Question about 1999 Buick LeSabre

1 Answer

1999 LeSabre, had the drivers side view mirror knocked off... How do you replace it? Do I need to take the door pannel off? mirroe is electric but not heated. Thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,985 Answers

Yes you need to remove the door panel,but you can just let it hang no need unhooking any wires,there is only two nuts holding the mirror fast.

Posted on Dec 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I REPLACE THE REAR VIEW MIRROR ON MY 1999 BUICK LESABRE LIMITED


  • Push the mirror lens upward so it faces the roof of your Buick LeSabre.

  • Place the eight-pointed star head of the Torx driver into the setscrew located in the base of the rearview mirror. Turn the Torx driver counterclockwise. This releases the clamping pressure on the mirror.

  • Slide the mirror upwards to remove it from its metal bracket.

  • Place the base of the replacement mirror against the windshield, directly above the metal bracket. Slide the mirror down into the bracket. The bracket has a groove on each side into which the mirror will slide.Secure the mirror to the bracket by tightening the setscrew clockwise with the Torx driver.



  • May 04, 2011 | 1999 Buick LeSabre

    1 Answer

    2007 Chrysler Sebring, knocked the drivers side mirror off backing out of my garage. Is it easy to install or need to take to the dealership?


    This is not hard to replace at all, most of the time the door panel doesnt have to be removed , just the small cover behind the mirror inside the door, the only problem is you must paint the mirror to match the car if its painted, i replace and paint mirrors all the time, buy one online and you will pay about 30.00 for it, heres a picture of it and you will not need to remove the door panel just the small cover that covers the mirroe nuts, the wire plugs in to back of the mirror, this is easy to do,make sure when looking for mirror you get what you have like if its heated or power. heres a picyure of your mirror good luck, and good day.johnjohn2_88.jpg

    Mar 31, 2011 | 2007 Chrysler Sebring Sedan

    2 Answers

    Someone hit my drivers side mirror an brokr it off, How to fix, both broke off on mirror housing?


    Remove inside door panel,then mirror

    Buy new mirror at dealer or salvage yard

    Mar 14, 2011 | 1994 Buick LeSabre

    1 Answer

    How do i change my drivers side view mirror i took off the inner door panel , now what...


    should be 2 or 3 10mm nuts that hold mirror to door frame,possibly covered by large black plastic plugs,electrical connection if powered will be very close to mounting hardware for mirror to door

    Oct 03, 2009 | 1998 Buick LeSabre

    1 Answer

    Need to get door panel off to replace side view mirro on passenger side.


    You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. then pop off the cover beside the mirror and remove the bolts

    Apr 30, 2009 | 2006 GMC Sierra 2500HD 2WD

    1 Answer

    Replacing drivers side rear view mirro in Mitsubishi Galant 1997


    On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

    Apr 04, 2009 | 2007 Mitsubishi Galant SE Sedan

    1 Answer

    Replacing a cracked side-view mirror


    well the best way is to take the inside mirro cap off there are 3 bolts that need to be taken out 10mm if its not accessible from there you need to loosenthe trim panel and take it off look around for hidden pop ups take the pop ups out and take the screws out then from there pull the bottom of the door trim out and slide arms around the edges and pull out there then pull up and outThanks for using fix ya. Please rate my response thank you very much

    Jan 31, 2009 | 2005 Nissan Murano

    2 Answers

    Driver side mirro is hot


    it is a heated mirror. usually comes on with defroster setting

    Dec 31, 2008 | 2001 Lexus IS 300

    1 Answer

    Passengers side rear view mirro replacement


    On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

    Nov 30, 2008 | 1991 Oldsmobile Cutlass Ciera

    1 Answer

    1999 Rodeo Electric Windows Switch Panel - Drivers Side


    gotta remove the door panels there a panel removing tool looks like a snakes tounge but bigger these pop out your door pannel
    they take the panel pins out without damageing the door pannel
    disconnect electric switches

    the electric assembly in side is rivited in so is your going to remove gears you need to drill out revits then work it out of door panel

    May 28, 2008 | 1999 Isuzu Rodeo

    Not finding what you are looking for?
    1999 Buick LeSabre Logo

    271 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    79024 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6927 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...