Question about 1996 Chevrolet Blazer

2 Answers

WHEN I PUT IT IN 4 WHEEL DRIVE THE FRONT DOES NOT KICK IN

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

I had a similar problem. turned out it WAS the transfer case... BUT the failure in the transfer case effected the vacuume system. ended up buying a bunch of parts I didnt need etc. problem was most apperent due to a preceeding whirr sound that got louder as the brakes where applied (the vacuume actuator was partially engaging due to the vacuume problem) when I disconnected the vacuume lines from the transfer case found for some reason a lot of Tfluid had been pumped into the line itsself (not the vent but the vac for some reason) might check these things out... hope it helps

Posted on Dec 13, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

There is an actuator under the hood that is vacuum run and engages the front axle check both the vacuum actuator under the hood and the engagment piece on front axle.

Posted on Dec 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If 4 wheel drive won't kick in do that mean awd won't work ?


AWD is 4 wheel drive with a diff in the transfer case to allow for uneven running between front and rear axles
If you have a 4wd drive button then that simply locks the centre diff so that there is no equalization of differences in the front and rear axles

Mar 05, 2015 | Cars & Trucks

1 Answer

When i switch it into 4 wheel drive it makes a grinding noise and then wont kick back into 2 wheel


You should be totally stationary when you go from 2 to 4 wheel drive. There should be no grinding noise. Something has been broken, and I assume the transfer box is most likely, but it could also be the wheel hubs in front.

Sep 05, 2011 | 2003 Chevrolet TrailBlazer

1 Answer

I got my 2002 chevy blazer with ZR2 package into deep water and shorted out my 4 wheel drive control module (located under the kick plate on the passenger side). I took the module out and had it replaced...


what sounds like is happening is the front end is not disengaging, it will not hurt it to drive without the module, but you need to find out why the front diff. actuator is not releasing. their is a shift motor on the transfer case, module and switch in the cab, and actuator on the front diff. all are susceptable to water, I would suggest getting a manual on it to aid in diagnostics

Oct 13, 2010 | 2002 Chevrolet Blazer

2 Answers

How do i kick the 4 wheel drive in on my 92 wrangler i kno u have to put the shifter in to 4 weel low or high but it doesnt kick in does anything else have to happen


the hubs on the front wheels have a lock, turn this in the direction indicated by the arrow to lock the hub. When your'e done with 4x4 unlock the hubs again, they may be hot after a harsh or long drive in 4x4 so be aware of this.

Jan 14, 2010 | 1992 Jeep Wrangler

2 Answers

2000 blazer 4 wheel drive problem


It's most likely the "four wheel drive actuator" This is located on the front differential housing. It's cylindrical shaped and has a large hex (about
1-1/4") and two wires coming out of it. Usually they short out and blow the fuse but, I've also seen where they just quit working and sometimes they just get slow to work. The "actuator" has a heating element in it and it warms up, some sort gas, causing it to expand thus engaging the front wheels. In cold weather it may take a minute or so for it to engage, so put in four wheel drive and wait for a bit and see what happens.

Jan 05, 2010 | 2000 Chevrolet Blazer

1 Answer

My four wheel drive doesnt work in my 87 s10 blazer , like when i put it in park to put it in gear the shifter on the floor goes into gear but the four wheel drive doesnt turn on ? is there any fuses or...


sounds like either a fuse or the do u have locking hubs that need to be engaged also when using 4 wheel drive there is actually only 2 wheels turning usually passenger front and driver back sometimes u also have to drive backwards to engage and also disengage 4 wheel drive finally it may be a transfer case problem check drive shafts and u joints make sure they are engaged

Oct 23, 2009 | 1987 Chevrolet S-10 Pickup

1 Answer

Front wheel wont come off 1990 toyota 4 wheel drive


It appears you need to kick it off. Siezed up on the hub.

Mar 13, 2009 | 1990 Toyota Pickup

1 Answer

No 4 wheel drive


i had a ford explorer that did the same thing and after asking around about it they told me some of the newer cars you have to reverse an inch or two and it will kick in to 4 wheel drive. that might work

Dec 25, 2008 | 2000 Toyota Tundra

1 Answer

Front wheel will not engage for 4 wheel drive


very possible. Put your jeep on 4 jackstands and put in 4 wheel drive. if the front drive shaft turns pull the vacuum disconnect and check the shift fork. They usually break before the shift actuator.

Jun 28, 2008 | 1992 Jeep Wrangler

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

83081 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...