Question about 1995 Subaru Legacy
WRONG WRONG WRONG
Follow lower hose to Thermo. housing.
Stat Housing is mounted to the water pump.
Posted on Jan 12, 2010
You're going to lose some coolant, so have a bucket or other container ready. Follow the upper radiator hose to the point where it's connected to the engine. The hose is clamped to a metal housing which is bolted to the engine. Remove the bolts (not the hose) and lift the housing to expose the thermostat (may require a little prying with a screwdriver or similar tool). Note how the old thermostat is fitted (which end is up), lift it out of the engine, and then remove all traces of gasket from the housing and the engine. Install the new thermostat and gasket, replace the bolts, add coolant as necessary, and you're done.
Posted on Jan 04, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 29, 2011 | 2005 Chevrolet Malibu
Dec 19, 2010 | 2002 Buick Rendezvous
Oct 14, 2010 | Oldsmobile Alero Cars & Trucks
Please see my tip at http://www.fixya.com/cars/r5929960-s_thermostat .
Specific instructions for your car are as follows. Let me know if you get stuck or have more questions. 5.3L Engine
Removal & Installation
NOTE The thermostat is not serviceable separately. The water pump inlet and thermostat must be replaced as an assembly.
Oct 08, 2010 | 2004 GMC Envoy
Sep 18, 2010 | 2002 Pontiac Aztek
Sep 09, 2010 | 2003 Pontiac Sunfire
Apr 04, 2010 | 1999 Oldsmobile Alero
Apr 04, 2010 | 2000 Chrysler Concorde
Feb 02, 2010 | 2001 Chrysler 300M
Sep 23, 2009 | 2001 Chevrolet Venture
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: