Question about 2002 Buick LeSabre

Open Question

REMOVE HEADLIGHT SWITCH 2002 LESABRE - 2002 Buick LeSabre

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
honeymokey
  • 3113 Answers

SOURCE: How do your remove the switch for the cruise 2002 LeSabre

Pull

Posted on Jul 06, 2009

Ad
  • 9 Answers

SOURCE: 2001 Buick LeSabre. How to remove headlight

the bolts you are looking to remove are located on the top of the light housing. It only takes 2 of them to remove the housing. One is about 6 to 8 inches long, and the other one is much shorter than that. Just unscrew and remove them, and pull the housing straight out.

Posted on Aug 31, 2009

Testimonial: "Thanks a bunch!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change headlight switch on 2002 lesabre


Its very easy.
Open the driver side door. You pull the decorative panel to the left of the steering column, from the left edge towards you, and it pops out. No screws, just pull.
Once you've done that, simply unscrew the switch from the panel. Then pull the plug from the part and replace it with the new one. Screw it back onto the panel, push the panel in and you're on your way.

Nov 06, 2013 | 2000 Buick LeSabre

Tip

How To Replace Change Headlight and Bulb Buick Lesabre 2000-05 1AAuto.com


How To Replace Change Headlight and Bulb Buick Lesabre 2000-05 1AAuto.com

on May 02, 2012 | 2005 Buick LeSabre

1 Answer

Why won't my headlights work on my 1990 buick lesabre?


On a 1990 Buick you have a fuseable link between the headlight switch and the battery.
Do you have power in and out of the headlight switch and the dimmer switch ?

Jan 30, 2013 | 2000 Buick LeSabre

1 Answer

None of the dials or lights on my instrument panel work on my 2002 buick lasabre


Do you have them turned off at the dash light dimmer control near the headlight switch?

Oct 04, 2012 | 2002 Buick LeSabre

1 Answer

How to remove condinsation from inside of headlight on 2002 buick


sounds like a smart remark, but drill a small hole in the lower corner of lens. the seal around the light starts leaking and allows moisture into the light. the other option is to replace the assembly.

Jul 20, 2011 | 2002 Buick LeSabre

1 Answer

Changing passenger side low beam headlight bulb for 2001 Buick LeSabre Custom


there is very little room to gain access to the bulb from behind the headlight assembly.if you remove the plug for the headlight and then slide your hands down on either side of the bulb.there is a lock ring that you must remove(unlock)first.then pull the bulb out and install the new bulb and reassemble in reverse order.NOTE don`t touch the bulb glass with your hands or it can burn out prematurely from the oil on your skin.

Mar 15, 2011 | 2002 Buick LeSabre

1 Answer

Remove driver side headlight assy to replace side marker light


There are two screws holding the headlight in. The screws are just above the headlight. After removing the screws you'll need to carefully pull straight out on the headlight assembly. There's a ball/socket type joint just behind the headlight. This joint needs separated for the assembly to come all the way ouit. Reaching and replacing the side light bulb requires a bit of arm twisting.
Reverse the order to re-install the headlight.

Sep 26, 2009 | 2002 Buick LeSabre

1 Answer

How do you change the low beam headlight bulb?


You will have to remove the headlight assembly to whichever side is burneed out. It is a halogen bulb that gets replaced not the entire assembly. Careful not to touch the new bulb with your fingers as this will cause premature failure of the bulb.

Aug 15, 2009 | 2002 Buick LeSabre

Not finding what you are looking for?
2002 Buick LeSabre Logo

Related Topics:

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

Marvin
Marvin

Level 3 Expert

83081 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...