Question about 1994 Jeep Grand Cherokee

2 Answers

I replaces a bent push rod in my 1994 jeep grand cherokee and now its running rough and dies.

Posted by on

  • Brad Brown May 11, 2010

    Are there any codes logged? It sounds like you are a little out of time.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Jeep Master
  • 2,030 Answers

What made it bend did you find that out? Perhaps you have others bent, or bent or bad rocker arms as well. Possibly even bad lifters or worn cam.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Posted on Dec 11, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Take compression test on that cylinder might be out of adj.( valve open to much )

Posted on Dec 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT ARE THE SYMPTOMS THAT A FUEL PUMP NEEDS TO BE REPLACED ON A 2000 JEEP GRAND CHEROKEE


it will not start or will idle rough or just die ....need to check to see if have pressure in the fuel rail...also turn key on and see if you hear the pump run in the fuel tank

Nov 26, 2012 | 2000 Jeep Grand Cherokee

1 Answer

94 jeep grand cherokee front end vibration


Many things will cause vibrations, especially on 4WD trucks. Causes include: worn ball joints, worn tie rod ends, bent wheels, tires out of balance/shifted belt in tire, worn steering dampener, worn u-joints, worn CV joints, engine problems such as engine misfire, a bad fuel injector clogged fuel filter or injectors, worn ignition parts, etc. I suggest you apply the service brake in gear and give it a lot of throttle (power-brake)to determine if the engine is running smoothly or if it runs rough. Also, with the hood up, you can see the shaking if it occurs. If rough, check everything over and repair as necessary. If smooth, start checking ALL other vehicle systems and repair as necessary.

Oct 07, 2012 | 1994 Jeep Grand Cherokee

1 Answer

My 1994 Jeep Grand Cherokee with the 5.2L is very difficult to start if it has not been run in the previous 6 hours. Replaced ignition coil but didn't solve the problem. After sitting overnight it


Low fuel pressure.
You need to check the fuel pressure on the first crank and watch it as it is running.
Requires a special gauge.
If it were just a starting problem I would say it could be a pump relay, but not if it runs rough for 5 min.
Might be a dirty filter or problem in the tank.

Jun 29, 2012 | 1994 Jeep Grand Cherokee

1 Answer

1994 jeep grand cherokee limited 4.0 running rough and very rich all the time


Is the inside of the engine components have been you replace or check?

Jan 12, 2012 | 1994 Jeep Grand Cherokee

1 Answer

I have a 1994 jeep grand cherokee ladero....Its making rough cackling sounds today...it jst started doing that when i started it up for work...it sounds horrible...but it still drives n crank up...its...


If you have no 'check engine' light, you will need a technician to diagnose it and I would recommend NOT driving it. If, for example, a rod cap has come loose, it will destroy the engine if it gets even looser.

Apr 08, 2011 | 1994 Jeep Grand Cherokee

1 Answer

Took my 1996 Jeep Grand Cherokee Laredo to the shop because it has been dying on me while driving also its been rumbling now i got it today they said they changed some parts but now its worst they took...


It has this problem at Idle? If this problem is while the vehicle is moving but not at Idle or when you rev the motor check your A frame, Connecting Rods, Tie Rods and Ball joints. You also want to check to loose lug nuts or a bent rim. If it occurs when it sits at idle check the motor mounts and bushings and the transmission mounts and bushings.

Sep 15, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Lifters nocking on my jeep cherokee


I had the same problem , Come to find out it was the crank barring's and not the lifter's. Take one of the crank barring's off and feel the crank where the barring goes and if it's rough it's more in likely the crank and not the lifter's but if it's smooth put the crank barring back pull the valve cover's and there's the lifter's , pull the nut off the lifter's and pull the lifter rod's out roll them on a flate surface to see if there bent. Then go to a auto part's store and get the haynes manual it will tell you everything you need to know.

Apr 29, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Quits running


bad egr if it happens while pushing pedal will also cause a rough idle,if so plugs will have to changed for they are fouled out.going by your posting so if you have more info let me know,black smoke ect.
there are alot of things that cause this same issue.

Feb 07, 2009 | 1994 Jeep Grand Cherokee

1 Answer

1996 Jeep Grand Cherokee stalls when brakes are applied


My 2000 Grand Cherokee had the same problem, without all the sputtering, it would just die approaching a stop. We could only keep it running by slightly pushing down on the gas petal when coming to a stop. I replaced the Throttle Position Sensor, but that didn't change anything. A new mechanic I found replaced the Idle Air Control Valve, and we've had no problems in a week.

Jan 02, 2009 | 1986 Jeep Cherokee

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

82322 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...