Question about 2002 Pontiac Sunfire

2 Answers

Where is the crank shaft positioning sensor located on a 2002 sunfire with a 2.2 ecotec

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Pontiac Master
  • 599 Answers

The crank position sensor is located to the back of the engine to the left of the oil filter, it is right next to the oil filter on the back side of the engine. hope this helps. Please rate my fix as i strive to be the best. need more help, get back to me Thanks Ray

Posted on Dec 10, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The crank shaft positioning sensor on a 2002 sunfire with a 2.2 ecotec, is located on the front of the engine next to your transmission you will have to remove the starter to get to it, as it is right behind the starter and you won't even see it till you remove the starter

Posted on Feb 05, 2012

  • jeffbarber20
    jeffbarber20 Feb 05, 2012

    this guy was right it was on the front right behind the starter

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is crank shaft sensor location on 95 lexus sc300 please help


images for Where is crankshaft sensor location on 95 ...

eplaced engine on '97 SC300 now new engine does not have Crank ...

www.clublexus.com/.../633233-replaced-engine-on-97-sc300-now-new-...
May 4, 2012 - Location: arizona. Posts: 3 ... apparently 95-97s had an additional crank sensor. .... 1995 Lexus SC300 5spd Na-T ( TT Ecu Mod + a few others) 2jzge position sensor??
Nov 2, 2011
SC400 Crank Shaft Position Sensor. WHERE?????
Oct 11, 2011
SC300 No Spark
Oct 2, 2010
What happens if the Camshaft Position Sensor goes bad?
Jun 18, 2009
More results from www.clublexus.com

Lexus Crank Position Sensor ' LS400 SC300 ES300 GS300 ...

www.partsgeek.com > Crank Position Sensor > Lexus Parts & Accessories
Products 1 - 10 of 68 - 95 1995 Lexus LS400 Crank Position Sensor Denso NLA 7/13 ... 96 1996 Lexus SC300 Crank Position Sensor Denso Includes Pigtail.

Jan 27, 2016 | Lexus Cars & Trucks

1 Answer

Crank shaft position sensor code. Where is the crank shaft position sensor located?


The crankshaft sensor is located just above the the oil filter, which is by the front of the engine, by the firewall. I reached it from underneath the car. There is one bolt holding it in place.

Jul 15, 2011 | 2002 Chrysler PT Cruiser

1 Answer

WHERE IS THE CRANK SHAFT SENSOR LOCATED


The 2002 Santa Fe came with three (3) possible powertrains (engines). The 4 cylinder, and two different V6 engines - i.e. 2.4L 4 cylinder, the 2.7L V6 and the 3.5L V6.

The crankshaft position sensor on the 4 cylinder and the 3.5L V6 are in the same place - Front Crank Shaft behind the pully (behind the timing belt cover.

On the 2.7L V6, the Cranshaft Position Sensor is located in the engine block (Left Hand Side)
near the flywheel (adjacent to the LH (Bank 2) exhaust manifold.

Note: Left Hand Side means the radiator side (front) Bank 1 is the firewall side.

Jun 30, 2011 | 2002 Hyundai Santa Fe

1 Answer

Need to know where the crank shaft sensor is located.


The Crankshaft Position Sensor is located under hood, center, rear engine area, mounted onpassenger side rear of cylinder head.

9_20_2011_5_58_25_pm.jpg

Fig. 2: View of the Crankshaft Position Sensor (CKP) location-2.2L engines


9_20_2011_5_58_48_pm.jpg

Fig. 3: The Crankshaft Position (CKP) sensor location-2.3L/2.4L engines


Hope this helps (remember to rate this free answer).

Mar 24, 2011 | 1997 Pontiac Sunfire

1 Answer

My 98 sunfire starts then stalls after 2 minutes then every time i start it it stalls sooner i replaced the fuel pump and filter no codes are showing any ideas


This is most likely your crank position sensor.... it sits behind your harmonic balancer and tells the PCM what position the crank shaft is at at all times. These sensors aare around 30 dollars at a local parts shop but you will need a pulley puller and a good impact wrench to remove the balancer

Feb 06, 2011 | 1998 Pontiac Sunfire

2 Answers

My 97 sunfire has a bad cranck shaft sensor. where is that located? would it also make the car not start?


Yes it would and will make the car not start. Your crank sensor is located behind your harmonic balancer, which is the large pulley that turns all the belts. THe one that is coming off the crank shaft.

Apr 10, 2010 | 1997 Pontiac Sunfire

2 Answers

Does my 2003 pontiac sunfire ecotec motor have a cam sensor? Where is it? If it starts as soon as u give it gas it cuts out. I've replaced: fuel pump, fuel filter, coil pk, spark plugs, crank sensor,...


there is still more to check. like the mass air flow sensor, the whole fuel line cleanout, and if its an auto it does have a camshaft sensor. its located into the transmission.

Jan 04, 2010 | 2003 Pontiac Sunfire

1 Answer

2002 grand am ecotec Rpm bounce 400-900 when engine is cold


Try and clean the throttle body. Carbon will gum up on the blade and the vaccume passages, which will cause a surge and stall.

Oct 28, 2009 | 2002 Pontiac Grand Am

2 Answers

CRANK SHAFT POSITION SENSOR 20002 NISSAN ALTIMA


1st, Nissan had a recall on Crank position sensors for 2002-2006 Altima's. Check with you dealer before you go doing any repairs. You may discover you can get your car repaired at no charge.
NHTSA Campaign ID number :O7V527000
Symptom: Erratic behavior. Stalling and no starts and very difficult to diagnose due to the time frame in which the component actually malfunctions. The warranty should not be limited to the original owner.
I would also need more specifics as to which engine you have so I might assist you in where the location of the sensor is. The Altima had a 4 and a 6 cyl engine offered that year.

Dec 18, 2008 | 2005 Nissan Altima

Not finding what you are looking for?
2002 Pontiac Sunfire Logo

1,393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...