Question about Suzuki Grand Vitara

2 Answers

I have a Suzuki Grand Vitar 1.9Litre Turbo Diesl. After 10 running the INJECTION WARNING LIGHT comes on. I have had local Suzi dealer check it out, clear code, but still comes back on after short time. Has anyone else had similar problem ???? Any input would be greatly appreciated.

Posted by on

  • 1 more comment 
  • krw50 Dec 11, 2009

    I will get the codes and post them tomorrow evening, thank you for noting my problem.

    kw

  • krw50 Dec 12, 2009

    Hi,

    I got the code from the workshop.



    code P0606



    is that of any assistance??



    thanking you again

    kw

  • krw50 Feb 14, 2010

    Problem all solved, thank you for your assistance

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,341 Answers

I you have had this code cleared and now it is back then you have a problem as the ECM has picked up an error.You need to go back for a diagnostic test and read the error code.Once you get this error code you will have an idea of what is wrong and where to start troubleshooting.Hope this helps.

Posted on Dec 12, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 19,396 Answers

Hi.

There are many different faults that can cause the engine warning light coming back.

To address the problem we will need to know what error code the dealer found after scanning your Vitara's ECU.

The code will tell us what kind of problem you are facing , and what the possible causes may be.

If the driveability is not affected, the error may be for example a bad connection to one of the O2 sensor, located on the exhaust system. This will cause a bigger emission levels and fuel consumption, but the car will still drive.

Try giving a call to the garage that did the code scanning, or scan again the ECU and write down the code, so that we can tell you what the problem can be.

Posted on Dec 11, 2009

  • Ginko
    Ginko Dec 11, 2009

    Ok, I will be waiting for your update.




    Thanks.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi , I have a 2010 1.9 DDIS vitara . There is a warning light on the dash( rectangular box with a zig zag line through it ) and the engine has lost power , no turbo boost. Any ideas?


(in what country ,we are USA are you)
direct diesel injection system.
our books (pro) cover are cars,not others.. so.... where are you.?
the glove box has operators guide, and every lamp is covered.
read that yet:?
we cant see it unless you post a photo of it,
words dont convey how things look well a tall,
scan it yet , any time engine looses power we
check engine oil level
the coolant.
then scan it. 1,2,3, bingo
or why not get the car serviced as most do.?

the warning lamps vary by, engine, transmission and country
and laws in each country, regulation them.
the glove box book matches all that, so dont loose it ,
if lost buy one and not be stuck like this.

Nov 17, 2016 | 2010 Suzuki Grand Vitara

1 Answer

Grand vitara engine warning light


Put seafoam for cleaning system go to auto zone they will tell you.

May 05, 2017 | 2006 Suzuki Grand Vitara

1 Answer

I fueled up my 2007 Grand Vitar Suzuki and now my check enging light is on


The check engine light can come on for many reasons. I would try tightening my gas cap first. If that doesnt work you can go to autozone or a local parts store and have them pull the code. Usually this is free.

Aug 15, 2011 | 2006 Suzuki Grand Vitara

1 Answer

My 2007 Suzuki Forenza engin light came on while driving. We check all oil levels and water and was fine. I disconnected the positive treminal on the battery and the light stayed out, just to light up...


Look back first on any unusual things that went on with the car. If the car is running differently it may just be loose sensors, inspect the cables and the vacuum hoses. Check for leaks or parts that may have come off.

In most cases it could be several issues and you need the codes to accurately identify the problem. Some shops would let you borrow their scanner to get the error codes if there are no Suzuki dealers in your area.

May 16, 2011 | 2007 Suzuki Forenza Sedan

1 Answer

I have a 2004 grand prix 3800 engine non turbo. Engine was eratic at cruise with rpms at 1200-2000. rpms would lope 2-300 rpms. I Changed air and fuel filter, and cleaned the throttle body. also checked...


i had a problem with all my lights coming on in my 2006 explore took it to dealer to find out that the battery was dying replaced it and they went away

Mar 26, 2011 | 2005 Pontiac Grand Prix

1 Answer

Glow plug symbol warning light???????


think its a turbo warning light ,and as this car is a 2008 model then its dealer only because the software is encrypted any attempt to read codes will activate the immobilisor ,goodbye you local general garage

Jan 17, 2010 | 2008 Saab 9-3

1 Answer

Do i need lock tool to change cam belt on a 03 grand vitara


I'd be first confirming whether you have a 1.6 litre Grand Vitara (petrol), or a 2 litre turbo diesel. The 2 litre petrol (straight 4 or V6) or 2.5 litre petrol engines are all chain drive.
If your engine is petrol then no lock tool is required (to hold the camshaft). Of course, there is a specific position that an engine should be rotated too before removing the belt from ANY engine.
If it's diesel, then although I'm unfamilar with that particular engine, the general requirement for diesel engines with high pressure injection pumps is "yes, you require a lock tool" to hold the injection pump pulley. As I think these are a common rail set-up, this requirement may not be necessary. Check with your Suzuki Dealer, or maybe someone else here will know more. A similar question may have already been asked and answered here too.

Jan 11, 2010 | 2003 Suzuki Grand Vitara

1 Answer

I have a diesel suzuki swift and have a warning light come on after a few miles the car runs ok and ive had the light reset but local dealer said it might be a regasification valve ive never heard of this...


that seems to be with the hight voltage system. try to replace the wires coming to the ignition plug and a barrel before them. I had the same problem on my old care and that helped me much. The computer usually shows the error with the catalyst system - this is due to the lack of the light on one of the ignition plugs.

Jun 15, 2009 | 2005 Suzuki Swift

3 Answers

Steering warning light on 2005 suzuki reno


Speed Sensitive Power Steering
(SSPS) Warning Light
If your vehicle has Speed Sensitive Power
Steering (SSPS), this warning light will
come on briefly when you turn the ignition
to ON as a check to show you the bulb is
working.
Then it should go out after a few seconds.
If the warning light does not come on, have
it fixed so it will be able to warn you if there
is a problem.
If the warning light stays on, or comes on
while you are driving, the SSPS system
may not be working. If this happens, see
your SUZUKI dealer for service.

Feb 16, 2009 | 2005 Suzuki Reno

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

83096 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...