Question about 1999 Oldsmobile Intrigue

2 Answers

Oldsmobile intrigue 1999 crankshaft position sensor. Iknow it is behind the starter. do I have to remove the starter to get it out

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 173 Answers

Hello...

In order to give you able space, the starter needs to be removed.

Hope this helps... Good Luck...

Mike

Posted on Dec 11, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 615 Answers

Not sure, but even if you get it replaced there is a "learn" procedure that must be run to calibrate the new part. I didn't have the instrument to do it, so I had to have it done by a mechanic that did.

Posted on Dec 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the crank sensor on a 2001 GM Intrigue?


Oldsmobile Intrigue ! 3.5 L V-6
Crankshaft Position (CKP) Sensor
On the rear of the engine - left, above the starter

Oct 27, 2015 | Cars & Trucks

1 Answer

Hi, I need to know where located the crankshaft sensor of a Oldsmobile intrigue gsl 2001 3.5


CRANKSHAFT POSITION SENSOR LOCATED BEHIND CRANKSHAFT BALANCER WHICH IS THE CRANKSHAFT PULLEY.

Apr 10, 2011 | Oldsmobile Intrigue Cars & Trucks

1 Answer

Where can i find the crankshaft sensor on my 2002 oldsmobile intrugue


On a 2000 Oldsmobile Intrigue with a 3.5L engine it is behind the starter at the front of the car. Hope this helps.

I had to replace the Crankshaft position Sensor on my 99 GL with 3.5L. It was on the backside of the block directly above the starter. To get to it, I unbolted the starter from the transmission and dropped it down a few inches. The Crank sensor is mounted to the block with a single small bolt that is hard to get at, but you can see it. You'll need a fairly flat socket or wrench to work it loose as there isn't much room.

On a 2001 with the 3.5L it is located on the front of the engine, more to the drivers side than the passenger side. You will need a 15 mm socket and an 8 inch extension for the starter bolts. You will need a 10 mm wrench for the plastic shroud which helps support the starter, and also the sensor bolt uses the 10mm wrench as well. I found it easier to slide feet first under the properly supported car to do the work. The higher you can get the car, more arm room you will have as the sensor is in a kind of awkward space.

Jan 30, 2011 | 2002 Oldsmobile Intrigue

1 Answer

Where is the Crank Shaft Position Sensor located on the Oldsmobile Intrigue 2000


The crankshaft position sensor is located just above the starter on the engine block.Hope this helps.Good luck.

Nov 06, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Crankshaft sensor location on 2001 oldsmobile


. Its above the starter going into the side of the block. (front side of the engine) Disconnect the battery. Remove the starter. Remove the wIre CONNECTOR plug to the sensor. The sensor has 1 bolt holding it in. Remove the bolt, you may have to wiggle the sensor at the base a bit as you pull it out. Replace, and make sure it is pushed in all of the way. Replace the bolt, wire plug, starter, reconnect the battery.

Jun 05, 2010 | 2001 Oldsmobile Intrigue

1 Answer

Where is the crankshaft position sensor located?


This is a quick answer. Its above the starter going into the side of the block. (front side of the engine) Disconnect the battery. Remove the starter. Remove the wore plug into the sensor. The sensor has 1 bolt holding it in. Remove the bolt, you may have to wiggle the sensor at the base a bit as you pull it out. Replace, and make sure it is pushed in all of the way. Replace the bolt, wire plug, starter, reconnect the battery.

Jun 05, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Trying to replace the crankshaft position sensor on a 2001 olds intrigue and cannot locate it. Where is it?


Hello suewagner.
The crank sensor is mounted above the starter motor on the firewall side of the engine. The sensor picks up the signal direct off of the crankshaft through a machined hole in the engine block.
I have removed them without dropping the starter but learned that in most cases it is easier to drop the starter down to access it.
Here is a diagram for you.

96819d7.gif

There you are, hope this helps you.
Take care,
KL

Apr 11, 2010 | 2001 Oldsmobile Intrigue

2 Answers

Where is the crankshaft position sensor located on a 2000 intrigu


Should be located around 11:00 on front of engine at crank pully.

Oct 28, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Crank position sensor location


you will need to remove the starter to gain acess to the ckp sensor. once you remove the starter look on the engine block and you will see the sensor. The only problem with doing this repair yourself is that you will not be able to preform the crankshaft position variation learn procedure with out a factory scan tool. The vehicle may crank an run, but the timing advance curves will be wrong so the vehicle will probably cut off every time you remove your foot from the gas pedal. Hope this info helps!

I’m happy to assist further over the phone at https://www.6ya.com/expert/jonathan_3a3c556b4b17d1d2

Aug 18, 2008 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Marvin
Marvin

Level 3 Expert

83593 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22393 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...