Question about 2003 Chevrolet Cavalier

1 Answer

I press the sterrin column in the middle where the horn button is and the horn does not sound

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 580 Answers

Usually the problem can be traced back to a bad grounding at the horn itself. Clean any ground wire or horn matting surface to the frame of the car. Good Luck!

Posted on Dec 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My horn sounds when i turn steering wheel but does not work when i actually press the horn. someone help as this is very annoying and awkward


this can be bypassed you will need to find the wire at the column for the horn, cut it and install a horn button on the dash. what it sounds like to me is there is a problem with the canceler in under the steering wheel, and they are hard to replace, and will set a airbag light ON.
you might be better off buying a steering wheel assembly from a junk yard, the dealer can turn off the airbag light..

Sep 10, 2015 | Cars & Trucks

1 Answer

How do I repair horn in the steering column


What is the problem with the horn. Check Fuse for Horn. Check Horn it is located under the bonnet. Near the front grill of the car. Check relay for horn most likely also located somewhere in engine compartment in a plastic box compartment with numerous relays. If horn not sounding should hear relay click when horn button pressed.
If horn is getting voltage at horn plug (positively switched horn design) then horn may need replacing.If negatively switched then horn connects to body of car when button pressed and other side of circuit has Plus 12 volts always on it.

Apr 13, 2015 | 2004 Mitsubishi Outlander LS

1 Answer

How do I wire a horn on a 1995 chev truck


Is there a problem with horn wiring in the steering column? The safest fix is to fix so the horn button on the steering will work. I'm not sure I understand your problem?

You could mount a separate horn button on the dash, but, that isn't the safest thing to do because your used to the horn button on the steering wheel.

If you mount a separate horn button, all you need is the horn ground that goes up the steering column, it is black. Find the harness under dash that goes into your steering column, black wire, just to test, use jumper wire from that wire to good ground, if the horn starts sounding, that's it. Run that wire to horn button. Also, you may need to run second ground from that horn button, if it doesn't ground through mounting bracket.

Mar 01, 2015 | Cars & Trucks

3 Answers

How can you use wire going to the horn from the relay and put on a push button switch


Find the wire at the bottom of the steering column that comes down from the horn button, or locate the wire at the horn relay.. Cut this wire and splice it to a wire that goes to one side of a push button switch. Connect the other side of the switch to the metal chassis of the car, which is ground. A metal part of the dashboard frame will usually work.Then when you press the button, it will activate the relay and sound the horn.

Sep 15, 2014 | 2002 Oldsmobile Alero

1 Answer

My 2001 chevy cavalier horn stopped working it would work when the car was off now it stopped completely what do u think it is ?


If you hear a click from the area of the glove box when you press the horn pad on the steering column, then the horn buttons and relay are working and the problem is most likely the horn itself. Unfortunately, the horn buttons in the steering pad are usually the issue. Replacement is tricky since you are working near the airbag. It is easier to find the horn wire at the base of the steering column and redirect it to a horn button you can buy at any auto parts store and fasten to dash next to the driver.

Aug 23, 2014 | Cars & Trucks

1 Answer

Horn sticking and sounding on 2005 ford f150


The button or wire is shorted in the column. Horn relays turn on with a ground signal from the button, so the wire only has to come loose or the wire get chaffed to cause the horn to blow.

Aug 04, 2017 | 2004 Ford F150

1 Answer

What wire ( yellow or blue ) powers the horn on a 1981 Ford F-150


The horn button supplies a ground to the horn relay.Start by pulling the plug at the base of the column,see if you can get a ground on one of the pins from the column when you pus the button.Or find the horn relay,and do the same test from there.You should find 12v on one on the relay socket pins,a ground on one(this will be the wire to the horn)and a ground on the 3rd pin when you press the horn button.

Jan 02, 2012 | 1981 Ford F 150

1 Answer

Horn doesn't work from steering column, but sounds


you need to either clean the slip ring for the horn button or replace them if they're eorn through.

Jul 24, 2009 | GMC Sierra 1500 Cars & Trucks

1 Answer

Horn will not sound from steering but okay otherwise


you need to Check the Wire inside the Steering wheel, When Grounded by pressing horn button the relay will send the 12 volts to Horn,

You Also could and Please Re-check the Color of wire for the Horn SHOULD be a Black Wire in the wire loom Under the Dash on the Column and If you Ground down the Black wire from Under the dash, You would Find out If it is In fact the Steering wheel it self,

you could also add a Second Button on the Dashboard

black wire to Button and then to Ground body,

Nov 01, 2008 | 1998 Oldsmobile Cutlass

2 Answers

Horn is not working, not getting any voltage to the steering column.....horn itself is good, used jumper to test it


sounds like your clockspring or a fuse test for power going into the clockspring please rate -jeff

Sep 01, 2008 | 1998 Jeep Wrangler

Not finding what you are looking for?
2003 Chevrolet Cavalier Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

83081 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...