Question about 1990 Toyota Pickup

1 Answer

How much gear oil does a transfer case hold - 1990 Toyota Pickup

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 563 Answers

1. Park the truck on a level ground.
2. Remove the drain plug on the side of the transfer- case. When the gear-oil starts to flow down from that side drain-plug, the correct amount of gear-oil is reached.
3. Replace the side-drain plug, and torque to 18-foot pounds.

Posted on Dec 11, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 599 Answers

SOURCE: what type oil do I use in a 1991 k1500 chevy

you need dexron 2

Posted on Nov 11, 2009

  • 333 Answers

SOURCE: Gear oil weights

You can get this gear oil at any auto store. they will tell you which oil should be proper for your vehicle. I hope this helps. Don't forget to rate this answer. thanks.

Posted on Feb 11, 2009

  • 7 Answers

SOURCE: Transfer Case gear oil change

If you use the vehicle for towing or drive in very cold conditions you should do it every 30K miles. Ordinarily you should change it every 60K miles. If I recall this is what Toyota recommends. I personally would recommend doing it every 30k. The Belray is good so I would stick with it .

Posted on Jul 20, 2009

  • 7353 Answers

SOURCE: Transfer case grinding

its hard to believe 2 trucks with same noise. you really need to verify where noise is from. it could be the trans

Posted on Oct 18, 2009

emissionwiz
  • 81400 Answers

SOURCE: noisy transfer case gears ? chain?

if the nosie is comming from the case then the chain is slack from wear, u will need it rebuilt.

Posted on Feb 25, 2010

Testimonial: "noisy chain, that is what i thought , thank you"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Holden Rodeo 4x4 petrol 2001 V6 what is the lubricant quantities for the diffs, gear box & transfer case. Also what weights of oil


manual transmission --- 80w-90 for the gearbox and transfer case
diff is 80-90 oep if a straight diff and different if a limited slip diff gear box is around the 2.5 ltrs as is the diff each
LiSiD oil can be used in LiSiD diffs and straight diffs but straight oil cannot be used in lisid diffs
the transfer case uses the same as the box but the quantity you will have to check in the lubrication section of the user manual
many user manuals recommend a lighter straight oil for transfer cases and boxes ( 30 straight oil) but I find that the light oil promotes bearing wear and gear problems as the oil squeezes out under load

Sep 10, 2016 | Holden Cars & Trucks

1 Answer

Whine in transfer case


proper oil in transfer case ? most transfer cases have a separate oil reservoir, heavy duty off roading sometimes makes a hole in oil seals and oil leaks out , I allways wash off all my oil seals surfaces after a visit to the MUD PIT saves me a ton on fixing seals

Jan 07, 2016 | Cars & Trucks

3 Answers

Where do i find my transfer case and what fluid does it use


1. Be sure to run your car (in 4WD) for about 5-10 minutes or so to warm the oil up and be sure to park on a level ground.First we need to gather our materials. This is what I used for my oil change:Initial expenses
  • Oil Catcher - $10 at Pep Boys
  • Fluid Pump - $5 at Pep Boys
  • 24mm wrench or ratchet (assumed ownership)
  • 12mm? and 14mm? sockets to remove skidplate
Transfer Case Change Expenses
  • 3 Qt 75W90 Gear Oil - $21
  • (I used Redline from myoilshop.com)
tcase1-nggid03733-ngg0dyn-320x240x100-00f0w010c010r110f110r010t010.jpg 2. Locate the Transfer Case.
Remove the Fill Hole plug first, then place your oil catcher in position, and remove the drain hole plug.
While the oil drains, clean off the drain plug.
tcase2-nggid03734-ngg0dyn-320x240x100-00f0w010c010r110f110r010t010.jpg
3. When finished draining, replace the drain plug, and proceed to pump the fluid into the fill hole.
I filled until the fluid overran, but you can check the fluid by sticking a pinky into the hold and checking the level.
Replace the fill hole plug, and done.
tcase3-nggid03735-ngg0dyn-320x240x100-00f0w010c010r110f110r010t010.jpg

Oct 10, 2014 | 2000 Mitsubishi Montero Sport

1 Answer

2001 ford excursion 4x4 troubleshooting


the transfer case shifter linkage may be loose or binding. Check the shift fork for signs of cracks or wear.
Damaged internal gears or viscous coupler prevent the transfer case from shifting into "4-low" or "4-high" drives.
and in evry 15000 miles need to change oil.

Jan 28, 2012 | 2001 Ford Excursion

1 Answer

Service four wheel drive light on,cant shift into 4wd cold only ,below 45F,drive awahile resatrt the truck it works fine,warm days no problems .


Vehicles: 2002 Chevrolet Trailblazer 4WD 4.2L SFI DOHC 6-cylinder

Your front 4WD Transfer case is low on Gear Oil.
On warm days, the Gear Oil expands slightly, and is less viscous, so the "Service 4WD" light stays off. On colder days/mornings the story changes.

The following paragraph has info applying to the manual differential only:
The 2002 Trailblazer (the first year Chevy made the Trailblazer) has a Front Differential using 1.11 (that's 1 and 1/9th) Quarts Gear Oil, and a Rear Differential with a capacity of 2.29 (thats 2 and 2/7ths) Quarts Gear Oil.
The Gear Oil needed is GM Part No.12345349 or GM Part No.1052931 (they're identical), also known as "GM Synchromesh"(R), which is a type of GLS (Gear Lubricant, Special), also known as "Manual Synchromesh Transmission Fluid 5W30". A synthetic version of which sells for $12.70/qt (USD) at
http://www.amsoil.com/storefront/mtf.aspx

This is not to be confused with 5W30 motor oil (which can be had for $3.00/qt (USD)).

The 2002 Trailblazer 4WD Transfer Case (NV126 Transfer Case) capacity is 0.8 Liters of GM Part No.12378508 (US), also known as "GM Auto Trak II"(R).
Note that one Quart (US) = 0.946 Liter, so 0.8 Liter = 27.06 ounces.

Red Line sells something that they say replaces both GM Synchromesh and GM Auto-Trak II for $12.14/Qt and $44.55/Gal (US) at
http://www.shopwiki.com/Red-Line-MTL-70W80-GL~4-Gear-Oil-%281-Quart%29

13 Manufacturer Recalls apply to the 2002 Chevrolet Trailblazer (model year 2002 was the first year Chevy offered the Trailblazer), and two recalls pertain to the 4WD Transfer Case. Note that one of the recalls applies to only 895 units, so your vehicle is unlikely to be affected by this Transfer Case recall.

2002 Trailblazer Recall ==========================
OCT 17, 2001 ' Recall ID# 54221

Recall Reason POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE)
Recall Date OCT 17, 2001
Model Affected TRAILBLAZER
Potential Units Affected 78004

Recall Summary
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES EQUIPPED WITH 4-WHEEL DRIVE. THE CALIBRATION OF THE TRANSFER CASE CONTROL MODULE COULD CAUSE INSUFFICIENT HIGH SPEED GEAR ENGAGEMENT.

Consequence
IF THE GEAR IS NOT ENGAGED, THE VEHICLE CAN ROLL WHEN THE TRANSMISSION IS IN "PARK" AND A CRASH COULD RESULT WITHOUT WARNING.

Remedy
DEALERS WILL UPDATE THE TRANSFER CASE CONTROL MODULE CALIBRATION TO INCREASE GEAR ENGAGEMENT. OWNER NOTIFICATION BEGAN NOVEMBER 6, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-800-462-8782.

Notes
GENERAL MOTORS CORP. 01064/01065

2002 Trailblazer Recall ============================
SEP 05, 2001 ' Recall ID# 26006

Recall Reason POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE)
Recall Date SEP 05, 2001
Model Affected TRAILBLAZER
Potential Units Affected 895

Recall Summary
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES (4 WHEEL-DRIVE). SOME OF THESE VEHICLES WERE BUILT WITH A RANGE SHIFT COLLAR IN THE TRANSMISSION TRANSFER CASE THAT CONTAINS CRACKS.

Consequence
THIS CONDITION COULD RESULT IN A COMPLETE FRACTURE OF THE RANGE SHIFT COLLAR AND SUBSEQUENT LOSS OF VEHICLE FORWARD AND REVERSE GEARS, AND THE INABILITY TO MAINTAIN "PARK" POSITION. THIS INCREASES THE RISK OF A VEHICLE CRASH RESULTING FROM UNINTENDED MOVEMENT OF A PARKED VEHICLE.

Remedy
DEALERS WILL REPLACE THE TRANSFER CASES AND UPDATE THE CONTROL MODULE CALIBRATION. OWNER NOTIFICATION BEGAN SEPTEMBER 6, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-800-462-8782.

Notes
GENERAL MOTORS CORP. 01061


Read about all (13) 2002 Chevy Trailblazer recalls at:
http://www.internetautoguide.com/10-12-2002-16-1287/2002-chevrolet-trailblazer-recalls.html

Dec 05, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

What kind of oil goes in the transfer case


It depends on your transfer case

spicer 18 and 20 takes 80W-90 gear oil
dana 300 takes 85W-90 gear oil.

I personally don't think it would matter either way if you put 85 or 80. They both lube well. Thats my opinion.

Mar 08, 2011 | 1985 Jeep CJ7

1 Answer

What is the capacity of the transfer case and exactly what fluid do i use


GM Full-Size Trucks 1980-1987 Repair Guide

Transfer Case - FLUID RECOMMENDATIONS
The type of lubricant used in the transfer case varies with model year and type of transfer case. Refer to the list below for the type that applies to your truck.

1980
Conventional transfer cases require SAE 80W or SAE 80W-90 GL-5 gear lubricant.
Full time systems use SAE 10W-30 or 10W-40 engine oil.
1981
Conventional transfer cases require DEXRON®II transmission fluid.
1982-85
All transfer cases require DEXRON®II transmission fluid.
1986-87
All transfer cases except the K30/35 series require DEXRON®II transmission fluid.

For fluid recommendations for the K30/35 transfer cases refer to the owner's manual.
LEVEL CHECKS

fb6e8b4.jpg
Fig. Model 208 Transfer Case

Check the four wheel drive transfer case lubricant level every 4 months or 6,000 miles.
  1. With the truck parked on a level surface and the parking brake firmly applied, remove the filler plug from the rear of the transfer case (behind the transmission). Be careful not to take out the drain plug at the bottom.
  2. If lubricant trickles out, there is enough. If not, carefully insert a finger and check that the level is up to the edge of the hole, EXCEPT in full time four wheel drive cases should be 1 /2 in. below the hole.
Lubricant may be added, if necessary, with a funnel and tube, or a squeeze bulb.



DRAIN AND REFILL
Part Time Systems
No intervals are specified for changing transfer case lubricant, but it is a good idea for trucks that are worked hard or driven in deep water.
  1. With the transfer case warmed up, park on a level surface and apply the parking brake.
  2. Slide a pan of a least 6 pts. capacity under the case drain plug.
  3. Remove the filler plug from the rear of the transfer case (behind the transmission). Remove the drain plug from the bottom.
  4. Wipe the area clean and replace the drain plug.
  5. Add lubricant with a suction gun or squeeze bulb. Conventional transfer cases require SAE 80W-90 GL-5 Gear Lubricant.
  6. When the lubricant level is up to the bottom of the filler hole, replace the plug.
Full Time Four Wheel Drive
The full time system requires oil changes at regular intervals, according to the amount and type of work done by the unit. Trucks used for normal on-off road work should have the transfer case oil changed at 24,000 mile intervals. When used for heavy duty work, trailer towing, snowplowing, and the like, the interval should be halved to 12,000 miles. If the truck is exposed to extremely dusty or muddy conditions, the oil should be changed at 1,000 mile intervals.
The transfer case oil must be hot before changing. Drive the truck until the engine has reached normal operating temperature, and park on a level surface.
  1. Slide a pan of at least 8 pts. capacity under the case drain plug.
  2. Remove the filler plug.
  3. Remove the lowest bolt from the front output shaft rear bearing retainer cover, and allow the lubricant to drain. Be careful; the oil will be hot. There may be a drain plug. If so, remove that instead.
  4. Remove the six bolts on the left (driver's) side of the case which secure to P.T.O. (power take-off) cover. Remove this cover and allow the lubricant to drain out.
  5. Remove the speedometer driven gear from the upper left rear corner of the case.
  6. Use a suction gun to remove as much lubricant as possible from the case cover location and the speedometer gear location.
  7. Install the speedometer driven gear, the P.T.O. cover, and the lowest bolt or drain plug.
  8. Add approximately seven pints of oil through the filler plug opening. The proper oil to use is 10W-30 or 10W-40 engine oil.
  9. Check the fluid level and add sufficient oil to raise the level to 1 /2 in. below the filler plug opening. Replace the plug, and wipe the surfaces of the case and skid plate to remove any excess oil. Drive the truck and check for leaks.

I really hope help ypou woth this (remember rated this help) Good luck.

Oct 16, 2009 | 1983 Chevrolet Silverado

3 Answers

What kind of oil do I put into the transfer case? Is that why the computer keeps saying check 4 wheel drive?


no, DO NOT use gear oil. The transfer case uses the same type of automatic transmission fluid that the transmission uses. Is the display saying "service 4x4 switch"? If so it is common and the 4WD indicator light switch is bad and needs replaced. It's only purpose is to tell the driver info center what 4 wheel drive mode the transfer case is in. This switch will not affect the function of the 4 wheel drive. The correct fluid for the transfer case is +4 automatic transmission fluid.

Jul 18, 2009 | 1993 Jeep Grand Cherokee

2 Answers

What;s the oil capacity for a 2002 chevy trailblazer 4.2 6 cyl?


Here are the Fluid CAPACITIES & MORE:
Engine, with filter..........4.6 quarts[1]
Cooling System, Initial Fill..........12.0 quarts
Automatic Transmission, Total Fill
4 speed 4L60, 60E..........11.0 quarts
Manual Transmission, NV1500..........5.7 pints
Manual Transmission, NV3500..........4.2 pints
Differential, with 8.6 ring gear Rear..........4.0 pints
Differential, with 7.25 ring gear Front..........2.5 pints[2]
Differential, with 8.25 ring gear Front..........4.2 pints[2]
Differential, with 9.25 ring gear Front..........5.9 pints[2]
Differential, Front..........2.5 pints
Differential, Rear..........4.0 pints
Transfer Case,BW4472..........2.5 pints
Transfer Case,NV136/236/246..........4.0 pints
Transfer Case,NP207..........4.6 pints
Transfer Case,NP231, NP233..........2.3 pints[3]
Transfer Case,NV231/233..........2.1 pints[3]
1. After refill check oil level.
2. Do not use synthetic lubricant in axles using RTV sealant.
Synthetic lubricant will chemically atack RTV sealant.
3. Identification: check tag on case.

Apr 13, 2009 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
1990 Toyota Pickup Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

81342 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...