Question about 2007 Kia Sedona LX Minivan

1 Answer

How do i replace rear winshield wiper arm on my 2007 Kia Sedona? I can get the nut off but the old arm will not come off the bolt.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 398 Answers

Get a screw driver and get under it.. it is just stuck

Posted on Dec 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace rear wiper arm on a 2009 Kia Rondo?


If you are replacing the entire arm assembly, there should be a plastic cover that will pry off exposing a nut that will have to be removed at the base of the wiper arm Remove the nut and wiggle the wiper arm up and down to help it release from the wiper motor pivot. Install the new arm in the proper location and retighten the nut

Jun 20, 2015 | Kia Cars & Trucks

1 Answer

How to replace rear wiper motor on 2007 chevy uplander


FIRST TURN OFF RADIO THEN DISCONNECT NEGATIVE BATTERY. MARK POSITIONS OF WIPER ARM ON THE LIFT GATE GLASS,THEN REMOVE WIPER ARM COVER AND NUT AT THE PUTSIDE OF THE LIFT GATE, THEN THE BEZEL, DONT SCRATCH PAINT ON THE LIFT GATE, REMOVE THE UPPER AND LOWER LIFTGATE INTERIOR TRIM PANELS, DISCONNECT THE ELECTRICAL CONNECTOR AT THE REAR WIPER MOTOR, THEN REMOVE THE TWO BOLTS SUPPORT WIPER MOTOR HOLD WIPER MOTOR IN PLACE WHILE REMOVING MOUNTING BOLTS THEN INSTALL NEW WIPER MOTOR THEN PUT EVERYTHING BACK VISA VERSA.

Jul 27, 2011 | 2007 Chevrolet Uplander

1 Answer

Replacing the wiper transmission mechanism on my 02 kia sedona. can't get the motor and blades to synch up. Is there a diagram for setting up the arms and motor?


where do i find the fuse for front/rear wipers on a kia sedona 2.9 crdi. When i am in the fuse box all i see is relays and no fuses.

Mar 27, 2010 | 2002 Kia Sedona

1 Answer

Kia Sedona 2005, windscreen wiper motor can be heard running but wipers do not move!


check to see if any movement from the wiper arm, maybe nut has come loose

Mar 01, 2010 | 2002 Kia Sedona

1 Answer

Wiper blades not moving, I can hear wiper motor working but arms dont work


the Kia Sedona is identical to my hyundai entorage minivan, this happen several times to me you have to tighten the nut that secures the wiper assembly to the motor, the shaft gets worn and losens up. you may have to replace the wiper motor.

Feb 27, 2010 | 2007 Kia Sedona LX Minivan

3 Answers

How easy is it to replace the front wiper motor on a 2004 ford escape ? Where is it located ?



Front Wiper Motor
Removal & Installation

NOTE A new wiper motor assembly comes with the linkage arm installed.
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove the windshield wiper mounting arm and pivot shaft
    WARNING Do not remove the wiper motor linkage arm from the wiper motor assembly. If the arm is removed, the wiper arms may not park in the correct location.
    NOTE Use a suitable tool to separate the wiper linkage arm from the wiper mounting arm and pivot shaft assembly.
  3. Remove the 3 bolts and the wiper motor.

    7f7866e.gif

    Fig. Wiper motor and linkage

To install:
  1. Install wiper motor and bolts.
  2. Tighten wiper motor bolts to 10 ft. lbs. (13 Nm).
  3. Install windshield wiper mounting arm and pivot shaft.
  4. Check wiper operation.

Rear Wiper Motor
- Removal & Installation
  1. Remove the rear pivot arm.
  2. Remove the rear wiper motor shaft nut cover
  3. Remove the rear wiper motor shaft nut.
  4. Open the lift gate window.
  5. Remove the rear wiper motor cover trim panel.
  6. Disconnect the electrical connector.
  7. Remove the 2 rear window wiper motor nuts
  8. Remove the rear window wiper motor.

    79be491.jpg
    Fig. Rear wiper motor view-2008 model shown, other years similar

To install:
  1. Install rear wiper motor and tighten mounting nuts to 62 inch lbs. (7 Nm).
  2. Reconnect the electrical connector.
  3. Install wiper motor cover trim panel.
  4. Install rear wiper pivot arm tighten nut to 53 inch lbs. (6 Nm).
  5. Install shaft nut cover.
  6. Check wiper operation.

Good luck (remember rated this post).

Feb 25, 2010 | 2004 Ford Escape

1 Answer

Kia Sedona rear os Shock 2.9TD 2001 is it easy to replace?


this job is easy enough the 4 bolts hold shock mounting plate undo plate with shock .attatched remove from car as you will probebly have to cut old shock to separate from plate due .to nuts being corroded on top of shock

Jan 31, 2010 | 2002 Kia Sedona

1 Answer

How do I replace the rear wiper arm on a 2008 Kia Sedona? I took the nut off, but the rear wiper arm doesn't come off; as if it were glued on. The new wiper doesn't show grooves like you would normally...


Your wiper arm has an interference fit which means it is essentially pressed on. The best way to remove it is to buy a wiper arm puller, which will have two arms that fit underneath the arm and a bolt that will push on the wiper post, they are pretty slick it should pop right off. Any auto parts store should be able to furnish you with the tool. If you're not going to use it alot, you might call your dealership (or friend with lots of tools) and see if they will pop it off for you.

Dec 05, 2009 | 2007 Kia Sedona LX Minivan

1 Answer

HOW DO I REPLACE A REAR WINDOW WIPER ON 2005 FORD ESCAPE?


Remove the rear pivot arm.
Lift the pivot arm to the upright position.
Slide the locking tab out.
Pull up and remove the pivot arm.
Remove the rear wiper motor shaft nut cover.
Remove the rear wiper motor shaft nut.
Remove the rear wiper motor cover.
Remove the rear wiper motor bracket nut.
Remove the bolt and the rear wiper motor.

Jan 29, 2009 | 2005 Ford Escape

1 Answer

Front wipers won't work


HI,CANNOT SUPPLY DRAWING,BUT IF YOU CAN MOVE WIPER ARMS FREEY ON SCREEN,ONE OF THE BALL JOINTS HAVE JUMPED OFF,YOU NEED TO REMOVE THE PLASTICS TO GET TO IT AND JUST SNAP JOINT BACK ON.THANKS

Dec 19, 2008 | 2003 Kia Sedona

Not finding what you are looking for?
2007 Kia Sedona LX Minivan Logo

852 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

78936 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...