Question about 2002 Daewoo Lanos

1 Answer

After replacing timing belt, now it develope a

After replacing timing belt, now it develope a misfiring at idle,i doble check the timing,andhave the spark plugs and wiring replaced,it runs greatat high speed,did not replace the coil pack,we run the scanner to it and show a misfiring on cylinder num. 4, what do you recomend. victor

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Check number four spark plug. The gap could be off causing it to mis-fire.

Posted on Dec 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced broken t-belts on 03 eclispe, 2.4 ran great then developes miss, sets 5 mins runs great agian, first was only random misfire code , now added crank sensor fault code...


check crank sensor wiring connection
as it runs great there is no belt or timing problem but wiring and connections may not be correct

Apr 13, 2018 | Cars & Trucks

2 Answers

2002 rodeo, starts and when put on gear stalls


Automatic transmission ??
Check engine lamp illuminated ??
Cold engine idle speed ??
Warm engine idle speed ??
IAC (Idle air control) system operation ??

If you need further help, reach me via phone at https://www.6ya.com/expert/ralph_2f0886b7d6af32ce

May 28, 2015 | 2002 Isuzu Rodeo

1 Answer

Multiple misfire code


Hi
rough erratic idle, stalls, loss of power, multi cylinders misfire.
1: you have to check the timing belt for correct timing.
2: if timing is OK check the EGR valve, could be stuck open.
3: check for vacuum leak
Good Luck

Apr 21, 2014 | Cars & Trucks

2 Answers

Multiple misfires random misfires


Do a Cylinder Leak Down Test --to see if the valve are shot & leaking

You can also do an electronic cylinder contribution test

Then if the all seal, check the timing belt

After that check for vacuum leaks with evap smoke machine

Mar 28, 2014 | 2000 Honda Civic

3 Answers

2003 cadillac cts 3.2 liter..rough idle, scan tool shows misfire on bank 1, cylinders 1,3,&5. only at idle, scan tool also showed a cam postion sensor code. cam position sensor changed. no change in...


Did you ever find a solution to this? I am having the same issue on 2,4,6. I have replaced the coils. checked the intake for vacuum leaks. I am lost here let me know if you find anything and I will do the same.

Jan 08, 2011 | 2003 Cadillac CTS

1 Answer

Check engine light flashing and car idling low. 2003 Passat V6 4Motion. Recently replaced the timing belt. Was told this is unrelated. Need to replace Cam Belt for cylinders 4,5, and 6


First things first. The check engine light is blinking because the engine is misfiring to a point that could damage the catalytic converter. If cylinder 4 5 & 6 are all misfiring i would check the engine timing belt for proper installation. These are the cylinders for the left bank of the engine. If the belt has jumped or was installed wrong this would explain the misfires. Unfortunately this is an interference motor which means there is a high probability if the belt is on wrong, the engine valves mat be damaged. I would perform a compression test on those cylinders to verify the belt condition. Hope this helps.

Dec 21, 2010 | 2003 Volkswagen Passat

1 Answer

2003 GMC Sierra Has recently developed rough idle/lope at idle which sometimes goes away. Runs fine otherwise. Scan codes-Lean condition bank1 and bank2. Random misfires on all cylinders. Fuel pressure...


You never replace anything, on a Wishing,Hoping,Pushing,Poking,diagnostic approach

You learn the vehicles Systems,Test,then Replace,if you have a failed component.

Work on the Misfire Issues.
Then you lean O2 Codes will go away.

Not a the plugs.

Think lean---Vacuum leaks,EGR Valve leak,EVAP System leaks,anything with a hose that lets air into the intake system.
Exhaust System leaks,near sensors

Nov 24, 2010 | 2003 GMC Sierra 1500

1 Answer

After timing belt fitted developed a slight misfire mostly noticeable at idle speed


make sure belt was align correctly or may have bad plug wires or plug start there good luck.

Nov 18, 2009 | 1996 Volkswagen Passat

2 Answers

Check Engine and noisy belts in the hood


your car has a timing chain with a hydraulic tensioner. is it just an unstable idle ( revs up and down) or does the engine have a slight misfire?

Jul 04, 2008 | 2003 Acura RSX

Not finding what you are looking for?

Open Questions:

See all 2002 Daewoo Lanos Questions

2002 Daewoo Lanos Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

80339 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...