be at the 12 o'clock position), reassemble, and then burp the cooling system (click my screenname, go to Tips and Tricks, and follow the burping instructions there).

Posted on Dec 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 dodge caravan warm when idles, cold when drivesd


Did you bled the air out of the cooling system? Do that and I bet it cures the complaint.

Oct 09, 2012 | 1993 Dodge Caravan

1 Answer

How do I change my thermostat? 93 Dodge Grand Caravan SE


IT'S ON THE END OF THE TOP RADIATOR HOSE WHERE IT CONNECTS TO THE ENGINE. SHOULD BE 2-3 BOLTS GET NEW THERMOSTAT FIRST SHOULD COME W/GASKET. PAY CLOSE ATTENTION TO POSITION OF OLD THERMOSTAT SO YOU DON'T PUT NEW ONE IN UPSIDE DOWN.
GOOD LUCK

Dec 11, 2010 | 1993 Dodge Grand Caravan

1 Answer

Changing a thermastat on a 2003 Caravan


the 1993 caravan had two engines offered a 2.5L 4cylinder and a 3.3L v6........on the 2.5L the thermostat is located on the front of the cylinder head were the top radiator hose attach's.
remove the top hose were it attach's to the thermostat housing and the remove the thermostat housing and lift out the thermostat and replace with the new one making sure the spring on the thermostat is facing the engine replace the thermostat housing and top radiator hose and remove the bleeder screw from the top of the thermostat housing and fill radiator with new antifreeze. when you see antifreeze coming out the bleeder hole replace the bleeder screw.

The 3.3L v6 also has the thermostat at the front of the cylinder head were the top radiator hose attach's the thermostat housing the procher is the same except for bleeding the radiator, to bleed the cooling system remove the coolant temp. sensor it is located just below the thermostat housing and fill radiator with new antifreeze until the antifreeze starts coming out the coolent tempt sensor hole them reinstall the sensor and top of radiator.........GOOD LUCK

Dec 09, 2010 | 2003 Dodge Caravan

1 Answer

HOW TO REPLACE INNER CV BOOT LEFT FRONT AXLE 1993 DODGE GRAND CARAVAN


You need to break the front suspension loose on that side and remove the drive axle.
I would replace the entire axle with a reman

Aug 03, 2010 | 1993 Dodge Grand Caravan

1 Answer

Stalling all the time, battery is fine, over heating sometimes, put in new thermostat, not working any better


Hi, does it use any water from the radiator - is there any water droplets in the engine oil,. If so , head gasket will need replacing etc, good luck.

Feb 18, 2010 | 1993 Dodge Caravan

1 Answer

Replaced fuel pump and fuel filter on my 1993 Dodge Grand Caravan, and now it idles to fast.


The idle air control is stuck,remove it and clean it,or replace it if the cleaning does not help.

Jan 30, 2010 | 1993 Dodge Grand Caravan

1 Answer

Where is the oil sensor located on my 1993 dodge caravan?


1993 Dodge Truck Caravan 2WD 3.0L MFI 6cyl
Oil Pressure Switch: is located under hood, center, front engine area, above oil filter, mounted in block.

Good luck.

Sep 14, 2009 | 1993 Dodge Caravan

1 Answer

How do you replace rotors on a 1993 Dodge Caravan SE?


Cause thair are Pins Holding them in if u Look again u can see Very Simple Fix also when u go to Remove them use WD 40 to Losein them up frist

Feb 17, 2009 | 1998 Dodge Caravan

1 Answer

1993 Dodge 12-passenger van with 318 engine


Try changing out the thermostat. Sometimes they will not open all the way and it will cause the vehicle to overheat and not start.

Sep 30, 2008 | 1993 Dodge Caravan

Not finding what you are looking for?
1993 Dodge Caravan Logo

Related Topics:

483 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

83644 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22393 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...