Question about 1992 Dodge Caravan

1 Answer

I need to install a push button ignition on my 92 Dodge caravan, but I can't find the wiring diagram to the ignition switch so I can find out what wires I need for the button. Any answers

Posted by on

  • blackjackcal Dec 11, 2009

    I don't think I have enough wire on hand to run that much wire to do the job. that's why I was looking at the switch wires. don't get paid again till the first of jan. I do have 12 awg wire for the job though, 6 feet worth

  • blackjackcal Dec 12, 2009

    I got the problem taken care of. I appreciate wracefans24's advice, but I wanted it neat and clean and as little wire as possible. On the 92 dodge caravan, at the ignition board/switch, there is a wire at one end of the board and a yellow wire at the other end. I tacked a wire in with the red (hot 14 awg) and another wire tied into the yellow wire (starter 14 awg). I then ran both wires to a starter push button which I conveniently mounted into the plastic beneath the dash but above the fuse panel. Closed everything up, made sure there were no loose connections, turned the key and the van started right up. I hope this helps anyone else with a caravan looking at putting a push button ignition in.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,985 Answers

You don't need them,
run your hot wire directly from battery,and the from push button switch to starter solenoid,but you will still have to have the key turned on to run

Posted on Dec 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1970 dodge truck ignition switch wiring diagram


Ed, 1970 dodge truck ignition switch wiring diagram. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.sweptline.com/tech/70_awire.jpg
http://www.sweptline.com/tech/70wire.jpg
1970 dodge truck ignition switch wiring diagram Google Search

Aug 23, 2016 | Dodge Cars & Trucks

1 Answer

What are the color coded wires in ignition switch plug assigned to? I'm trying to install universal ignition and can't decide wires for new ignition. This is a 2002 Dodge Caravan.


Why would you install a universal ignition switch that has to be frankensteined to get it to work? The proper switch should be no more cost wise than a universal one and will exact fit with no adverse effects that may arise from butchering any wiring

Jan 20, 2016 | Dodge Cars & Trucks

1 Answer

Need a routing diagram for serpentine belt 92 dodge caravan le


http://www.2carpros.com/diagrams/dodge/caravan/1992

Apr 07, 2011 | 1992 Dodge Caravan

2 Answers

Trying to install a push button ignition need to know which two wires to run to the button, without having to spend hours tracing and guessing. A diagram showing the wires would be great.


Your switch has 4 terminals.

1. Red is the hot wire from the battery.
2. Dark Blue is the run wire. This wire powers PCM, and engine and well as all accessories when the key is on.
3. Yellow is the start wire. It powers the engine, ECU and starter circuit when the key is turned to start.
4. Last terminal is accessories. I don't know the color, but it will power the radio, blower, windows, mirrors, etc. when key is turned to ACC. Some diagrams of the switch are below. Please let me know if you have any questions.


jturcotte_142.gifjturcotte_143.gif

Nov 12, 2010 | 1996 Dodge Dakota

1 Answer

92 dodge caravan timing belt diagrams???


I have changed many of them.Any auto parts store should have this info!Also sometimes it comes with a new belt!

Mar 20, 2010 | 1992 Dodge Caravan

1 Answer

1998 Dodge Caravan locks automatically while


Do you know how to do automotive electrical testing with volt meter ? Do you know what a wiring diagrams is , how to use it to test electrical wiring ? One of the door switches could be the problem ! Find wiring diagrams here http://www.bbbind.com/free_tsb.html .

Door Locks Go Crazy 1
Door Locks Go Crazy 2
Door Locks Go Crazy 3


Apr 10, 2017 | 1995 Dodge Caravan

1 Answer

Need help with the wiring diagram for my 92 Dakota, has not brake lights or blinkers


www.wiring-diagram.com
You can get any wiring diagram for any vehicle. It will cost about $12 and it's well worth it. It will give you the complete diagram bumper to bumper.

Apr 29, 2009 | 1998 Dodge Dakota

1 Answer

Command start wiring diagram for a dodge caravan


Go to your local automotive store and get a Haynes or Chilton repair manual. Be careful installing it, it can cause major probs with the other wiring in your van.

Jan 22, 2009 | 2000 Dodge Caravan

Not finding what you are looking for?
1992 Dodge Caravan Logo

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

80637 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...