Question about Volvo S60

1 Answer

I have 2.0T 2004 model with 46K which has a squeaking noise on idle which appeared to come from the timing belt / tensioner. As my timing belt was due for change, I replaced it along with tensioner and aux belts but this hasn't solved it. Any idea what it could be?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 167 Answers

I would check the Alternator, waterpump and power steering, try spraying WD40 or CRC556 on each auxillary one at a time to isolate the problem, the squeak should diminish when you hit the right bit. Don't forget to wash it off when you are finished. Good Luck

Posted on Dec 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to check 2004 pt cruiser noise belt


use crc belt grip product
replace the hard /old belt
check for pulleys not spinning freely
check and adjust belt tension

Jan 05, 2016 | 2004 Chrysler PT Cruiser

1 Answer

Why is there a squeaking noise only when I drive at night


at night, it is cold, your drive belt gets worn other time, when it's cold at night it doesn't get much grip, so it squeaks, what you can do is tighten it up, find which one is loose by pressing on them. The concept of belt tensioning is simple, look it up, on all cars work the same.

May 05, 2014 | Daihatsu Cars & Trucks

1 Answer

My cutlass 98 makes loud squeaking noise when idle


Your belt tensioner is possibly bad which could cause it to slip at low rpm.

Mar 15, 2013 | Oldsmobile Cutlass Supreme Cars & Trucks

2 Answers

Squeaking while driving


jack up each wheel and turn them see if noise is comeing from wheel moveing or could be in drive train or worn out brakes squelers going off

Dec 12, 2011 | 2004 Kia Sedona

3 Answers

The belts continue to make a loud screeching noises when i drive over 55. Sometimes when the car is idling the belts make noise. Could it be the tension pulley.


it could be the tensioner, water pump, alternator, A/C compressor, power steering, or even a really bad serpentine belt. The only way to be sure is to remove the s-belt and spin-check the pulleys and listen for squeaks or grinding bearings.

Jan 13, 2011 | 1984 Buick LeSabre

2 Answers

How to tighten /loosen belts on a 2000 xterra, its making a super loud squeaking noise when i turn on the car


The only cure to fix squeaking belts, is to replace with the new one. When the belts start squeaking noise, then it is the time to check the status of the timing belt or chain, depending on the size of the engine.
The 2000-2004 Nissan Xterra was offered with the choice of 2.4L 4-cylinder or 3.3L V6 engine.
The 2.4-liter 4-cylinder DOHC engine was a pretty good reliable engine, but for this truck, it was underpowered. This engine has a long-lasting timing chain - there is no timing belt to replace.
The 3.3-liter V6 SOHC was also a bit slow on pick-up, but for daily use, it was pretty good, durable, simple engine. This engine has a timing belt that needs to be replaced at recommended intervals. The SE model offered a supercharged version of the same engine with more power.
To get more information, please read my tip :
When should I change the timing belt on my car?
http://www.fixya.com/cars/r6481199-when_change_timing_belt_car

Nov 21, 2010 | 2000 Nissan Xterra

1 Answer

Squeaking noise in engine. not serpentine belt.


You might have a dry bearing in the alternator. I've had a squeaking noise from them.

May 15, 2010 | 2004 Chevrolet Silverado

1 Answer

I am experiencing a squeaking noise from infront near the fan belt area. when i accelerate,it gets louder. I discovered that the power steering pump is leaking ,so i topped up the reservoir and it stopped...


i have a similar problem. a squeaking noise, sounds when i start the engine, and when i stop the engine. at times it comes when the engine is running and idle, and it lasts some time like a high pitched whistle. Ive had several mechanics look at it, and it seem to be one of the smaller pulleys that the belts run around. in the 2002 model (petrol) of the crv the belts are not the cam belts, becuase this model has a cam chain (much more robust!). so they all said its nothing to worry about. you can try having your pulley replaced.

Jan 18, 2010 | 2002 Honda CR-V

2 Answers

Cant locate squeaking sound


u can locate this noise with a mechanics stethoscope, avil for about $10 at any good auto parts store, listen to all the pulley bearings for a noise.

Oct 26, 2009 | Dodge Durango Cars & Trucks

2 Answers

2003 GMC Yukon


AC pump clutch bearing worn

Jul 09, 2008 | 2003 GMC Yukon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...