Question about 2004 Chevrolet Aveo

1 Answer

Installing new timing belt after old one failed and bent valves in head. Repairs to head being done, not sure of timing of cams /

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 540 Answers

I am a gm tech and I would actually recommend a new engine from wrecking yard. I have had two of these that had the head replaced and vibrated due to a slightly bent rod. If you decide to put it together, just go to your local dealer, and ask if you can borrow the special timing belt adjuster tool. The adjustor/tensioner is the water pump. I would replace it and the idler pulleys also I have had them fail as well. If they will loan you the tool, they should print a procedure for replacement out also, at least i do for my customers.

Posted on Dec 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

The timing belt is off and cam wont turn?


Bent valves, seized camshaft. You need to pull the head or can try to pull just the cam and try to see what the damage is

May 22, 2016 | Cars & Trucks

1 Answer

No spark I believe?


the valves can be open if the cam is still in the head, if you remove the cam and any of the valves are open they are probably bent, this can happen if the timing belt is out of time the pistons hit the valves, if that's the case have the valves replaced and check the heads for damage, the replace head and new timing belt, making sure the timing is correct

Oct 30, 2015 | 1999 Honda Civic

2 Answers

How to set camshaft timing


you should have bought a Chilton or Haynes manual. most cars and trucks are all different and have a set way to set them. if you broke the chain or belt and bent a valve. you will need to do expensive repairs pulling the heads to change valves. not sure what car you have or why you pulled the timing off. so I cant be sure what to tell you.

Mar 12, 2015 | Cars & Trucks

2 Answers

I have 2006 Dodge Stratus 4 cycl. It died on me while i was driving and wouldn't start back up. i had a mechanic check it out and he said it was the timing belt but he couldn't tell me for sure if...


The problem is that it depends on the mileage and the condition of the car and if it was kept up, the timing belt is what keeps the top and bottom of the motor in time, when the belt breaks the pistons come up and hit and bend the valves because the belt is not turning the cams to close the valves, most of the time there is valve damage, you can ask him to install a belt and then before putting everything back together to do a compression test, the test will show if there are bent valves, sometimes people get lucky and dont bent valves because the valves closed but they were at a light or going slow, this makes it so the engine isnt spinning so fast and valves close before damage is done,If you have over 100,000 miles maybe its time for another car, the thing is whats next, the transmissions in these cars are known for going bad also.i just did a little research and found that this car has daul overhead cams which makes the valve bending more definite, i would say for sure theres valve damage, this can be fixxed but the head would have to be removed and sent to a machine shop for new valves and a valve job, this could cost about $600.00 then the labor for the tech to remove the head and install it and the new belt and plus parts, i would say about $2000.00. this is something you need to think about. if the car is in great shape and you did all the maintinace to it and dont need other repairs like brakes, tuneup or tire and the cars body and inside are great and mileage is around 80,0000 then maybe fix it, otherwise replace it, hope this helps.

Mar 24, 2011 | Dodge Stratus Cars & Trucks

3 Answers

1999 daewoo leganza timing belt keeps going out.


you could possible have a bad head maybe bent valves or push rods

Jul 29, 2010 | 1999 Daewoo Leganza

2 Answers

Cam belt broke while driving at 30 mph tried to align camshaft cannot turn it, does this mean pushrods bent


High probability here. You may need to strip down part of the engine to find out what has been damaged here.Hope this helps.

Jun 09, 2010 | 2000 Ford Focus

2 Answers

Timing belt snapped


hi from uk the cambelt timing marks for accent 1.3/1.5 petrol are as follows= the cam cog has a hole drilling between the outer toothed and the central securing bolt this hole at TDC number 1 cyl is at top central and lines up with a V cut in the cyl head at rear of cog ? the crank cog at TDC number 1 cyl is a pop mark on both the cog and on thefront face of engine quite noticable ! these line up and are at approx 12 -30 pm when viewed fit new belt from crankcog in anticlockwise ie crank then cam then tensioner HOWEVER! if you are considering just replacing belt and tensioner ? be warned this engine is an interferance engine that is to say if belt fails whilst driving there may/will most probably be damage to the valves (bent) due to contact with pistons so would advise caution and suggest compression test all cyls after fitting new belt and tensioner and before rebuild completely once valves have bent they will not contact pistons again but you will have serious missfire/s and probably back fire up inlet manifold coupled with failing to start if engine is high milage ? consider removal of cyl head and check? de coke and replace damaged or best all valves then engine will have improved performance and more milesin future hope this helps

Nov 28, 2009 | 2001 Hyundai Accent

2 Answers

Motor g16A 16V, Borken cam belt, has it bent the valves ?


Hi, there is a posibility that it may have bent valves, install new belt ,if your engine misfire or dont start at all ,there are bent valves, be sure to aling the timing marks ,perfect.. good luck

Aug 24, 2008 | 1990 Suzuki Sidekick

2 Answers

Timeing belt


IF YOUR TIMING BELT BROKE OFF BEFORE YOU CHANGED THE TIMING BELT DO YOU HAVE TO TAKE THE COVER OFF OF THE HEAD VALVE LOOK AT THE CAMS AND YOU WILL SEE THAT THE VALVES ARE BENT IF THE CAM IS NOT TOUCHING THE VALVES ARE BENT BEFORE YOU ALINE THE CAM GEARS YOU HAVE TO PUT THE CRANK SHAFT GEAR IT HAS A MARK AT THE BOTTOM OF THE OIL PEN MAKE SURE THAT WHEN YOU GET IT ALL SET UP RETURN THE GEAR TO THE MARK ON PULLY ALSO THE TIMING MARKS ON THE CAMS HAS TO MARKS ON THE COVER THE LEFT CAM GOES AT 12:00 THE RIGHT CAM MAKE SURE THE EXHAUST LINE LINES UP AT 12:00 OTHERWISE IT WONT START BECAUSE YOU DONT HAVE NO COMPRESSION I HOPE THIS IS HELPFUL FOR ANYBODY THAT NEEDS TO REPAIR THE ENGINE



ALCANTARAMONICO@YAHOO.COM

May 16, 2008 | 2000 Daewoo Leganza

Not finding what you are looking for?
2004 Chevrolet Aveo Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...