Question about 1992 Geo Tracker

2 Answers

Gas guage stop working where is the fuse for it?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 16 Answers

These trackers are notorious for the wiring to the sending unit on the top of the fuel tank rotting. My bet is this is your problem and not a fuse. If you do drop your tank and your luck is anything like mine :( you will see there is allot more in need of replacing. I replaced my tank and sending unit due to all the rust. Somewhat costly but in the long run it was worth it. you may be able to just replace the sending unit by removing the screws on the top of the tank and dropping in a new one but mine was so far gone I could not get the screws out. If your wires to your sending unit are rotted I would bet your wires to the fuel pump are not in very god shape either.

Posted on Dec 21, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 67 Answers

Fuel tank have to come down

Posted on Dec 10, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 55 Answers

SOURCE: the gas guage on my 2003 toyota sequoia stopped working

I would check the fuse first, and if that isnt bad, there is a float in the gas tank that sends a message to the gauge to how much gas is in the tank

Posted on Dec 12, 2008

localwonder
  • 6784 Answers

SOURCE: instrument guages stopped working

Hi, this could be as simple as a blown fuse. It could also be because of failed general parts. i would first check the fuse box to make sure all the fuses are good then, i would check the wire connections on the back of each gauge to see if they may have become lose or separated form the housing.

Posted on Feb 25, 2009

honeymokey
  • 3113 Answers

SOURCE: Gas guage, Temperture gauge and RPM guage stopped

Send cluster out to be checked and or repaired to Model Electronics.

Posted on Jul 06, 2009

  • 135 Answers

SOURCE: Dash guages quit working. Gas, temp, tach and

Try disconnecting battery for couple minutes and see if it starts working again I have done that in the past

Posted on Aug 05, 2009

  • 491 Answers

SOURCE: 1994 Toyota Tercel blinkers and air stopped working

Check the fuse/connectors at the battery post.

Posted on Aug 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where can I find a fuse for the gas gage on a 2004 Chrysler T&C


The gas guage does not have its own fuse but instead gets its power from the "integrated power module" that handles power delivery to the entire instrament cluster and beyond. If the guage is in-op,[doesnt work] then you will need to have a few "hands-on tests run to verify if the sending unit in the tank[fuel pump module] is functional or if this problem lyes else-where, wiring problem, bad ground,ect,ect.. One hint would be if the low fuel level l;ight still functions without the fuel guage working,then your problem is NOT in the tank and very likely is in your dash-electrical or faulty guage.
8w-40-2 106001316
8w-40-2

Jan 10, 2011 | Chrysler Town & Country Cars & Trucks

1 Answer

Dashboard dials (gas guage, speedometer) dont work.


sounds like the main fuse has blew which is under the hood

Jun 27, 2010 | 1999 Chrysler Sebring

1 Answer

Speedometer, gas guage, tack all quit working.


Sounds like you have blown a fuse check your fuse box and replace any fuses you find. Hope that helps

Oct 05, 2009 | 1999 GMC Sierra

1 Answer

1994 Toyota Tercel blinkers and air stopped working


Check the fuse/connectors at the battery post.

Aug 17, 2009 | 1994 Toyota Tercel

1 Answer

1999 blazer guages not working


It sounds like the wire harness in the back of the instument cluster has gone lose. Check the wire harness. Good luck

Apr 06, 2009 | 1999 Chevrolet Blazer

2 Answers

Instrument guages stopped working


Hi, this could be as simple as a blown fuse. It could also be because of failed general parts. i would first check the fuse box to make sure all the fuses are good then, i would check the wire connections on the back of each gauge to see if they may have become lose or separated form the housing.

Feb 25, 2009 | 1997 Honda Accord

1 Answer

The gas guage on my 2003 toyota sequoia stopped working


I would check the fuse first, and if that isnt bad, there is a float in the gas tank that sends a message to the gauge to how much gas is in the tank

Dec 11, 2008 | 2003 Toyota Sequoia

1 Answer

Guages


check the fuse for gauges first usually it is just that

Jul 23, 2008 | 1999 Dodge Grand Caravan

Not finding what you are looking for?
1992 Geo Tracker Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...