Question about 2006 Buick Lucerne

2 Answers

How do you access the windshield washer pump on a 2006 buick lucerne

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 7 Answers

The washer pump is located on the bottom of the wash fluid bootle. you can access it by removing the front passanger fender liner..

Posted on Jan 12, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

For the most part its on the bottom of the windshield washer bottle and you have to remove it to get to it stop by your local GM-dealership in the parts department and they be able to print you off pictures and diagrams showing you how to replace it wish you the best of luck Michigan Man.

Posted on Dec 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace washer pump 2008 buick lucern


Easy, locate pump under- or attached to resevoir at lower end, remove it gentle by pulling upward, replace with new one.

Feb 16, 2015 | 2008 Buick Lucerne

3 Answers

WINDSHIELD WASHER NOT WORKING. HAS FLUID


Your hoses could be frozen if its cold where you are. Check the hoses for cracks. You might find fluid in your engine compartment if you have a broken hose. Listen to hear if the motor is pumping. There should be some sound either a click or a whiz sound when you push the washer button. If you hear no sound then check the wires on the pump. If they look good you probably need to replace the pump.

Sep 30, 2014 | 2006 Buick Lucerne

1 Answer

How to remove water pump from buick lucerne of 2006?


This should help,
https://www.youtube.com/results?search_query=How+to+remove+water+pump+from+buick+lucerne+of+2006%3F

Sep 06, 2014 | Cars & Trucks

1 Answer

Location of windshield washer pump on 2006 buick lucerne


The pump is located on the passenger side below the jug that holds the fluid. Separate the wheel well anchors. I bought a special tool that helps immensely it is like a fork that gets on each side of the plastic rivet and is bent to pry them up. You also need to take some off the splash guard. Once you see it, it is very very easy to take out. Hope you don't have a full jug because it will empty. Cost about $14.00 at RockAuto.com

Jul 10, 2014 | 2006 Buick Lucerne

1 Answer

I need to see the order of the cylinders to replace the ignition coils in a 2006 buick lucerne v8


The 4.6 engine should be the same as Cadillac, so the odd cylinders are next to the windshield. Number 3 would be second from the passenger side.

Mar 06, 2014 | 2006 Buick Lucerne CXL

1 Answer

Where is the windshield washer pump for a 2007 Buick Lucerne?


Normally they are located on the bottom of the windshield washer resivoir or nearby.

Aug 09, 2011 | 2006 Buick Lucerne

1 Answer

REPLACE WINDSHIELD WASHER PUMP


These are usually located in the bottom of the washer fluid resivoir. Find what holds the tank in and lift it out. watch the wires sometimes u have to unplug it first.

Note. These very rarely go bad. have someone turn it on and listen for buzzing noise and follow tubes you may have a diconnected line instead.

Also after its out bench test it by jumping 12 volts positive to red and negative to black to the pump ans see if it works before you install the new one. Since there may be another problem.

Feb 17, 2011 | 2006 Buick Lucerne

Not finding what you are looking for?
2006 Buick Lucerne Logo

1,624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

79024 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...