Question about 2002 Ford F250 Super Duty SuperCab

1 Answer

I have a 2002 f-250 ford and all lights work but brake lights have already installed multi funcuctioning brake switch,all fuse and bulbs have been tested and are fine

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

When you say multifunction brake switch im a little confused because the multifunction switch is on the steering column and the brake switch is on the brake pedal arm but either of these can cause this problem so if you have replaced one you may suspect the other but sometimes you just have to test at each point in the circuit for voltage until you find the culprit

Posted on Dec 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 ford explorer sport trac the brake lights and hazards,blinkers .i have changed the multi functional switch and relay switch still not working i have also checked bulbs and fuses


Check and clean the brake switch, look near the top of the brake pedal arm you will see a switch remove it, clean it, replace it. If issues are still there check your wiring for good connections, recheck fuses in car and under the hood.

Apr 18, 2017 | Ford Explorer Sport Trac Cars & Trucks

2 Answers

Brake lights on my 2000 Ford mustang won't work and fuses are fine and already replaced stop light switch. I'm stumped.


Does your high mount brake light work, if so then the multi function switch may be the problem. The brake lights work through it.

Jul 14, 2016 | 2000 Ford Mustang

2 Answers

Why no right side turn signal or brake light?


Check the bulbs, and turn signal relay under dash. And just to be sure about the fuse replace it with new 1 to if it start.

Oct 02, 2015 | 2000 Ford Mustang

4 Answers

2008 Ford Escape Brake Lights don't work and back turn signals


Sounds as if the bulbs are bad, but could also be a failed multi-purpose switch.

Feb 09, 2018 | 2008 Ford Escape

1 Answer

Brake lights don't work on 95 crown victoria


Battery power is applied through 15A fuse 1 in the I/P fuse panel. It passes through the brake on/off switch and is routed through the multi-function switch to the stop lamps. When the brake on/off switch is closed, the stop lamps light. Possible failures include the fuse, the brake on/off switch, the multi-function switch, and the filaments of the multi-purpose rear lights.

Sep 08, 2012 | 1995 Ford Crown Victoria

2 Answers

I have a 98 f150 xlt. My left rear turn signal and brake light has stopped working but the running lights work on the same bulb. Ive replaced the bulb nothing, replaced the socket and nothing, even checked...


Have you checked the socket to see if 12 volts is reaching the socket for brake light citcuit? Probe the wires with a 12 volt test light probe (avail from any parts store for about $6)

Apr 13, 2012 | 1998 Ford F150 Regular Cab

1 Answer

On a 1999 ford f 250 where is brake lite fuse located in fuse bo x


If none of your brake lights including the 3rd or high mount light are not working.You will need to check fuse no.13(20amp) in the under dash fuse panel,then check for power to the brake light switch on the top of the brake pedal.You should have power on the light green/red wire then when you press pedal you should have power on the light green wire also. If the 3rd light works but not the other brake lights then your problem will be the multi-funtion switch(turn signal switch) or the wiring from there to the brake lamp sockets or the bulbs themself. If you need further assistance please let me know. If this helped you then please feel free to rate the solution accordingly. Thanks, Midwest-tek

Aug 31, 2010 | Ford F-250 Cars & Trucks

1 Answer

My tail lights are NOT working but my brake lights


bulbs are good the the headlamp switch is bad. the brake light switch is good if those light up

Mar 02, 2010 | 1997 Ford Taurus

2 Answers

Turn signals work but the brake lights do not how do i get them to work? i already changed the flasher.


I have a 2001 Ford F150, my brake lights dont work. Ive replaced the bulbs, checked the fuses,and the brake switch on side of the brake pedal was replaced. I still dont have any brake lights. My third brake light works fine, along with my running lights,flashers, blinkers.

Jun 18, 2009 | 1985 Ford F150

1 Answer

Fender brake lights not working


You should probably check the multi-function switch. This is the turn signal switch assembly. The brake lights on most all vehicles, are routed through the turn signal switch, and then go to the rear of the vehicle. This is done because the brake light bulb on many vehicles is used as a turn signal bulb as well, and there has to be a way to break the connection from the brake light circuit to allow the turn signal to operate on the same bulb. Use caution when checking or removing the multi-function switch assembly, as you must remove the protective cover from the steering column, and there is an air bag harness located inside. If in doubt, always refer to the manufacturer's service guidelines for making any repairs in or around the steering column.

Nov 10, 2008 | 1997 Ford Explorer AWD

Not finding what you are looking for?
2002 Ford F250 Super Duty SuperCab Logo

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

83810 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...