Question about 1985 Dodge Pickup 4WD
THE DRIVE ARM HAS COME OFF THE MAIN DRIVE ON THE WIPER MOTOR, PIAN TO GET TO BUT SIMPLE TO FIX
Posted on Dec 09, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if you open the hood look towards the base of the windshield, you should see the linkages for the wiper arms. make sure the linkages are all in-tact and nothing fell off. if the linkages are all good, see if you can move the passenger side wiper with your hand, if it moves freely or with little resistance check the nut/bolt that hols it on at the end of the wiper arm. see if the nut/bolt is loose. tighten if needed. also you can remove the nut/bolt and check the splines on the wiper arm where it presses onto the stud and see if they are wiped out.
Posted on Feb 19, 2009
I recently had the same problem of the drivers side wiper not working. My boyfriend (a mechanic) took the windshield cowl off and looked to see what was going on. He originally thought that maybe something had slipped off. I'm going to describe what he found in layman's terms. When you take off the wiper blade arms from the wiper transmission assembly unit there are these silver colored nubs with grooves on them (one for each wiper). What he found was that on mine the grooves were stripped so that the wiper on the drivers side wouldn't catch and go across the windshield while the other wiper worked fine. What we think that happened is that I left the wipers on when I shut off the car and since we had a huge snowstorm the wiper transmission bound up and stripped the nubs when I turned on the vehicle the next day and let it warm up. I had tried for the past week to find a used replacement wiper transmissions assembly but was not successful. I just ordered the part from my local Hyundai dealer at a cost of $180. I will at least save on the labor, as my boyfriend can handle that part. If you try to get the part used, be careful. There was a product change mid-year. Prior to June 2004 (If I remember correctly) is one part number and Santa Fe's manufactured after that date is a different part. I needed the earlier Santa Fe part. You can look at the body panel between the front and back doors on the driver's side for the production date of your vehicle there is a metal decal with the vin, your color codes, and other information.
Posted on Mar 19, 2009
Tips for a great answer:
Mar 05, 2015 | 2007 Toyota Corolla
Dec 21, 2012 | 2005 Chrysler Pacifica
Sep 21, 2010 | 2000 Nissan Altima
Feb 26, 2010 | 2005 Peugeot 405
May 06, 2009 | 1995 Nissan Altima
Dec 21, 2008 | 1999 Subaru Forester
Sep 24, 2017 | 1985 Dodge Pickup 4WD
63 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: