Question about 2000 Chevrolet S-10

1 Answer

My parking brake on a 2000 S-10 Blazer will not release when I pull the release handle. How can I release the parking brake?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You need to inspect the cables for binding and it checks good then your cables might be pulled out or the actuator at pedal is stuck most GM come a release at assembly ,you may have feel around for it by the actuator just above the pedal .

Posted on Dec 11, 2009

Testimonial: "Finding the accutuator helped me to release the brake. I will need to disassemble the release as it appears there is another problem. Thank you!"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How too release the emergency brake foot pedal when the cable is broken?


About 73,400 results (0.87 seconds) Search Results

    Parking brake release cable snaps - Chevy Avalanche Fan Club of ...

    chevyavalanchefanclub.com > ... > Problems: Brakes

    24 posts - ‎16 authors
    Went to release the parking brake on my 04 and the cable snapped. ... More like the end cap coming of the cable that attaches to the foot pedal. ..... Then I released the parking brake, pulled out the broken release cable/handle assembly, ...

    How To Install Repair Replace Parking Brake Release ...

    ? 5:54
    https://www.youtube.com/watch?v=qx0oGfV62NQ
    Jun 23, 2011 - Uploaded by 1A Auto Parts
    How To Install Repair Replace Parking Brake Release CableHandle ... or replace a broken or worn out parking brake release cable handle.

    Emergency Brake Pedal Assembly & Stuck Brake Cable ...

    ? 10:13
    https://www.youtube.com/watch?v=0jYfvthBzhU
    Apr 17, 2014 - Uploaded by corgLLC
    Emergency (Parking) Brake Pedal Assembly & Stuck Emergency (Parking) Rear Brake Cable The emergency ...

    E-Brake Cable Broken? Stuck Emergency Brake... Help Please ' Chevy ...

    www.tahoeyukonforum.com > ... > Engine & Drivetrain


Jan 25, 2016 | Cars & Trucks

1 Answer

How to remove a parking brake release handle on a 1999 chevy blazer


Are you talking about the Foot Pedal Assembly?
Has a couple of bolts attaching it to bottom of dash and the cable running to the rear brakes. Hardest part might be unhooking the cable.

Dec 14, 2014 | 1999 Chevrolet Blazer

1 Answer

Parking brake will not release when I pull the handle. There is resistance in the handle


check under the dash to see if your signal relay is in place. they have a tendency to pop out and rest on the upper part of your braking arm and since it is lose, it will roll with the arm. if that is the case, pop it back in and use a plastic tie to hold it in place. good luck

Feb 06, 2014 | 2003 Chevrolet Blazer

1 Answer

Manuel Parking brake release the parking brake is stuck and we are trying to get it released how do you do it?


Foot Park Brake...
There should be a release lever(not the main release) up at the top of the park brake arm, under the dash. Its small, 1.5 to 2 inches long. I recommend using a screwdriver to "flip It", keeping your fingers and hand and your face for that matter, away from the arm. It is spring loaded and will release/move very fast. Also it could just be that someone unitentionally stepped on the pedal really hard, and it will take the same amount of foot pressure to release it while pulling on the release handle.

Hand Park Brake...
Again the same principle applies. It will take the same pressure applied to release it. Push in ******* the release while pulling up ******* the handle. This one can also be released by using a screwdriver to pop the the locking tab.

Aug 18, 2011 | 2003 Buick LeSabre

2 Answers

Broke parking brake cable. Need to release park brake to get it to shop for repairs.


You need to lower the underdash shroud. Couple 7mm nuts hold it on. Look to the left at the parking brake pedal. Follow along a black sort of tube to the end. That end will have a cable comming out of it. Follow the cable. The cable is attached to the parking brake release lever. Pull the cable or the release handle and the parking brake should release.

Mar 03, 2011 | 2000 Chevrolet Blazer

1 Answer

My parking brake release is broken. I cannot release the parking brake. How do I fix it?


For the time being, you can crawl down under the dash, follow the parking brake cable and see where it connects to the brake mechanism under the dash. You will be able to pull or pry on that part in order to release the parking brake. To replace, remove the cable from the points where it's attached (dash, brake release mechanism) and reinstall the new one.

Jun 14, 2010 | 2001 Chevrolet Blazer

2 Answers

Parking brake won't release


Try pushing down on the parking brake while pulling on the release handle.Downward pressure may make the release handle easier to pull.Good luck,
ChevRev

Mar 21, 2009 | 1988 Chevrolet Astro Cargo

1 Answer

2000 blazer parking release handle broken


You will have to look under the side panel, and you can release it with a screw driver, or get a pair of vise grips to pull the cable to release it.

Jan 18, 2009 | 2000 Chevrolet Blazer

1 Answer

97 honda civic dx the parking brake wont release and it sticking.


what i find common is the parking brake handle slides up over time covering the release button and not allowing the park brake to go down. can you push the button with your fingertip while pulling up on the handle and release the park brake? if so you can tap the handle to the rear with out hitting the button. protect the button with a socket or use a block of wood next to the button. don't hit the button.

Dec 27, 2008 | 1997 Honda Civic

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

612 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...