Question about 2000 Daewoo Leganza

1 Answer

Have had to put 5 new front ends put in inthe last 5 years. (Daewoo, Leganza ) How is this possible ? It's obviously defedtive but there has been no recalls.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 83 Answers

Do you live in Michigan by chance? I usualy get about 30,000 miles out of a set of Moog ball joints and tie rod ends in my Dakota up here. My suggestion is this, if you're not using Moog replacement parts, try those next. I'd be willing to bet the repair shop you're going to is using the cheapest thing they can find, as most do. Try Moog, should hold up a little better, even better than OEM.

Posted on Dec 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing belt on Daewoo 01 Leganza. I'm at 66,000 miles and my mechanic says I should replace the timing belt. I drive the car less than 2,000 miles a year. Should I go ahead and replace it or see how...


replace it. that 60000 mile mark is the accepted time to replace a timing belt.No matter how little you drive, if it goes whil driving, you are looking at major engine damage.

Oct 05, 2011 | 2001 Daewoo Leganza

1 Answer

WHAT IS CORRECT TIMING MARKS FOR TIMING BELT INSTALLATION. 2000 NUBIRA 2.0 DOHC AND CRNKSHAFT MARKS. Thanks Joe


TIMING BELT
Removal
Disconnect negative battery cable. Disconnect intake air temperature sensor connector from intake air duct. Disconnect the air intake tube from the throttle body. Disconnect the breather tube from the valve cover. Remove resonator from throttle body. Remove air filter housing.
Raise and support the vehicle. Remove right front wheel. Remove right front splash shield from wheelwell. Remove serpentine accessory drive belt.
Remove crankshaft pulley bolts. It is NOT necessary to remove crankshaft sprocket center bolt. Remove crankshaft pulley. Lower vehicle.
Support engine assembly from above with Support Fixture (J-28467-B). Remove engine mount bracket from timing belt end of engine.Remove power steering hose clamp bolt, and position hose away from timing belt cover. Remove front timing belt cover. Using crankshaft center bolt, rotate crankshaft one full turn clockwise (as viewed from timing belt end of engine).
Align mark on crankshaft sprocket with notch at bottom of rear timing belt cover. See Fig. 4 . Align camshaft sprocket timing marks with notches on valve cover. See Fig. 5 .
CAUTION: Engine damage could result if camshaft sprockets are not properly aligned with notches on valve cover.
Loosen the automatic tensioner bolt. Use an Allen wrench to rotate tensioner and relieve tension on timing belt. Remove timing belt.
Fig. 4: Aligning Crankshaft Sprocket Timing Mark
Courtesy of DAEWOO MOTOR AMERICA, INC.
266999_tim_4.jpg
Fig. 5: Aligning Camshaft Sprocket Timing Marks
Courtesy of DAEWOO MOTOR AMERICA, INC.
266999_tim2_3.jpg
Installation
Ensure crankshaft and camshaft timing marks are still aligned. Install the timing belt. See Fig. 7 . Turn the timing belt tensioner counterclockwise to tension the timing belt. Turn tensioner until the pointer aligns with the notch on the rear timing belt cover. Tighten automatic tensioner bolt to specification. See TORQUE SPECIFICATIONS .
Using crankshaft center bolt, turn crankshaft clockwise (as viewed from timing belt end of engine) 2 full revolutions. Ensure timing belt tensioner pointer is still aligned with notch.
If timing belt tensioner is correctly aligned, install timing belt cover. See Fig. 3 . Install the engine mount bracket on the timing belt end of engine. Position power steering hose in place, and install clamp bolt. Install crankshaft pulley. Install serpentine accessory drive belt.
Install right front splash shield. Install right front wheel. Install air filter housing and resonator. Connect air intake temperature sensor connector. Connect negative battery cable.
Fig. 7: Identifying Timing Belt Routing
Courtesy of DAEWOO MOTOR AMERICA, INC.
266999_tim3_1.jpg
here

http://www.2carpros.com/questions/daewoo-leganza-2000-daewoo-leganza-timing-marks

Feb 17, 2011 | 2000 Daewoo Nubira

1 Answer

How to do a front end alignment. and what will i need to do this?


You will need an alignment rack and someone trained to operate it.
More expensive to buy than another car. On a 10 year old car prepare yourself to find that some of the front wheel components are shot and will have to be replaced before the alignment is done.

Sep 07, 2010 | 1999 Daewoo Leganza

3 Answers

1999 daewoo leganza timing belt keeps going out.


you could possible have a bad head maybe bent valves or push rods

Jul 29, 2010 | 1999 Daewoo Leganza

1 Answer

How do I program a new OEM key for my 2001 Daewoo Leganza so it locks and unlocks the doors?


hi this is how you do it
first off make sure the alarm system is off then put the key to be programed into the ignition turn ignition on then off within 5 seconds this is then in program mode press the lock or unlock button 3 times within 20 seconds and then the central locking should start working indicating the remote is now programed...hope this helps please vote thanks

May 22, 2010 | 2001 Daewoo Leganza

1 Answer

Torque spec for 2002 daewoo leganza for half shaft nut


THE LEGANZA MODELS TIGHTEN THE HALF SHAFT NUT TO 111 - 155 FT LBS .LOOSEN THE NUT RETIGHTEN TO 37 FT LBS.RETIGHTEN AN ADDITIONAL 60 DEGREES.STAKE THE NUT WITH A PUNCH AND HAMMER.THE NUT WILL NOT BE LOCKED IN PLACE UNTIL THE NUT HAS BEEN STAKED.

May 13, 2010 | 2002 Daewoo Leganza

1 Answer

What are the timing marks for a 2000 daewoo leganza


CLICK on the following LINK. It has the Timing Mark Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/daewoo/model/leganza/2000_daewoo_leganza_timing_belt_diagram_marks.htm

Feb 28, 2010 | 2000 Daewoo Leganza

1 Answer

2002 Daewoo Leganza help


It has a single din radio that can be purchased anywhere for under a hundred bucks. Check the antenna connection. Window regulators can be nought from Dr. auto parts. Go on ebay they go for about 40 bucks. Frank Kent Daewoo in Fort Worth Texas has the largest supply of Daewoo parts.
Good Luck

Nov 19, 2008 | 2002 Daewoo Leganza

1 Answer

Engine managment light stays on constantly aand when starting the car it cuts out after 5/6 times trying it starts. on long jornets in traffic the car feels like its gonig to cut out and the oil light...


Hi

I had this problem jusrt before last week-end with my Leganza. Sorry to say but it was the BM Bearing and it is now going to wrecker Heaven. If it is the same your motor is about to blow up.

Hope not for you

Aug 12, 2008 | 1999 Daewoo Leganza

Not finding what you are looking for?
2000 Daewoo Leganza Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Marvin
Marvin

Level 3 Expert

83083 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...